book

 

Publications

A.       BOOKS

 

1.     I.I. Beilis, V.A. Bityurin, U.A. Vasiljeva, V.V. Kirillow, G.A. Lyubimov, S.A. Medin, A.E. Sheindlin, B.Ya. Shumjatsky, MHD energy conversion. Physical and technical aspects, edited by V.A. Kirillin and A.E. Sheyndlin, Moscow: Nauka, 1983, (368 pp.) English translation: New York, N.Y., American Institute of Aeronautics and Astronautics, Inc., 1986.

2.     I.I. Beilis, “Theoretical Modeling of Cathode Spot Phenomena” in Vacuum Arc Science and Technology, R.L.Boxman, P. Martin, D. Sanders (editors)   Park Ridge, NJ, Noyes Publications, 1995).

3.     M. Keidar, I.I. Beilis,"Plasma Engineering: Applications from Aerospace to Bio and Nanotechnology", (Acad Press, Elsevier, London-NY, 2013).

 

B.      ARTICLES

a)       Chapters in Collections

1.                   I.I. Beilis, G.N. Braterskaya, V.I. Rakhovsky, O.K. Teodorovich, Investigation of the erosion of metalceramics contacts based on silver and nickel for low current discharge. Chapter in book: Electrical contacts, USSR Moscow, Nauka, 1967 (pp. 179-187).

2.                   I.I. Beilis, G.V. Levchenko, V.S. Potokin, V.I. Rakhovsky, On the heat condition of high-power contacts switchgear for operation at the high current moving arc discharge. Chapter in book: Electrical Contacts, Moscow, Nauka, 1967 (pp. 26-32).

3.                   I.I. Beilis, V.I. Rakhovsky, Conformity to natural laws: Development of cathode spot and elementary processes in a near-cathode region of arc. Chapter in book: Mathematical and theoretical problem in an contacts technologics. USSR, Alma-Ata, 1969 (pp. 79-85).

4.                   I.I. Beilis, Determination of the parameters of the near-cathode region of arc discharges. Chapter in book: Electrical contacts, M. Nauka, 1972 (pp. 104-106).

5.                   I.I. Beilis, V.I. Rakhovsky, On the question of the possibility to investigate by a probe the arc discharge with electron beam. Chapter in book: Electrical contacts, M. Nauka, 1973 (pp. 75-79).

6.                   I.I. Beilis, V.I. Rakhovsky, Heating of the electrodes of an arc discharge. Chapter in book. Electrical contacts. M. Nauka, 1973 (pp. 20-23).

7.                   I.I. Beilis, V.V. Kanzel, V.I. Rakhovsky, On explosive model of fast moving cathode spot. Chapter in book: Electrical contacts. Moscow, Nauka, 1975 (pp. 14-16).

8.                   I.I. Beilis, Theoretical analysis of cathode phenomena in vacuum arc discharge, Chapter in book: Part I., 3th ISSAP, Lodz, Poland, Thech. Univ. Sept. 1977 (pp. 194-200).

9.                   I.I. Beilis, Theoretical analysis of cathode phenomena in vacuum arc discharge, Chapter in book: Part II, 3th ISSAP, Lodz, Poland, Sept. 1977. Part II, Post conference book, Thech. Univer. Lodz, 1979 (pp. 144-147).

10.                I.I. Beilis, Near-cathode processes in arc discharge across alkali film coated electrical contacts, Chapter in book: 10th ICECP, Vol. 1, Budapest, Hungary, Aug. 1980, Budapest (p. 117-127).

11.                I.I. Beilis, V.I. Zalkind, S.S. Schigel, Effect of joule energy dissipation on heat and electrical characteristic electrodes MHD generator. Chapter in book: IPE, Kiev, 1989,

12.                M. Keidar, I. I. Beilis, R. L. Boxman, S. Goldsmith, "Free magnetohydrodynamic flow of the low-density vacuum arc cathodic jet", Chapter in "Progress in Fluid flow research: turbulence and applied MHD" Eds. H. Branover, Y. Unger, Progress in Astronautic and Aeronautic, vol. 182, 1998, (pp. 917-930).

b)       Articles in Journals

Abbreviations

TVT - Teplofizika Vysokikh Temperature, (High. Temp. English transl.)

