LIST OF PUBLICATIONS

Books

  1. J. Aboudi: "Mechanics of Composite Materials - A Uni ed Micromechanical Ap- proach". Elsevier, Amsterdam, 1991.
  2. G. Cederbaum, I. Elishako , J. Aboudi, and L. Librescu, "Random Vibration and Reliability of Composite Structures", Technomic, Lancaster, Pennsylvania, 1992.

Special Issues of Refereed Journals

  1. M-J. Pindera, S.M. Arnold, J. Aboudi and D. Hui (Eds), "Use of Composites in Func- tionally Graded Materials", Composites Engineering 4, No. 1, 1994.
  2. M-J. Pindera, J. Aboudi, S.M. Arnold and W.F. Jones (Eds), "Use of Composites in Multi-Phased and Functionally Graded Materials", Composites Engineering 5, No. 7, 1995.
  3. M-J. Pindera, J. Aboudi, and, A. Glasser (Eds), "Use of Composites in Multi-Phased and Functionally Graded Materials", Composites: Part B: (Engineering) 28B, No. 1/2, 1997.

Published papers and papers accepted for publication

  1. Z. Alterman and J. Aboudi, "The Common Spectrum of Computed Seismograms", Israel J. Technology, 6, 187-199, 1968.
  2. Z. Alterman and J. Aboudi, "Pulse Propagation in a Laterally Heterogeneous Fluid Sphere by Finite Di erence Methods", J. Phys. Earth, 16, 173-193, 1968.
  3. Z. Alterman and J. Aboudi, "Impulsive Sound Propagation in a Fluid Sphere of Vari- able Internal Friction", Israel J. Technology, 7, 135-147, 1969.
  4. Z. Alterman and J. Aboudi, "Seismic Pulse in a Layered Sphere: Normal Modes and Surface Waves", J. Geophys. Res., 74, 2618-2626, 1969.
  5. Z. Alterman and J. Aboudi, "Seismic Source in a Layered Sphere: Re ected and Di racted Pulses", J. Geophys. Res., 74, 5903-5922, 1969.
  6. Z. Alterman and J. Aboudi, "Point Source and Applied Force in a Fluid Sphere", Israel J. Technology, 7, 319-328, 1969.
  7. Z. Alterman and J. Aboudi, "Source of Finite Extent, Applied Force and Couple in an Elastic Half-Space", Geophys. J. Roy. Astr. Soc., 21, 47-64, 1970.
  8. Z. Alterman and J. Aboudi and F.C. Karal, "Pulse Propagation in a Laterally Hetero- geneous Solid Elastic Sphere", Geophys. J. Roy. Astr. Soc., 21, 243-269, 1970.
  9. J. Aboudi, "The Motion Excited by an Impulsive Source in an Elastic Half-Space with Surface Obstacle", Bull. Seism. Soc. Am., 61, 747-763, 1971.
  10. J. Aboudi, "Numerical Simulation of Seismic Sources", Geophysics, 36, 810-821, 1971. JACOB ABOUDI, Ph.D 5
  11. J. Aboudi, "Wave Propagation from a Spherical Cavity Embedded in an Elasto-Plastic Medium", J. Eng. Math., 5, 279-287, 1971.
  12. Z. Alterman and J. Aboudi, "Propagation of Elastic Waves Caused by an Impulsive Source in a Half-Space with Corrugated Surface", Geophysics J. Roy. Astr. Soc., 24, 59-76, 1971.
  13. D. Censor and J. Aboudi, "Scattering of Sound Waves by Rotating Cylinders and Spheres", J. Sound Vib., 19, 437-444, 1971.
  14. D. Censor, J. Aboudi and D. Neulander, Re ection and Transmission of Elastic Waves by a Moving Slab", Appl. Scienti c Res., 25, 313-327, 1972.
  15. J. Aboudi, "Propagation of Transient Pulses from a Spherical Cavity in a Viscoelastic Medium", Int. J. for Num. Meth. in Eng., 4, 289-299, 1972.
  16. J. Aboudi, "The Response of an Elastic Half-Space to the Dynamic Expansion of an Embedded Spherical Cavity", Bull. Seism. Soc. Am., 62, 115-127, 1972.
  17. J. Aboudi and D. Censor, "Scattering of Elastic Waves by Moving Objects", J. Acoust. Soc. Am., 52, 203-209, 1972.
  18. J. Aboudi, "Rayleigh Wave Propagation in a Viscoelastic Half-Space", J. Eng. Math., 6, 313-321, 1972.
  19. J. Aboudi and Y. Weitsman, "Impact-De ection by Oblique Fibers in Sparsely Rein- forced Composites", J. Appl. Math. Phys. (ZAMP), 23, 828-844, 1972.
  20. J. Aboudi, "Stress Wave Propagation in a Laminated Plate under Impulsive Loads", Int. J. Solids and Struct., 9, 217-232, 1973.
  21. J. Aboudi and Y. Benveniste, "One Dimensional Finite Amplitude Wave Propagation in a Compressible Elastic Half-Space", Int. J. Solids and Struct., 9, 363-378, 1973.
  22. A. Zohar and J. Aboudi, "The Free Vibrations of a Thin Circular Finite Rotating Cylinder", Int. J. Mech. Sci., 15, 269-278, 1973.
  23. J. Aboudi, "Elastic Waves in a Half-Space with a Thin Barrier", J. Eng. Mech. Div., ASCE, 99, 69-83, 1973.
  24. J. Aboudi, "A Mixture Theory for a Laminated Plate under Impulsive Loads", J. Sound Vib., 29, 355-364, 1973.
  25. J. Aboudi, and Y. Benveniste, "Finite Amplitude One-Dimensional Wave Propagation in a Thermoelastic Half-Space", Int. J. Solids and Struct., 10, 293-308, 1974.
  26. J. Aboudi, "A Mixture Theory for a Thermoelastic Laminated Medium, with Appli- cation to a Laminated Plate under Impulsive Loads", J. Sound Vib., 33, 187-200, 1974.
  27. Y. Benveniste and J. Aboudi, "Nonlinear Wave Propagation in a Thin Viscoelastic Rod", Meccanica, 11, 283-290, 1974. JACOB ABOUDI, Ph.D 6
  28. Y. Benveniste and J. Aboudi, "The Nonlinear Response of a Fiber Reinforced Thin Plate Under Dynamic Loading", Fibre Science and Technology, 7, 223-236, 1974.
  29. J. Aboudi and Y. Weitsman, "A Numerical Solution for the Problem of an Impacted Fiber-Reinforced Viscoelastic Half-Space", Comp. Meth. Appl. Mech. Eng., 4, 349- 366, 1974.
  30. Y. Benveniste and J. Aboudi, "The Dynamic Response of a Laminated Plate Under Large Deformations", J. Sound Vib., 38, 425-436, 1975.
  31. J. Aboudi, and Y. Benveniste, "A Nonlinearly Thermoelastic Half-Space Under Time Dependent Normal and Shear Loading", Int. J. Solids Struct., 11, 709-724, 1975.