ZTF - Zhurnal Tekhnicjeskoi Fiziki, (Sov. Phys. Tech. Phys., English tranl.)

PZTF - Pis'ma v Zhurnal Teknicheskoi Fiziki, (Sov. Tech. Phys. Lett., English transl.)

ISOAN STN - Izvestiya Sibirskogo Otdeleniya Academia Nauk USSR Seriya Tekhn. Nauk (English transl.)

DAK - Doklady Akademii Nauk USSR,  (Sov. Phys. Doklady, English transl.)

FKOM - Fizika i Khimiya Obrabotki Materialov (English transl.)

JEF - Journal of Engineering Physics (BSSR Academy of Science), USSR

I T - Izmeritel'naya Tekhnika; ( Meas. Tech., English transl.)

IEEE TPS - IEEE Transaction on Plasma Science

SCT – Surface and Coating Technology

PoP – Physics of Plasmas;

JAP – Journal of Applied Physics;

APL - Applied Physics Letter

JPD - Journal of Phys. D: Applied Physics

JVST- Journal of Vacuum Science and Technology

PSST- Plasma Sources Science and Technology

IEEE TCPT - IEEE Transaction. On Components and Packaging Technologies

RSI - Review of Scientific Instrument

JPP - Journal of Propulsion and Power

CPP-Contributions to Plasma Physics

J. Nucl. Mat.-Journal of Nuclear Materials

AIP- American Institute of Physics

Czech. J. Phys. – Czechoslovak Journal of Physics

LPB-Laser and Particle Beams

PCPP- Plasma Chemistry and Plasma Processing

J. Alloys Compd. - Journal of Alloys and Compounds

MEE- Microelectronic Engineering

REDS - Radiation Effects & Defects in Solids

JMS - Journal Material Science

JSR - Journal of Spacecraft and Rockets

SR - SCIENTIFIC REPORTS

JINST - Journal of Instrumentation

AMT-Advanced Materials Technologies

 

1.              I.I. Beilis,  G.V. Levchenko, V.S. Potokin, V.I. Rakhovsky, N.N. Rykalin, On heating a body by a moving high-powered concentrated heat source. FKOM, No.3, 1967 (pp. 19-22).

2.              I.I. Beilis, N.M. Zykova, Dynamics of the anode spot. ZTF (Sov. Phys. Tech. Phys.), Vol. 38, No. 2, 1968 (pp. 323- 325).

3.              I.I. Beilis, V.I. Rakhovsky, L.G. Tkachov, B.Ya. Smelyansky, Investigation of energy losses in a high-powered electron beam. ZTF (Sov. Phys. Tech. Phys.), Vol. 39, No. 9, 1969 (pp. 1650-1659).

4.              I.I. Beilis, V.I. Rakhovsky, Theory of the cathode mechanism of an arc discharge. High Temp. 1969, Vol. 7 (pp. 568-573); TVT, Vol. 7, No. 4, 1969 (pp. 620-625).

5.              I.I. Beilis, G.A. Lyubimov, V.I. Rakhovsky, Electric field at the electrode surface near the cathode spot of an arc discharge. Sov. Phys. Doklady, Vol.14, 1969 (pp. 897-900); DAK, Vol.188, No.3, 1969 (pp. 552-555).

6.              I.I. Beilis, G.A. Lyubimov, V.I. Rakhovsky, Dynamics of the variation of the fraction of electron current in the region of an arc discharge near the cathode, Sov. Phys. Doklady, Vol.15, 1970 (pp. 254-256); DAK, Vol.191, No.2, 1970 (pp. 307-310).

7.              I.I. Beilis, V.I. Rakhovsky, Effects of nonlinear heat losses at electrode heated by a moving arc discharge, JEF, Vol.19, No.4, 1970 (pp. 678-681).

8.              I.I. Beilis, Analytic approximation for the Nordheim function, High Temp., 1971, Vol.9 (pp. 157-158); TVT, Vol.9, No.1, 1971 (pp. 184-186).

9.              I.I. Beilis, G.A. Lyubimov, V.I. Rakhovsky, Diffusion model of the near cathode region of a high-current arc discharge, Sov. Phys. Doklady, Vol.17, 1972 (pp. 225-228); DAK, Vol. 203, No.1, 1972 (pp. 71-74).