  32. J. Aboudi, and Y. Benveniste, "Uniaxial Wave Propagation in a Nonlinear Thermo- viscoelastic Medium with Temperature Dependent Properties", Int. J. Solids Struct., 11, 725-740, 1975.
  33. Y. Weitsman and J. Aboudi, "Stress Functions for Fiber- Reinforced Materials and the E ects of Fiber-Inextensibility", Israel J. Tech., 13, 39-45, 1975.
  34. J. Aboudi, "Wave Propagation in a Thermorheologically Simple Solid Slab", Acta Mech., 22, 181-195, 1976.
  35. J. Aboudi, and Y. Benveniste, "A Superimposed Mixture Theory forWave Propagation in a Biaxially Fiber-Reinforced Composite", J. Sound Vib., 41, 163-175, 1975.
  36. J. Aboudi, and Y. Benveniste, "The Nonlinear Lamb Problem", Comp. Meth. Appl. Mech. Eng., 6, 319-334, 1975.
  37. J. Aboudi, "Two-Dimensional Wave Propagation in a Nonlinear Elastic Half-Space", Comp. Meth. Appl. Mech. Eng., 9, 25-46, 1976.
  38. Y. Benveniste and J. Aboudi, "A Mixture Theory forWave Propagation in a Laminated Medium with Debonding", J. Sound. Vib., 46, 473-482, 1976.
  39. J. Aboudi, "Numerical Solution of Dynamic Stresses Induced by Moving Cracks", Comp. Meth. Appl. Mech. Eng., 9, 301-316, 1976.
  40. J. Aboudi, "Moving Force on a Nonlinearly Elastic Material", Acta Mech. 27, 127-144, 1977.
  41. J. Aboudi, "The Dynamic Stresses Induced by Moving Interfacial Cracks", Comp. Meth. Appl. Mech. Eng., 10, 303-323, 1977.
  42. Y. Benveniste and J. Aboudi, "A Nonlinear Mixture Theory for the Dynamic Re- sponse of a Laminated Composite under Large Deformations", J. Appl. Math. Phys. (ZAMP), 28, 1067-1084, 1977.
  43. J. Aboudi, "The Dynamic Indentation of an Elastic Half-Space by a Rigid Punch", Int. J. Solids Struct., 13, 995-1005, 1977.
  44. J. Aboudi, "The Dynamic Contact Stresses Caused by the Impact of a Nonlinear Elastic Half-Space by an Axisymmetrical Projectile", Comp. Meth. Appl. Mech. Eng., 13, 189-204, 1978. JACOB ABOUDI, Ph.D 7
  45. Y. Benveniste and J. Aboudi, "Crack Propagation in a Laminated Composite Material Modeled by a Two-Dimensional Mixture Theory", Acta Mech. 29, 213-227, 1978.
  46. J. Aboudi, "The Dynamic Stress Induced by the Propagation of Skew Cracks", Comp. Meth. Appl. Mech. Eng., 15, 181-199, 1978.
  47. Y. Benveniste and J. Aboudi, "A Two-Dimensional Mixture Theory for Biaxially Fiber Reinforced Composites with Application to Dynamic Crack Problems", Int. J. Eng. Sci., 16, 615-636, 1978.
  48. J. Aboudi, "Numerical Methods in Elastodynamics", in Modern Problems in Elastic Wave Propagation, J. Miklowitz and J.D. Achenbach (eds.), Wiley Interscience, 1978, pp. 45-65.
  49. J. Aboudi, "A Numerical Solution to the Problem of Dynamic Indentation of an Elastic Plate by a Rigid Punch", J. Comput. Phys., 29, 318-327, 1978.
  50. J. Aboudi, "The Impact-Contact Problem of Two Nonlinearly Elastic Bodies", Acta Mech., 33, 81-95, 1979.
  51. J. Aboudi, "The Dynamic Indentation and Impact of a Viscoelastic Half-Space by an Axisymmetrical Rigid Body", Comp. Meth. Appl. Mech. Eng., 20, 135-150, 1979.
  52. J. Aboudi, "The Dynamic Contact with Perfect Adhesion and Frictional Slip Between a Rigid Indenter and an Elastic Half-Space", Acta Mech., 35, 147-155, 1980.
  53. J. Aboudi, "The Dynamic Indentation of an Elastic-Viscoplastic Work Hardening Slab by a Rigid Punch", Int. J. Eng. Sci., 18, 619-629, 1980.
  54. J. Aboudi and S.R. Bodner, "Dynamic response of a Slab of Elastic Viscoplastic Ma- terial that Exhibits Induced Plastic Anisotropy", Int. J. Eng. Sci., 18, 801-813, 1980.
  55. D. Maron, W. Zijl and J. Aboudi, "Hydrodynamic and Transfer Characteristics in Free Interface Film due to Time-Dependent Disturbance at the Entry", Int. J. Heat Mass Transfer, 23, 927-941, 1980.
  56. J.Aboudi and Y. Benveniste, "An Average Theory for the Dynamic Behaviour of a Laminated Elastic-Viscoplastic Medium Under General Loading", Int. J. Solids Struc- tures, 17, 69-81, 1981.
  57. J. Aboudi, "E ective Sti ness Theory for a Laminated Elastic Viscoplastic Work- Hardening Composite", Int. J. Solids Structures, 17, 421-431, 1981.
  58. J. Aboudi and J.D. Achenbach, "Rapid Mode-III Crack Propagation in a Strip of Viscoplastic Work-Hardening Material", Int. J. Solids Structures, 17, 879-890, 1981.
  59. J. Aboudi and Y. Benveniste, "An Average Theory for the Dynamic Behavior of a Lam- inated Elastic-Viscoplastic Work-Hardening Medium", J. Appl. Math. Mech (ZAMM), 61, 314-324, 1981.
  60. J. Aboudi, "Generalized E ective Sti ness Theory for Non-elastic Laminated Compos- ites", Int. J. Eng. Sci., 19, 1269-1281, 1981. JACOB ABOUDI, Ph.D 8
  61. J. Aboudi, "Generalized E ective Sti ness Theory for the Modeling of Fiber-reinforced Composites", Int. J. Solids Structures, 17, 1005-1018, 1981.
  62. J. Aboudi and J.D. Achenbach, "Transition from Brittle to Ductile Fracture for a Rapidly Propagating Crack", Pressure Vessels and Piping Conference, ASME 81-PVP- 16, 1981.
  63. J. Aboudi and J.D. Achenbach, "Arrest of Mode III Fast Fracture by a Transition from Elastic to Viscoplastic Material Properties", J. Appl. Mech. 48, 509-514, 1981.
  64. J. Aboudi and J.D. Achenbach, "Fast Fracture of a Strip of ViscoplasticWork-Hardening Material", in Analytical and Experimental Fracture Mechanics, Sih and Mirabile (eds), pp. 773-783, Noordho , 1981.