10.           I.I. Beilis, Analysis of the cathode spots in a vacuum arc. Sov. Phys. Tech. Phys., Vol. 19, 1974 (pp. 251-256); ZTF, 1974, Vol. 44 (pp. 400-410).

11.           I.I. Beilis, Emission processes at the cathode of electric arc. Sov. Phys. Tech. Phys., Vol.19, 1974 (pp.257-260); ZTF, Vol.44, No.2, 1974 (pp. 411-418).

12.           I.I. Beilis, N.M. Zykova, V.V. Kubyschkin, Investigation of cathode spot at the electrodes of an impulsive lamp. TVT (High Temper.), Vol. 13, No.4, 1975 (pp. 701-705).

13.           I.I. Beilis, G.A. Lyubimov, Parameters of cathode region of vacuum arc.  High Temp., Vol. 13, 1975 (pp. 1057-1064); TVT, Vol. 13, No.6, 1975 (1137-1145).

14.           I.I. Beilis, G.A. Lyubimov, Theory of the arc spot on a film cathode. Sov. Phys. Tech. Phys., Vol.21, 1976 (pp. 698-703); ZTF, Vol.46, No.6, 1976 (pp. 1231-1239).

15.           I.I. Beilis, G.A. Lyubimov, "Signature" determination of current density at the cathode spot in an arc. Sov. Phys. Tech. Phys., Vol. 21, 1976 (pp. 1280-1282); ZTF, Vol. 46, 1976 (pp. 2181-2184).

16.           I.I. Beilis, V.I. Zalkind, A.S. Tikhotsky, Cathode spot on metallic electrodes in MHDG channels, TVT (High Temp.), Vol. 15, No.1, 1977 (pp. 158-163).

17.           I.I. Beilis, Cathode spots on metallic electrode of a vacuum arc discharge. High Temp., Vol. 15, 1977 (pp. 818-824); TVT, Vol.15, No.5, 1977 (pp. 965-971).

18.           I.I. Beilis, The near-cathode region of contracted discharge at the metal electrode of MHD generator, TVT (High Temp.), Vol. 15, No.6, 1977 (pp. 1269-1275).

19.           I.I. Beilis, On the mechanism of the erosion of metallic electrodes in a channel of MHD generator, TVT (High Temp.), Vol.16, No.4, 1978 (pp. 848-853).

20.           I.I. Beilis, The Gaussian-distribution moving heat source at the semi-infinite plate, FKOM, No.4, 1979 (pp. 32-36).

21.           I.I. Beilis, On the flow of metallic vapor from the cathode region of electrical arc. ISOAN STN, No.3, 1982 (pp. 69-71).

22.           I.I. Beilis, On the role of metal electrode in the near-electrode processes of the arc discharge in MHD-generators conditions, ISOAN STN, No.3, 1982 (pp. 78-85).

23.           I.I. Beilis, On the theory of the erosion processes in the cathode region of an arc discharge, DAK, Vol.262, No.6, 1982 (pp. 1356-1361); Sov. Phys. Doklady, Vol. 27, 1982 (pp. 150).

24.           I.I. Beilis, Diffusion processes in the near-cathode region of an arc discharge in MHD generator, TVT (High Temp.), Vol.20, No.3, 1982 (pp. 604).

25.           I.I. Beilis, On some mechanisms of destruction of copper electrode in MHD generator, TVT, Vol.23, No.3, 1985 (pp. 577-585).

26.           I.I. Beilis, V.I. Rakhovsky, M.P. Zektser, Current density in the cathode spot of a vacuum arc. Gradients of electron temperature and density, DAK, Vol. 282, No.4, 1985 (pp. 854-857); Sov. Phys. Doklady, Vol. 30, 1985 (pp. 476-478).

27.           I.I. Beilis, The anode region of vapour electrode arc discharge, ISOAN STN, Vol.16, No.3, 1985 (pp. 77-82).

28.           I.I. Beilis, Parameters of kinetic layer of arc discharge cathode region, IEEE Trans. Plasma Sci.,  Vol.PS-13, No.5, 1985 (pp. 288-290).