  65. Y. Benveniste and J. Aboudi, "Mixture Theories for Modeling the Dynamic Response of Composite Materials", Int. J. Eng. Sci. 20, 193-216, 1982.
  66. J. Aboudi, "A Continuum Theory for Fiber-Reinforced Elastic Viscoplastic Compos- ites", Int. J. Eng. Sci., 20, 605-621, 1982.
  67. J. Aboudi and J.D. Achenbach, "Numerical Analysis of Fast Mode-I Fracture of a Strip of Viscoplastic Work-Hardening Material", Int. J. Fracture, 21, 133-147, 1983.
  68. J. Aboudi and J.D. Achenbach, "Arrest of Fast Mode-I Fracture in an Elastic-Viscoplastic Transition Zone", Eng. Fract. Mech. 18, 109-119, 1983.
  69. J. Aboudi, "E ective Constitutive Equations for Fiber-Reinforced Viscoplastic Com- posites Exhibiting Anisotropic Hardening", Int. J. Eng. Sci. 21, 1081-1096, 1983.
  70. J. Aboudi, "The E ective Moduli of Short-Fiber Composites", Int. J. Solids Structures. 19, 693-707, 1983.
  71. S.R. Bodner and J. Aboudi, "Stress Wave Propagation in Rods of Elastic-Visco plastic Material", Int. J. Solids Structures, 19, 305-314, 1983.
  72. J. Aboudi, "E ective Constitutive Equations for Fiber-Reinforced Viscoplastic Com- posites", in Mechanics of Composite Materials: Recent Advances, pp.57-71, Pergamon Press, Oxford 1983.
  73. J. Aboudi, "E ective Behavior of Inelastic Fiber-Reinforced Composites", Int. J. Eng. Sci. 22, 439-449, 1984.
  74. J. Aboudi, "The E ective Thermoelastic Constants of Short-Fiber Composites", Fiber Sci. Tech., 20, 211-225, 1984.
  75. J. Aboudi and Y. Benveniste, "Constitutive Relations for Fiber Reinforced Inelastic Laminated Plates", J. Appl.Mech., 51, 107-113, 1984.
  76. J. Aboudi, "Elastoplasticity Theory for Porous Materials", Mech. Materials 3, 81-94, 1984.
  77. J. Aboudi, "Minimechanics of Tri-Orthogonally Fiber-Reinforced Composites: Overall Elastic and Thermal Properties, Fiber Sci. Tech. 21, 277-293, 1984. JACOB ABOUDI, Ph.D 9
  78. Y. Benveniste and J. Aboudi, "A Continuum Model for Fiber Reinforced Materials with Debonding", Int. J. Solids Struct. 20, 935-951, 1984.
  79. J. Aboudi, "The E ective Thermomechnical Behaviour of Inelastic Fiber-Reinforced Materials", Int. J. Eng. Sci. 23, 773-787, 1985.
  80. J. Aboudi and Y. Benveniste, "The Mechanical Behavior of Elastic Plastic Fiber- Reinforced Laminated Plates", in Mechanical Characterization of Load Bearing Fiber Composite Laminates, pp. 65-70, Elsevier Appl. Sci. Pub. 1985.
  81. J. Aboudi, "Inelastic Behavior of Metal-Matrix Composites at Elevated Temperature", Int. J. Plasticity, 1, 359-372, 1985.
  82. J. Aboudi, "Constitutive Relations for the Thermomechanical Behavior of Fiber-Reinforced Inelastic Composites", Composite Structures, 4, 315-334, 1985.
  83. J. Aboudi, "Overall Finite Deformation of Elastic and Elastoplastic Composites", Mech. Materials, 5, 73-86, 1986.
  84. J. Aboudi, "HarmonicWaves in Composite Materials", Wave Motion, 8, 289-303, 1986.
  85. J. Aboudi, "Elastoplasticity Theory for Composite Materials", Solid Mech. Arch., 11, 141-183, 1986.
  86. J. Aboudi and Y. Benveniste, "The E ective Moduli of Cracked Bodies in Plane De- formations", Eng. Fracture Mech., 26, 171-184, 1987.
  87. J. Aboudi, "Sti ness Reduction of Cracked Solids", Eng. Fracture Mech., 26, 637-650, 1987.
  88. J. Aboudi, "Damage in Composites: Modeling of Imperfect Bonding", Composite Sci. Tech., 28, 103-128, 1987.
  89. J. Aboudi, "Transient Waves in Composite Materials", Wave Motion, 9, 141-156, 1987.
  90. J. Aboudi, "Closed Form Constitutive Equations for Metal Matrix Composites", Int. J. Eng. Sci. 25, 1229-1240, 1987.
  91. J. Aboudi, "Constitutive Relations for Cracked Metal Matrix Composites", Mech. Materials. 6, 303-315, 1987.
  92. M-J. Pindera, J. Aboudi and C.T. Herakovich, "Nonlinear Response of Boron/Aluminum under Combined Loading", Proc. of IUTAM/ICM Symposium on Yielding, Damage and Failure of Anisotropic Solids, Villard-de-Lans (J.P.Boehler, ed.), France, 1987, Mechanical Engineering Publications, 235-249, 1990.
  93. J. Aboudi, "Wave Propagation in Damaged Composite Materials", Int. J. Solids and Structures. 24, 117-138, 1988.
  94. J. Aboudi, "Constitutive Equations for Elastoplastic Composites with Imperfect Bond- ing", Int. J. Plasticity, 4, 103-125, 1988.
  95. M-J. Pindera and J. Aboudi, "Micromechanical Analysis of Yielding of Metal Matrix Composites", Int. J. Plasticity. 4, 195-214, 1988. JACOB ABOUDI, Ph.D 10
  96. J. Aboudi, S.W. Lee and C.T. Herakovich, "Three-Dimensional Analysis of Laminates with Cross Cracks", J. Appl. Mech., 55, 389-397, 1988.
  97. C.T. Herakovich, J. Aboudi, S.W. Lee and E.A. Strauss, "Damage in Composite Lam- inates: E ects of Transverse Cracks", Mech. Materials, 7, 91-107, 1988.
  98. J. Aboudi, "Micromechanical Analysis of the Strength of Unidirectional Fiber Com- posites", Composite Sci. Tech., 33, 79-96, 1988.
  99. J. Aboudi, "Nonlinear Wave Propagation in Laminated Composites", in Wave Propa- gation in Structural Composites", ASME AMD-vol. 90, 1988, pp.133-140.
  100. C.T. Herakovich, J. Aboudi, S.W. Lee and E.A. Strauss, "2-D and 3-D Damage E ects in Cross-Ply Laminates", in Mechanics of Composite Materials - 1988, ASME AMD- vol. 92, 143-147.
  101. J. Aboudi, "Micromechanics Prediction of Fatigue Failure of Composite Materials", J. Reinforced Plastics & Composites, 8, 150-166, 1989.
  102. N.K. Chandiramani, L. Librescu and J. Aboudi, "The Theory of Orthotropic Vis- coelastic Shear Deformable Composite Flat Panels and their Dynamic Stability", Int. J. Solids and Structure, 25, 465-482, 1989.
  103. J. Aboudi, "Micromechanical Analysis of Composites by the Method of Cells", Appl. Mech. Rev. 42, 193-221, 1989.
  104. J. Aboudi and G. Cederbaum, "Analysis of Viscoeleastic Laminated Composite Plates", Composite Structures, 12, 243-256, 1989.
  105. G. Cederbaum and J. Aboudi, "Micro-to-Macro Analysis of Viscoelastic Laminated Plates", in Composite Structures Vol. 5, (I.H. Marshall, ed.), pp. 779-739, 1989.
  106. G. Cederbaum and J. Aboudi, "Dynamic Response of Viscoelastic Laminated Plates", J. Sound Vib., 132, 225-238, 1989.
  107. Y. Sadkin and J. Aboudi, "Viscoelastic Behavior of Thermorheologically Complex Resin Matrix Composites", Composite Sci. & Tech., 36, 351-365, 1989.
  108. J. Aboudi, "Micromechanical Analysis of Fibrous Composites with Coulomb Frictional Slippage between the Phases", Mech. Materials, 8, 103-115, 1989.
  109. M-J. Pindera and J. Aboudi, "Micromechanical Investigation of the Convexity of Yield Surfaces of Metal Matrix Composites", in Advances in Plasticity 1989, A.S. Khan and M. Tokuda (eds.), 129-132.
  110. J. Aboudi, "The Nonlinear Behavior of Unidirectional and Laminated Composites - A Micromechanical Approach", J. Reinf. Plastics & Composites, 9, 13-32, 1990.
  111. M-J. Pindera, C.T. Herakovich, W. Becker, and J. Aboudi, "Nonlinear Response of Unidirectional Boron/Aluminum", J. Comp. Mat., 24, 2-21, 1990.
  112. J. Aboudi, "Dynamic Response of Composites with Coulomb Frictional Slippage be- tween the Phases", J. Sound Vib. 138, 35-46, 1990. JACOB ABOUDI, Ph.D 11
  113. J. Aboudi, "Micromechanical Prediction of Initial and Subsequent Yield Surfaces of Metal Matrix Composites", Int. J. Plasticity, 6, 471-484, 1990.
  114. J. Aboudi, G. Cederbaum and I. Elishako , "Dynamic Stability Analysis of Viscoelastic Plates by Lyapunov Exponents", J. Sound Vib. 139, 459-467, 1990.
  115. J. Aboudi, "Micromechanical Characterizaton of the Nonlinear Viscoelastic Behavior of Resin Matrix Composites", Composite Sci. & Tech. 38, 371-386, 1990.
  116. M-J. Pindera and J. Aboudi, "Recent Developments in the Micromechanics of Ad- vanced Composites", in: Developments and Design with Advanced Materials, G.C. Sih, S.V. Hoa and J.T. Pindera (eds.), Elsevier, 65-78, 1990.
  117. C.T. Herakovich, J. Aboudi and J.L. Beuth, "A Micromechanical Composite Yield Model Accounting for Residual Stresses", in: Inelastic Deformation of Composite Ma- terial, G.J. Dvorak (ed.), Springer-Verlag, 375-387, 1991.
  118. J. Aboudi and M-J. Pindera, "Matrix Mean-Field and Local-Field Approaches in the Analysis of Metal Matrix Composites", in: Inelastic Deformation of Composite Mate- rial, G.J. Dvorak (ed.), Springer-Verlag, 761-779, 1991.
  119. J. Aboudi, "Micro-Failure Criteria for Coated-Fiber Composites", J. Reinf. Plastics & Composites 10, 146-157, 1991.
  120. M. Paley and J. Aboudi, "Viscoplastic Bifurcation Buckling of Plates", AIAA J. 29, 627-632, 1991.
  121. M-J. Pindera, J. Aboudi and J.B. Brayshaw, "Micromechanical Investigation of the Convexity of Yield Surfaces of Metal Matrix Composites", Int. J. Plasticity, 7, 549-566, 1991.
  122. D. Shalev and J. Aboudi, "Postbuckling Analysis of Viscoelastic Laminated Plates Using Higher-Order Theory", Int. J. Solids & Structures, 27, 1747-1755, 1991.
  123. J. Aboudi, "Micro-Failure Prediction of the Strength of Composite Materials under Combined Loading", J. Reinforced Plastics & Composites, 10, 495-503, 1991.
  124. G. Cederbaum, J. Aboudi and I. Elishako , "Dynamic Instability of Shear Deformable Viscoelastic Laminated Plates by Lyapunov Exponents", Int. J. Solids & Structures, 28, 317-327, 1991.
  125. M. Paley and J. Aboudi, "Overall Instantaneous Properties of Metal Matrix Compos- ites", Composite Sci. & Tech., 41, 411-429, 1991.
  126. M. Paley and J. Aboudi, "Plastic Buckling of Metal Matrix Laminated Plates", Int. J. Solids & Structures, 28, 1139-1154, 1991.
  127. M. Paley and J. Aboudi, "Inelastic Thermal Buckling of Metal Matrix Laminated Plates", J. Thermal Stresses, 14, 479-497, 1991.
  128. J. Aboudi and I. Hevroni, "Wave Propagation in Angle-Ply Laminates", J. Sound Vib., 150, 15-24, 1991. JACOB ABOUDI, Ph.D 12
  129. D. Larom, C.T. Herakovich and J. Aboudi, "Dynamic Response of Pulse Loaded Lam- inated Composite Cylinders", Int. J. Impact Eng., 11, 233-248, 1991.
  130. J. Aboudi, "Recent Developments in the Analysis of Metal Matrix Composites by the Method of Cells", in: Anisotropy and Localization of Plastic Deformation, J.P.Boehler and A.K.Khan (eds.), pp.1-6, Elsevier, 1991.
  131. G. Cederbaum and J. Aboudi, "Reliability of Composites Based on Micromechanically Predicted Strength and Fatigue Criteria", in: Composite Structures 6, I.H. Marshall (ed.), pp.75-88, Elsevier, 1991.
  132. J. Aboudi, J.S. Hidde and C.T. Herakovich, "Thermo-Mechanical Response Predictions for Metal Matrix Composite Laminates", in: Mechanics of Composites at Elevated and Cryogenic Temperatures, S.N.Singhal, W.F.Jones and C.T.Herakovich (eds.), pp.1-8, ASME AMD-vol. 118, 1991. Appeared also in: Science & Eng. of Composite Materials 2, 151-169, 1993.
  133. M. Paley and J. Aboudi, "Creep Buckling of Inelastic Plates", in: Creep in Structures, M. Zyczowski (ed.), Springer-Verlag, 595-600, 1991.