29.           I.I. Beilis, Cathode arc plasma flow in a Knudsen layer, TVT, Vol.24, No.3, 1986 (pp.437-44); High Temp., Vol. 24, 1986 (pp. 319-325).

30.           I.I. Beilis, V.V. Kirillov, The heat conditioning of ceramics element electrodes of MHD generator, TVT, Vol. 24, No. 4, 1986 (pp. 796-801).

31.           I.I. Beilis, The heat conditioning of metal framework combine electrode MHD generator for arc discharge, TVT, Vol. 24, No. 6, 1986 (pp. 1173-1181).

32.           I.I. Beilis, The cathode potential drop of an arc in the vapor of the electrode discharge. DAK, Vol. 298, No. 5, 1988 (pp. 1108-1111); Sov. Phys. Doklady, Vol. 33, 1988 (pp. 125-127).

33.           I.I. Beilis, V.V. Kirillov, Investigation of the heat end electrical characteristic of two-layer ceramics electrodes, TVT, Vol. 26, No. 2, 1988 (pp. 379-386).

34.           I.I. Beilis, Theoretical analysis of the dynamic cathode region in electrical arc. ISOANSTN, Vol.7, No.2, 1988 (pp. 58-64).

35.           I.I. Beilis, Y.Kukharenko, V.I. Rakhovsky, Kinetic calculation of the parameters of near-electrode layer in vacuum arc. IT, No.5, 1988 (pp. 65-67);  Meas. Tech., Vol. 31, 1988 (pp. 517-520).

36.           I.I. Beilis, Model of a steady-state arc spot on a refractory cathode in vacuum. PZTF, 1988, Vol.14, No.12 (pp. 1124-1127); Sov. Tech. Phys. Lett., Vol. 14, 1988 (pp. 494-495).

37.           I.I. Beilis, G.A. Lyubimov, M.P. Zektser, Analysis of the formulation and solution of the problem of the cathode jets of a vacuum arc. ZTF, Vol.58, No.10, 1988 (pp. 1861-1870); Sov. Phys. Tech. Phys., Vol.33, 1988 (pp. 1132-1137).

38.           I.I. Beilis, On the mechanism function of the vacuum arc spot operation on refractory cathodes. TVT, Vol.26, No.6, 1988 (pp. 1224-1226).

39.           I.I. Beilis, V.E. Ostashow, Model for a high-current discharge moving between parallel electrodes, TVT, Vol.27, No.6, 1989 (pp. 1041-1046); High Temperatures. Vol. 27, No. 6, 1989 (pp. 817-821).

40.           I.I. Beilis, The nature of an arc discharges with a mercury cathode in vacuum. PZTF, Vol. 16, No. 10, 1990 (pp. 71-74); Sov. Tech. Phys. Lett., Vol. 16, N5, 1990 (pp. 390-391).

41.           I.I. Beilis, V.I. Zalkind, V.V. Kirillov, Two dimensional analysis of Joule dissipation in combined MHD electrodes, TVT, Vol. 28, No. 6, 1990 (pp. 1220-1225); High Temp., Vol. 28, No. 6 (pp.938-943).

42.           I.I. Beilis, Thermal and electrical characteristic of electrode-plasma system in an channel MHD generator, TVT, Vol. 29, No.2, 1991 (pp. 356-357); High Temp., Vol. 29, No. 2, 1991 (pp. 281-284)

43.           I.I. Beilis, Model of a vacuum arc spot on a mercury arc cathode, TVT, Vol.29, No.1, 1991 (pp. 30-34); High Temp., Vol. 29, No. 1, 1991 (pp. 30-34.)

44.           I.I. Beilis, M.P. Zektser, Calculation of the parameters of the cathode stream an arc discharge, High Temp., Vol.29, No.4, 1991 (pp.501-504).

45.           I.I. Beilis, A.Yu. Sevalnicov, The column of electrical arc at atmospheric pressure, TVT, Vol.29, No.5, 1991 (pp. 856-863).

46.           N.V. Volkov, I.I. Beilis, Extended negative glow plasma in short glow discharge, High Temp., Vol.30, N4, 1992 (pp. 542-549).