  134. J. Aboudi and M. Paley, "Plastic Buckling of ARALL Plates", Composite Structures, 22, 217-221, 1992.
  135. M. Paley and J. Aboudi, "Micromechanical Analysis of Composites by the Generalized Cells Model", Mech. Materials, 14, 127-139, 1992.
  136. J. Aboudi, "Response Prediction of Composites Composed of Sti ening Fibers and Nonlinear Resin Matrix", Composites Sci. & Tech., 46, 51-58, 1993.
  137. J. Aboudi, "Constitutive Behavior of Multiphase Metal Matrix Composites with In- terfacial Damage by the Generalized Cell Model", in: G.Z. Voyiadjis, ed., Damage in Composite Materials, Elsevier, Amsterdam, pp. 3-22, 1993.
  138. E. Feldman and J. Aboudi, "Postbuckling Analysis and Imperfection Sensitivity of Metal Matrix Laminated Cylindrical Panels", Composite Structures, 25, 241-248, 1993.
  139. R. Gilat, E. Feldman and J. Aboudi, "Axisymmetric Response of Nonlinearly Elastic Cylindrical Shells to Dynamic Axial Loads", Int. J. Impact Engng., 13, 545-554, 1993.
  140. E. Feldman and J. Aboudi, "Postbuckling Analysis and Imperfection Sensitivity of Vis- coplastic Plates and Cylindrical Panels", Thin-Walled Structures, 17, 273-290, 1994.
  141. R. Gilat and J. Aboudi, "Dynamic Buckling of Viscoplastic Plates and Shells under Cylindrical Bending", J. Sound & Vibration, 174, 323-334, 1994.
  142. J. Aboudi, "Modeling of Interfacial Damage in Composites", Chapter 7 in R. Talreja, ed., Damage Mechanics of Composite Materials (Composite Materials Series #9; Series ed.: R.B. Pipes), pp.245-294, Elsevier, Amsterdam, 1994.
  143. J. Aboudi, S.M. Arnold and M-J. Pindera, "Response of Functionally Graded Com- posites to Thermal Gradients", Composites Eng. 4, 1-18, 1994.
  144. E. Feldman and J. Aboudi, "Postbuckling Analysis of Metal-Matrix Laminated Plates", Composites Eng. 4, 151-167, 1994. JACOB ABOUDI, Ph.D 13
  145. J. Aboudi, F. Mirzadeh and C.T. Herakovich, "Response of Metal Matrix Laminates with Temperature-Dependent Properties", J. Composites Tech. & Res. 16, 68-76, 1994.
  146. J. Aboudi, M-J. Pindera and S.M. Arnold, "Elastic Response of Metal Matrix Compos- ites with Tailored Microstructures to Thermal Gradients", Int. J. Solids & Structures, 31, 1393-1428, 1994.
  147. R. Gilat and J. Aboudi, "Dynamic Buckling of Metal Matrix Composite Plates and Shells under Cylindrical Bending", Composites Structures, 28, 459-469, 1994.
  148. M-J. Pindera, J. Aboudi and S.M. Arnold, "Thermo-Inelastic Analysis of Functionally Graded Materials : Inapplicability of the Classical Micromechanics Approach", in : Inelasticity and Micromechanics of Metal Matrix Composites, G.Z. Voyiadjis and J.W. Ju (eds.), pp. 273-305, Elsevier, 1994.
  149. J.M. Duva, J. Aboudi and C.T. Herakovich, "A Probabilistic Micromechanics Model for Damaged Composites", ASME AMD-Vol 185, 1994.
  150. M-J. Pindera, J. Aboudi and S.M. Arnold, "Limitations of the Uncoupled, RVE-Based Micromechanical Approach in the Analysis of Functionally Graded Composites", Me- chanics of Materials, 20, 77-94, 1995.
  151. E. Feldman and J. Aboudi, "Thermal Posbuckling of Metal Matrix Laminated Plates", J. Thermal Stresses 18, 197-218, 1995.
  152. R. Gilat and J. Aboudi, "Dynamic Inelastic Response and Buckling of Metal Matrix Composite In nitely Wide Plates due to Thermal Shocks", Mech. of Composite Mater. & Struct. 2, 257-271, 1995.
  153. R. Gilat and J. Aboudi, "Dynamic Buckling of Nonlinear Resin Matrix Composite Structures", Composite Structures 32, 81-88, 1995.
  154. J. Aboudi, M-J. Pindera and S.M. Arnold, "A Coupled Higher Order Theory for Func- tionally Graded Composites with Partial Homogenization", Composites Eng. 5, 771- 792, 1995.
  155. J. Aboudi, "Micromechanical Analysis of Thermo-Inelastic Multiphase Short-Fiber Composites", Composites Eng. 5, 839-850, 1995.
  156. J. Aboudi, M-J. Pindera and S.M. Arnold, "Thermo-Inelastic Response of Functionally Graded Composites", Int. J. Solids & Structures 32, 1675-1710, 1995.
  157. M-J. Pindera, J. Aboudi and S.M. Arnold , "Recent Advances in the Mechanics of Functionally Graded Composites". In Aerospace Thermal Structures and Materials for a New Era (Progress in Astronautics and Aeronautics, Vol. 168), E. A. Thornton (Ed.), pp. 181-203. The American Institute of Aeronautics and Astronautics, Inc., Washington, D.C., 1995.
  158. J. Aboudi, M-J. Pindera and S.M. Arnold, "Thermoelastic Theory for the Response of Materials Functionally Graded in Two Directions", Int. J. Solids & Structures 33, 931-966, 1996. JACOB ABOUDI, Ph.D 14
  159. D. Shalev and J. Aboudi, "Coupled Micro to Macro Analysis of a Composite That Hosts Embedded Piezoelectric Actuators", J. Intelligent. Mat. Sys. & Structures 7, 15-24, 1996.
  160. R. Gilat and J. Aboudi, "Thermomechanical Coupling E ects on the Dynamic Inelastic Response and Buckling of Metal Matrix In nitely Wide Plates", Composite Structures 35, 49-63, 1996.
  161. D. Shalev, J. Aboudi and M. Tur, "A Micro-Macro Model for the E ects of Thermo- Mechanical Fields on Optical Fibers Embedded in a Laminated Composite Plate with Applications to Sensing", Mech. Composite Materials & Structures 3, 297-320,1996.
  162. J.M. Duva, J. Aboudi, and C.T. Herakovich, "A Probabilistic Micromechanics Model for Damaged Composites", J. Engineering Materials & Tech. 118, 548-553, 1996.
  163. J. Aboudi and C.T. Herakovich, "An Interfacial Damage Model for Titanium Matrix Composites", in : Damage and Interfacial Denonding in Composites, G.Z. Voyiadjis and D.H. Allen (Eds.), pp. 149-165, Elsevier, 1996.
  164. J. Aboudi, M-J. Pindera and S.M. Arnold, "Thermoplasticity Theory for Bidirection- ally Functionally Graded Materials", J. Thermal Stresses, 19, 809-861, 1996.