47.            N. Parkansky, I. Beilis, R. Boxman, S. Goldsmith, "Anode erosion during pulsed arcing", IEEE Trans. Plasma Sci., Vol.21, N5, 1993 (pp.458-462).

48.           R.L. Boxman, S. Goldsmith, A. Ben-Shalom, L.Kaplan, D. Arbilly, E. Gidalevich, V.N Zhitomirsky, A.Ishaya, M. Keidar, I. Beilis, IEEE Trans. Plasma Sci., Vol.23, N6, 1995 (pp. 939-944).

49.           M. Keidar, I. Beilis, R.L. Boxman and Goldsmith, "Non-stationary macroparticle charging in an arc plasma jet", IEEE Trans. Plasma Sci., Vol.23, N6, 1995 (pp. 902-908).

50.           H. Rosenthall, I. Beilis, S. Goldsmith, R.L.Boxman, "Heat fluxes during the development of hot anode vacuum arc", J.Phys. D: Appl. Phys, Vol.28, N1, 1995 (pp. 353-363).

51.           M. Keidar, I. Beilis, R.L. Boxman and Goldsmith, "Transport of macroparticles in magnetized plasma ducts", IEEE Trans. Plasma Sci., Vol.24, N1, 1996 (pp. 226-234).

52.           H. Rosenthall, I. Beilis, S. Goldsmith, R.L.Boxman, "Spectroscopic investigation of the development of hot anode vacuum arc",  J.Phys. D: Appl. Phys, Vol.29, N6, 1996 (pp. 1245-1259).

53.           M. Keidar, I. Beilis, R.L. Boxman and Goldsmith, "2-D expansion of the low density interelectrode vacuum arc plasma in an axial magnetic field", J.Phys. D: Appl. Phys, Vol.29, N7, 1996 (pp. 1973-1983).

54.           I. I. Beilis, "Current continuity and instability of the mercury vacuum arc cathode spot", IEEE Trans. Plasma Sci.,  Vol.24, N4, 1996 (pp. 1259-1271).

55.           M. Keidar, I. Beilis, R.L. Boxman and Goldsmith, "Macroparticle interaction with a substrate in cathodic vacuum arc deposition",  Surface and Coatings Technology, Vol., 86/87, 1996 (pp.415-420).

56.           R.L. Boxman, V.N Zhitomirsky, E. Gidalevich, I. Beilis, M. Keidar and Goldsmith, "Resent progress in filtered vacuum arc deposition",  Surface and Coatings Technology, Vol. 86/87, 1996 (pp.243-253).

57.            I. Beilis, B.E. Djakov, B. Juttner and Pursch "Structure and dynamics of high-current arc cathode spots in vacuum", J.Phys. D: Appl. Phys, Vol.30, N1, 1997 (pp. 119-130).

58.            I. I. Beilis, M. Keidar, R. L. Boxman, and S. Goldsmith. Non-equilibrium macroparticle charging in low-density plasmas. IEEE Trans. Plasma Sci., 25, No2, 1997  (pp.346-352).

59.            M. Keidar, I. I. Beilis, R. L. Boxman, S. Goldsmith. Voltage of the vacuum arc with a ring anode in an axial magnetic field. IEEE Trans. Plasma Sci., 25, No4, 1997 (pp. 580-585).

60.            I. I. Beilis, M. Keidar and S. Goldsmith. Plasma-wall transition: The influence of the electron to ion current ratio on the magnetic presheath structure, Phys. Plasmas, Vol.4, No,10, 1997 (pp.3461-3468).

61.           M. Keidar, I. I. Beilis, R. Aharonov, D. Arbilly, R. L. Boxman and S. Goldsmith. Macroparticle distribution in a quater-torus plasma duct of a filtered vacuum arc deposition system, J. Phys. D: Appl. Phys, Vol.30, N 21, 1997 (pp. 2972-2978).

62.           I. I. Beilis, M. Keidar, R. L. Boxman, and S. Goldsmith. Theoretical study of plasma expansion in a magnetic field in a disk anode vacuum arc, J. Appl. Phys., Vol.83, No.2, 1998 (pp.709-717).

63.           I. I. Beilis, M. Keidar, “Sheath and presheath structure in the plasma wall-transition layer in an oblique magnetic field”, Phys. Plasmas, Vol.5, No,5, 1998 (pp.1545-1553).