  165. J. Aboudi, "Micromechanical Analysis of Composites by the Method of Cells - Update", Applied Mech. Rev. 49, S83-S91, 1996.
  166. J. Aboudi, M-J. Pindera and S.M. Arnold, "Microstructural Optimization of Function- ally Graded Composites Subjected to Thermal Gradient via the Coupled Higher-Order Theory", Composites Part B: (Engineering) 28B, 93-108, 1997.
  167. J. Aboudi, "The Response of Shape Memory Alloy Composites", Smart Mater. Struct. 6, 1-9, 1997.
  168. E. Feldman and J. Aboudi, "Buckling Analysis of Functionally Graded Plates Sub- jected to Uniaxial Loading", Composite Structures 38, 29-36, 1997.
  169. M-J. Pindera, J. Aboudi, and S.M. Arnold, "Microstructural E ects in Functionally Graded Thermal Barrier Coating", in : Functionally Graded Materials 1996, I. Shiota and M.Y. Miyamoto (Eds), pp. 113-121, Elsevier, 1997.
  170. M-J. Pindera, J. Aboudi and S.M. Arnold, "Higher-Order Micro-Macrostructural The- ory for the Analysis of Functionally Graded Material", in : Advanced Multilayered and Fibre-Reinforced Composites, Y.M. Haddad (Ed.), pp. 111-132, Kluwer Academic Publishers, 1998.
  171. M-J. Pindera, J. Aboudi and S.M. Arnold, "Thermomechanical Analysis of Func- tionally Greaded Thermal Barrier Coatings with Di erent Microstructural Scales", J. American Ceramic Soc. 81, 1525-1536, 1998.
  172. J. Aboudi, "Micromechanical Prediction of the E ective Coecients of Thermo-Piezoelectric Multiphase Composites", J. Intelligent. Mat. Sys. & Structures 9, 713-722, 1998.
  173. J. Aboudi, "E ective Behavior and Dynamic Response Modeling of Electro-Rheological and Magneto-Rheological Fluid Composites", Smart Mater. Struct. 8, 106-115, 1999. JACOB ABOUDI, Ph.D 15
  174. C.T. Herakovich and J. Aboudi, "Thermal E ects in Composites". In: Thermal Stresses 5, R.B. Hetnarski, (Ed.), Chapter 1, pp. 1-142. Lastran Corporation, Rochester, NY, 1999.
  175. J. Aboudi "Micromechanical Prediction of the Response of Electrostrictive Multiphase Composites", Smart Mater. Struct. 8, 663-671, 1999.
  176. T.O. Williams and J. Aboudi, "A Fully Thermo-Mechanical Micromechanical Model", J. Thermal Stresses 22, 841-873, 1999.
  177. J. Aboudi, M-J. Pindera and S.M. Arnold, "Higher-Order Theory for Functionally Graded Materials", Composites: part B: (Engineering) 30, 777-832, 1999.
  178. T.O. Williams and J. Aboudi, "A Generalized Micromechanics Model with Shear- Coupling", Acta Mech. 138, 131-154, 1999.
  179. J. Aboudi, and S.M. Arnold, "Micromechanical Modeling of the Finite Deformation of Thermoelastic Multiphase Composites", Math. & Mech. of Solids 5, 75-99, 2000.
  180. J. Aboudi, "Micromechanical Modeling of Finite Viscoelastic Multiphase Composites", J. Appl. Math. Phys. (ZAMP) 51, 114-134, 2000.
  181. J. Aboudi and T.O. Williams, "A Coupled Micro-Macromechanical Analysis of Hy- grothermoelastic Composites", Int. J. Solids & Structures 37, 4149-4179, 2000.
  182. M-J. Pindera, J. Aboudi and S.M. Arnold, "The E ect of Interface Roughness and Ox- ide Film Thickness on the Inelastic Response of Thermal Barrier Coatings to Thermal Cycling", J. Materials Science & Engineering A. 284, 158-175, 2000.
  183. R. Gilat and J. Aboudi, "Parametric Stability of Elastic Composite Plates by Lyapunov Exponents", J. Sound & Vibration, 235, 627-637, 2000.
  184. R. Gilat and J. Aboudi, "Buckling Analysis of Composite Plates". In: Advances in the Mechanics of Plates and Shells, D. Durban, D. Givoli and J.G. Simmonds (Eds.), pp. 135-150. Kluwer Academic Publishers, 2001.
  185. R. Gilat, T.O. Williams and J. Aboudi, "Buckling of Composite Plates by Global-Local Theory", Composites: part B: (Engineering) 32, 229-236, 2001.
  186. J. Aboudi, M-J. Pindera and S.M. Arnold, "Linear Thermoelastic Higher-Order Theory for Periodic Multiphase Materials". J. Appl. Mech. 68, 697-707, 2001.
  187. J. Aboudi, "Micromechanical Prediction of the Finite Thermoelastic Response of Rub- berlike Matrix Composites", J. Appl. Math. Phys. (ZAMP) 52, 823-846, 2001.
  188. J. Aboudi, "Micromechanical Analysis of Fully Coupled Electro-Magneto-Thermo- Elastic Multiphase Composites". Smart Mater. Struct. 10, 867-877, 2001.
  189. R. Gilat and J. Aboudi, "The Lyapunov Exponents as a Quantitative Criterion for the Dynamic Buckling of Composite Plates". Int. J. Solids & Structures 39, 467-481, 2002. JACOB ABOUDI, Ph.D 16
  190. J. Aboudi, "Micromechanical Analysis of the Fully Coupled Finite Thermoelastic Re- sponse of Rubberlike Matrix Composites". Int. J. Solids & Structures 39, 2587-2612, 2002.
  191. M-J. Pindera, J. Aboudi and S.M. Arnold, "Analysis of Spallation Mechanism in Ther- mal Barrier Coatings with Graded Bond Coats Using the Higher-Order Theory for FGM's". Eng. Fracture Mech. 69, 1587-1606, 2002.
  192. Z. Menachem, N. Croitoru and J. Aboudi, "Improved Mode Model for Infrared Wave Propagation in a Troidal Dielectric Waveguide and Applications". Opt. Eng. 41, 2169-2180, 2002.
  193. J. Aboudi, M-J. Pindera and S.M. Arnold, "Higher-Order Theory for Periodic Multi- phase Materials with Inelastic Phases". Int. J. of Plasticity 19, 805-847, 2003.
  194. J. Aboudi, "Micromechanical Analysis of the Finite Elastic-Viscoplastic Response of Multiphase Composites". Int. J. Solids & Structures 40, 2793-2817, 2003.
  195. J. Perry and J. Aboudi, "Elasto-Plastic Stresses in Thick-Walled Cylinders". J. Press. Vessels & Tech. 125, 248-252, 2003.
  196. Z. Menachem, N. Croitoru and J. Aboudi, "Mode Model for Infrared propagation in a Toroidal Type of Waveguide and Applications". J. Optoelectronics & Advanced Materials 5, 1373-1379, 2003.