64.           N. Parkansky, I. Beilis, L. Rapoport, R L.. Boxman, S. Goldsmith and Yu. Rosenberg, "Electrode erosion and coating properties in pulsed air arc deposition of WC-based alloys", Surface and Coatings Technology, Vol. 105, N1/2, 1998 (pp.130-134).

65.           I. I. Beilis, A. Fruchtman and Y. Maron, “A mechanism for ion acceleration near the anode of a magnetically insulated ion diode”, IEEE Trans. Plasma Sci., Vol.26, N3, 1998 (pp.995-999).

66.           M. Keidar and I.I. Beilis “Plasma-wall sheath in a positive biased duct of the vacuum arc magnetic macroparticle filter”, Appl. Phys Lett. 73, 1998,  (p.306-308)

67.            I. I. Beilis, M. Keidar, R.L. Boxman, S. Goldsmith, Effect of  macroparticle separation in positively biased ducts in the filtered vacuum arc deposition systems, Surface and Coatings Technology, 108-109, 1998, p.148-153

68.           N. Parkansky, I.I. Beilis, R L.. Boxman, S. Goldsmith and Yu.  Rosenberg, "Anode mass loss during pulsed air arc deposition", Surface and Coatings Technology, 108-109, 1998, p. 253-256

69.           M. Keidar, I.I. Beilis, I. G. Brown, “Multiply charged ion transport in free boundary vacuum arc plasma jet”, J. Appl. Phys. 84, 1998,  (p.1656-1660)

70.           I. I. Beilis, R. L. Boxman, and S. Goldsmith. “Steady-state model of a Refractory hot anode Vacuum Arc”, J. Phys. D: Appl. Phys., Vol. 32, No 1, 1999 (pp.153-158).

71.           I. I. Beilis, M. Keidar, R.L. Boxman and S. Goldsmith, ”Macroparticle separation and plasma collimation in positively biased ducts in filtered vacuum arc deposition systems”, J. Appl. Phys., Vol. 85, 3, 1999 (p.1358-1365).

72.           I. I. Beilis, M. Keidar, R.L. Boxman, S. Goldsmith, J.  Heberlein and E. Pfender, “Radial plasma flow in a hot anode vacuum arc”, J. Appl. Phys., Vol. 86, 1, 1999 (p.114 -119).

73.           M. Keidar, I. I. Beilis, “Hydrodynamic model of vacuum arc plasma flow in a positively biased toroidal macroparticle filter ” Plasma Sources Science and Technology, vol 8, N3, 1999, (pp. 376-383).

74.           M. Keidar, I. I. Beilis, A. Anders, I. G. Brown, “Free-boundary vacuum arc plasma jet expansion in a curved magnetic field”, IEEE Trans. Plasma Sci., Vol.27, N2, 1999 (pp.613-619).

75.           M. Keidar, I. I. Beilis, “Macroparticle Reflection from a Biased Substrate in a Vacuum Arc Deposition” IEEE Trans. Plasma Sci., Vol.27, N3, 1999, (pp.810-81)

76.           I. I. Beilis, “Application of Vacuum Arc Cathode Spot Model to Graphite Cathode”, IEEE Trans. Plasma Sci., Vol.27, N4, 1999, (pp.821-826)

77.           I. I. Beilis, M. Keidar, R. L. Boxman, and S. Goldsmith, “Plasma Expansion and Current Flow in a Vacuum Arc with a Small Anode”, IEEE Trans. Plasma Sci., Vol.27, N4, 1999, (pp.872-876)

78.           I. I. Beilis, R. L. Boxman, S. Goldsmith and V.L. Paperny. “Ion acceleration in radially expanding plasma of the hot refractory anode arc”, Appl. Phys. Lett. 75, No18, 1999,  (p.2734-2736)

79.           M. Keidar, R. Aharonov and I. I. Beilis, “Influence of an electrical field on the macroparticle size distribution in a vacuum arc”, J. Vac. Sci. Technol., A17 (5) Sep/Oct 1999 pp. 3067-3073.

80.           M. Keidar, I. G. Brown and I. I. Beilis, “Axial ion charge state distribution in the arc plasma jet”, Review of Scientific Instrument, Vol. 71, No 2, 2000, pp.698-700.

81.            M. Keidar, I. D. Boyd and I. I. Beilis,  “Electrical Discharge in the Teflon Cavity of a Coaxial Pulsed Plasma Thruster”, IEEE Trans. Plasma Sci., Vol.28, N2, 2000, (pp.376-385)

82.           I. I. Beilis, “Anode Spot Vacuum Arc Model: Graphite Anode”, IEEE Transaction. on Components and Packaging Technologies, Vol.23, No2, 2000, (pp.334-340).

83.            I. I. Beilis, M. Keidar, R. L. Boxman, and S. Goldsmith, “Interelectrode plasma parameters and plasma deposition in a hot refractory anode vacuum arc”, Phys. Plasmas, Vol.7, No7, 2000, (pp.3068-3076).

84.            I. I. Beilis, R. L. Boxman, S. Goldsmith and V.L. Paperny. “Radially expanding plasma parameters in a hot refractory anode arc”, J. Appl. Phys., Vol. 88, N11, 6224-6231, 2000.

85.           I. I. Beilis, R. L. Boxman and S. Goldsmith, “The hot refractory anode vacuum arc: a new plasma source for metallic film deposition ”, Surface and Coatings Technology, 133-134, issues 1-3, 2000, p. 91-95.

86.           M. Keidar, I. D. Boyd and I. I. Beilis, “Model of Particulate interaction with plasma in a teflon pulsed plasma thruster", Journal of Propulsion and Power, Vol. 17, No. 1, 2001, pp. 125-131

87.           M. Keidar, Jing Fan, I. D. Boyd and I. I. Beilis, “Vaporization of heated materials into discharge plasmas”, J. Appl. Phys., Vol. 89, N6, 2001, 3095-3098.

88.           M. Keidar, I. D. Boyd and I. I. Beilis, “On the model of Teflon ablation in an ablation-controlled discharge” J. Phys. D: Appl. Phys., Vol. 34, No , 2001 (pp.1675-1677).

89.           I. I. Beilis, “State of the theory of vacuum arcs”, IEEE Trans. Plasma Sci., Vol.29, N5, Part 1, 2001, (pp.657-670)

90.           I. I. Beilis, R. L. Boxman and S. Goldsmith, “A hot refractory anode vacuum arc: nonstationary plasma model”, IEEE Trans. Plasma Sci., Vol.29, N5, Part 1, 2001, (pp.690-694)

91.            I. I. Beilis,  “A mechanism for nanosecond cathode spot operation in vacuum arcs”, IEEE Trans. Plasma Sci., Vol.29, N5, Part 2, 2001, (pp.844-847)

92.           M. Keidar, I.D. Boyd and I.I. Beilis, “Plasma flow and plasma-wall transition in Hall thruster channel”, Phys. Plasmas, Vol.8, No12, 2001, (pp.5315-5322).

93.           I. I. Beilis, R. L. Boxman, and S. Goldsmith, “Interelectrode plasma evolution in a hot refractory anode vacuum arc: Theory and comparison with experiment”, Phys. Plasmas, Vol.9, No7, 2002, (pp.3159-3170).

94.           .I. I. Beilis. “Mechanism for cathode spot grouping in vacuum arcs”, Appl. Phys. Lett. 83, No21, 2002, (p.3936-3938)

95.           .I. I. Beilis. “Vacuum Arc Cathode Spot Grouping and Motion in Magnetic Fields”, IEEE Trans. Plasma Sci., Vol.30, N6, 2002, (p.2124-2132)

96.           I.G. Levchenko, A.U. Voloshko, M. Keidar, and I.I. Beilis, “Unipolar arc behavior in high frequency fields”, IEEE Trans. Plasma Sci., Vol.31, N1, 2003, (p.137-141)

97.           M. Keidar, I.D. Boyd and I.I. Beilis, " A model of an Electrothermal Pulsed Plasma Thruster", Journal of Propulsion and Power, Vol. 19, No. 3, 2003, (pp. 424-430)