  197. M-J. Pindera, J. Aboudi and S.M. Arnold, "Analysis of Locally Irregular Composites Using High-Fidelity Generalized Method of Cells". AIAA J. 41, 2331-2340, 2003.
  198. S.M. Arnold, B.A. Bednarcyk and J. Aboudi, "Analysis of Internally Cooled Structures using a Higher Order Theory". Computers & Structers 82, 659-688, 2004.
  199. B.A. Bednarcyk, S.M. Arnold, J. Aboudi and M-J. Pindera, "Local Field E ects in Titanium Matrix Composites Subject to Fiber-Matrix Debonding". Int. J. Plasticity 20, 1707-1737, 2004.
  200. J. Aboudi, "Micromechanically Based Constitutive Equations for Shape-Memory Fiber Composites Undergoing Large Deformations". Smart Mater. Struct. 13, 828-837, 2004.
  201. J. Aboudi, "The Generalized Method of Cells and High-Fidelity Generalized Method of Cells Micromechanical Models - A Review". Mech. Adv. Materl. Struct. 11, 329-366, 2004.
  202. J. Aboudi, "Micromechanics-Based Thermoviscoelastic Constitutive Equations for Rubber- Like Matrix Composites at Finite Strains". Int. J. Solids & Struct. 41, 5611-5629, 2004.
  203. R. Gilat and J. Aboudi, "Dynamic Response of Active Composite Plates: Shape Mem- ory Alloy Fibers in Polymeric/Metallic Matrices". Int. J. Solids & Struct. 41, 5717- 5731, 2004.
  204. J. Aboudi and M-J. Pindera, "High-Fidelity Micromechanical Modeling of Continu- ously Reinforced Elastic Multiphase Materials Undergoing Finite Deformation". Math. & Mech. of Solids 9, 599-628, 2004. JACOB ABOUDI, Ph.D 17
  205. D.T. Butler, J. Aboudi, M-J. Pindera, "Role of Material Constitutive Model in Simu- lating the Reusable Launch Vehicle Thrust Cell Linear Response". J. Aerospace Eng. 18, 28-41, 2005.
  206. M-J. Pindera, J. Aboudi and S.M. Arnold, "Analysis of the Spallation Mechanism Suppression in Plasma-Sprayed TBCs Through the Use of Heterogeneous Bond Coat Architectures". Int. J. Plasticity 21, 1061-1096, 2005.
  207. D.T. Butler, M-J. Pindera and J. Aboudi, "Thermo-Mechanical Analysis of RLV Thrust Cell Liners with Homogeneous and Graded Coatings". Materials Science Forum 492-493, 429-434, 2005.
  208. . J. Aboudi and R. Gilat, "Micromechanical Analysis of Lattice Blocks". Int. J. Solids & Struct. 42, 4372-4392, 2005.
  209. J. Aboudi, "Hysteresis Behavior of Ferroelectric Fiber Composites". Smart Mater. Struct. 14, 715-726, 2005.
  210. J. Aboudi, "Micromechanically Established Constitutive Equations for Multiphase Ma- terials with Viscoelastic-Viscoplastic Phases". Mech. Time-Dependent Mater. 9, 121- 145, 2005.
  211. R. Gilat and J. Aboudi, "Thermal Buckling of Activated Shape Memory Reinforced Laminated Plates". Smart Mater. Struct. 15, 829-838, 2006.
  212. J. Aboudi and R. Gilat, "Buckling Analysis of Fibers in Composite Materials by Wave Propagation Analogy". Int. J. Solids & Struct. 43, 5168-5181, 2006.
  213. J. Aboudi and Y. Freed, "Two-Way Thermomechanically Coupled Micromechanical Analysis of Shape Memory Alloy Composites". J. Mech. Mater. Struct. 1, 937-955, 2006.
  214. M. Ryvkin and J. Aboudi, "The E ect of a Fiber Loss in periodic Composites". Int. J. Solids & Struct. 44, 3497-3513, 2007.
  215. Y. Freed, J. Aboudi and R. Gilat, "A thermomechanically micromechanical modeling of prestressed concrete reinforced with shape memory alloys bers". Smart Mater. Struct. 16, 717-727, 2007.
  216. H.A. Bruck, R. Gilat, J. Aboudi and A.L. Gershon, "A New Approach for Optimizing the Mechanical Behavior of Porous Microstructures for Pouros Materials by Design". Modelling Simul. Mater. Sci. Eng. 15, 653-674, 2007.
  217. J. Aboudi, "Micromechanical Analyses of Smart Composite Materials". In: Progress in Smart Materials and Structures, editor: P.L. Reece, pp. 291-361, 2007, Nova Science Publishers, New York.
  218. M. Ryvkin and J. Aboudi, "A Continuum Approach to the Analysis of the Stress Field in a Fiber Reinforced Composite with a Transverse Crack". Int. J. Solids & Struct. 44, 6826-6841, 2007.
  219. M. Ryvkin and J. Aboudi, "Analysis of Local Thermomechanical E ects in Fiber- Reinforced Periodic Composites". Int. J. Fract. 145, 229-236, 2007. JACOB ABOUDI, Ph.D 18
  220. B.A. Bednarcyk, J. Aboudi and S.M. Arnold, "The Equivalence of the Radial Return and Mendelson Methods for Integrating the Classical Plasticity Equations". Comput. Mech. 41, 733-737, 2008.
  221. M. Ryvkin and J. Aboudi, "Three-Dimensional Continuum Analysis for a Unidirec- tional Composite with a Broken Fiber". Int. J. Solids & Struct. 45, 4114-4129, 2008.
  222. J. Aboudi, "Finite Strain Micromechanical Analysis for Thermoelastoplastic Multi- phase Materials" J. Mech. Mater. Struct. 3, 809-829, 2008.
  223. J. Aboudi, "Thermomechanically Coupled Micromechanical Analysis of Multiphase Composites". J. Eng. Math. 61, 111-132, 2008.
  224. Y. Freed and J. Aboudi, "Micromechanical Investigation of Plasticity-Damage Cou- pling of Concrete Reinforced by Shape Memory Alloy Fibers". Smart Mater. Struct. 17, 015046(14pp), 2008.
  225. Y. Freed, J. Aboudi and R. Gilat, "Investigation of Shape Memory Alloy Honeycombs by Means of a Micromechanical Analysis". Modelling Simul. Mater. Sci. Eng. 16, 055002(22pp), 2008.
  226. Y. Freed, L. Banks-Sills and J. Aboudi, "On the Transformation Toughening of a Crack Along an Interface Between a Shape Memory Alloy and an Isotropic Medium". J. Mech. Phys. Solids 56, 3003-3020, 2008.
  227. B.A. Bednarcyk, J. Aboudi, S.M. Arnold and R.M. Sullivan, "Analysis of Space Shuttle Spray-On-Foam Insulation with Internal Pore Pressure". J. Eng. Mater. Tech. 130, 041005-1-041005-16, 2008.
  228. J. Aboudi, "Finite Strain Micromechanical Modeling of Multiphase Composites". Int. J. Multiscale Comput. Eng. 6, 411-434, 2008.
  229. R. Gilat and J. Aboudi, "Postbuckling of Layered Composites by Finite Strain Mi- cromechanical Analysis". Int. J. Multiscale Comput. Eng. 6, 469-481, 2008.
  230. Y. Freed and J. Aboudi, "Thrmomechanically Coupled Micromechanical Analysis of Shape Memory Alloy Composites Undergoing Transformation Induced Plasticity". J. Intell. Mater. Sys. & Struct. 20, 23-38, 2009.
  231. J. Aboudi, "Finite Strain Micromechanical Analysis of Rubber-Like Matrix Composites Incorporating the Mullins Damage E ect". Int. J. Damage Mech. 18, 5-29, 2009.
  232. Y. Freed and J. Aboudi, "Micromechanical Prediction of the Two-Way Shape Memory E ect in Shape Memory Composites". Int. J. Solids Struct. 46, 1634-1647, 2009.
  233. R. Haj-Ali and J. Aboudi, "Nonlinear Micromechanical Formulation of the High Fi- delity Generalized Method of Cells". Int. J. Solids Struct. 46, 2577-2592, 2009.
  234. J. Aboudi, "The E ect of Evolving Damage on the Finite Strain Response of Inelastic and Viscoelastic Composites". Materials 2, 1858-1894, 2009.
  235. B.A. Bednarcyk, J. Aboudi and S.M. Arnold, "Micromechanics Modeling of Compos- ites Subjected to Multiaxial Progressive Damage in the Constituents". AIAA J. 48, 1367-1378, 2010. JACOB ABOUDI, Ph.D 19

Reports

  1. J. Aboudi and M-J. Pindera, "Micromechanics of Metal Matrix Composites using the Generalized Method of Cells Model (GMC): User's Guide", NASA CR 190756, 1992.
  2. J. Aboudi, M-J. Pindera and S.M. Arnold, "Thermoelastic Response of Metal Matrix Composites with Large-Diameter Fibers Subjected to Thermal Gradients", NASA TM 106344, 1993.
  3. J. Aboudi, "Micromechanical Analysis of Thermo-Inelastic Multiphase Short-Fiber Composites", NASA CR 195290, 1994.
  4. J. Aboudi, M-J. Pindera and S.M. Arnold, "Thermoelastic Theory for the Response of Materials Functionally Graded in Two Directions with Applications to the Free-Edge Problem", NASA TM 106882, 1995.
  5. J. Aboudi, and S.M. Arnold, "Micromechanical Modeling of the Finite Deformation of Thermoelastic Multiphase Composites", NASA TM 107531, 1997.
  6. T. Williams and J. Aboudi, "A Generalized Micromechanics Model with Shear-Coupling", Los Alamos National Lab., LA-UR-97-605, 1997.
  7. M-J. Pindera and J. Aboudi, "HOTCFGM-1D: A Coupled Higher-Order Theory for Cylindrical Structural Components with Through-Thickness Functionally Graded Mi- crostructures", NASA CR 207927, 1998.
  8. T.O. Williams and J. Aboudi, "A Fully Thermo-Mechanical Micromechanical Model", Los Alamos National Lab., LA-UR-98-3691, 1998.
  9. J. Aboudi, "Micromechanical Prediction of the E ective Coecients of Thermo-Piezoelectric Multiphase Composites", NASA CR 1998-208521, 1998.
  10. M-J Pindera, J. Aboudi and S.M. Arnold, "The E ect of Interface Roughness and Ox- ide Film Thickness on the Inelastic Response of Thermal Barrier Coatings to Thermal Cycling", NASA/TM-1999-209770, 1999.
  11. J. Aboudi, "Micromechanical Prediction of the E ective Behavior of Fully Coupled Electro-Magneto-Thermo-Elastic Multiphase Composites", NASA/CR-2000-209787, 2000.
  12. M-J. Pindera and J. Aboudi, "HOTCFGM-2D: A Coupled Higher-Order Theory for Cylindrical Structural Components With Bi-Directionally Graded Microstructures", NASA/CR-2000-210350, 2000.
  13. S.M. Arnold, B.A. Bednarcyk and J. Aboudi, "Thermo-Elastic Analysis of Internally Cooled Structures Using a Higher Order Theory". NASA/TM-2001-210702, 2001.
  14. J. Aboudi and M-J Pindera, "Impact of Functionally Graded Cylinders: Theory", NASA/CR-2001-210967, 2001.
  15. J. Aboudi, M-J Pindera and S.M. Arnold, "High-Fidelity Generalized Method of Cells for Inelastic Periodic Multiphase Materials", NASA TM-2002-211469, 2002. JACOB ABOUDI, Ph.D 20
  16. J. Aboudi, "High-Fidelity Micromechanical Modeling of Elastic Multiphase Materials Undergoing Finite Deformations: Theory". Engineering Materials Concepts, Report No. 2002-01, 2002.
  17. J. Aboudi and M-J Pindera, "High-Fidelity Micromechanical Modeling of Elastic Mul- tiphase Materials Undergoing Finite Deformations: Model Validation and User's Guide". Engineering Materials Concepts, Report No. 2002-02, 2002.
  18. J. Aboudi, "High-Fidelity Micromechanical Modeling of Viscoelastic Multiphase Ma- terials Undergoing Finite Deformations: Theory". Engineering Materials Concepts, Report No. 2003-01, 2003.
  19. J. Aboudi and M-J Pindera, "Three-Dimensional Higher-Order Theory for FGMs with Anisotropic Elastic Phases". Engineering Materials Concepts, Report No. 2003-02, 2003.
  20. M-J Pindera, J. Aboudi and S.M. Arnold, "Analysis of Plasma-Sprayed Thermal Bar- rier Coatings with Homogenious and Heterogenious Bond Coats Under Spatially Uni- form Cyclic Thermal Loading". NASA/TM-2003-210803, 2003.
  21. S.M. Arnold, B. Bednarcyk and J. Aboudi, "Comparison of the Computational E- ciency of the Original Versus Reformulated High-Fidelity Generalized Method of Cells". NASA/TM-2004-213438, 2004.
  22. B. Bednarcyk, J. Aboudi and S.M. Arnold, "The Equivalence of the Radial Return and Mendelson Methods for Integrating the Classical Plasticity Equations". NASA/TM- 2006-214331, 2006.
  23. B. Bednarcyk, J. Aboudi and P.W. Yarrington, "Determination of the Shear Stress Distribution in a Laminate From the Applied Shear Resultants - A Simpli ed Shear Solution" NASA/CR-2007-215022, 2007.

line

Return to:
[ Jacob Aboudi's home | School of Mechanical Engineering | Faculty of Engineering ]

line

Last modified: June 2010