98.           ,I. I. Beilis, “The Vacuum Arc Cathode Spot and Plasma Jet: Physical Model and Mathematical description”, Contributions to Plasma Physics, Vol. 43. N.3-4, 2003, (pp.224-236)

99.           I.I. Beilis, A. Nemirovsky, S. Goldsmith, R.L. Boxman, “Two-Dimensional Thermal Model of a Refractory Anode in a Vacuum Arc”, IEEE Trans. Plasma Sci., Vol.31, N5, Part 1, 2003, (pp.958-962)

100.       I.I. Beilis, A Shashurin, D Arbilly, S. Goldsmith and R. L. Boxman, “Copper film deposition by a hot refractory anode vacuum arc”, Surface and Coatings Technology, 177-178, issues 1-3, 2004, (p. 233-237)

101.       I.I. Beilis. “A mechanism for small electron current fraction in a vacuum arc cathode spot on a refractory cathode”, Appl. Phys. Lett. 84, N8, 2004, (p.1269-1271).

102.       M. Keidar, I.D. Boyd and I.I. Beilis, “Modeling of the High-Power Thruster with Anode Layer”, Phys. Plasmas, Vol.11, N4, 2004, (pp.1715-1722).

103.       I.G. Levchenko, M. Romanov, M. Keidar, and I.I. Beilis, “Stable plasma configurations in a cylindrical magnetron discharge”, Appl. Phys. Lett. 85, N12, 2004, (p.2202-2204).

104.       V.I. Oreshkin, R. B. Baksht, N.A. Ratakhin, A.V. Shishlov. K.V. Khishchenko, P.R. Levashov, I. I. Beilis, “Wire explosion in vacuum. Simulation of a striation appearance”, Phys. Plasmas, Vol.11, No10, 2004, (pp.4771-4776).

105.       I.I. Beilis. “Nature of High-Energy Ions in the Cathode Plasma Jet of a Vacuum Arc with High Rate of Current Rise”, Appl. Phys. Lett. 85, No14, 2004, (p.2739-2740).

106.       I.I. Beilis, A Shashurin, A. Nemirovsky, S. Goldsmith and R.L. Boxman, “Anode temperature distribution and coatings characteristics in a hot refractory anode vacuum arc with an asymmetric anode”, Surface and Coatings Technology, 188-189, 2004, (p.228-233).

107.       M. Keidar, I. D. Boyd and I. I. Beilis, “Ionization and ablation phenomena in an ablative plasma accelerator” J. Appl. Phys., Vol. 96, No10, 2004 (pp.5420-5428).

108.       I.I. Beilis, A Shashurin, A. Nemirovsky, R.L. Boxman, and S. Goldsmith “Imaging of the Anode Plasma Plume Development in a Hot Refractory Anode Vacuum Arc”, IEEE Trans. Plasma Sci., Vol.33, N2, 2005, (p.408-409).

109.        M. Laux, W. Schneider, B. Juttner, S, Linding, M. Mayer, M. Balden, I.I. Beilis, B. Djakov, “Modification of tungsten layers by arcing”, J. of Nuclear Materials, vol.337-339, p.1019-1023, 2005.

110.        M. Keidar, J. Schein, K. Wilson, A. Gerhan, M. Au, B. Tang, L. Idzkowski, M. Krishnan and I. I. Beilis, “Magnetically enhanced vacuum arc thruster”, Plasma Sources Science and Technology, vol 14, N4, 2005, (pp.661-669).

111.       M. Laux, W. Schneider, B. Juttner, S, Linding, M. Mayer, M. Balden, I.I. Beilis B. Djakov, ” Modification of Tungsten Layers by Arcing”, PSI16, Germany, P3-28, 2004.

112.       M. Laux, W. Schneider, B. Jüttner, M. Balden, S. Lindig, I.I. Beilis and B.E. Djakov, “Ignition and Burning of Vacuum Arcs on Tungsten Layers ” IEEE Trans. Plasma Sci., Vol.33, N5, Part 1, 2005, (pp.1470-1475)

113.       M. Keidar and I.I. Beilis, “Transition From Plasma to Space-Charge Sheath Near the Electrode in Electrical Discharges” IEEE Trans. Plasma Sci., Vol.33, N5, Part 1, 2005, (pp.1481-1486)

114.        I.I. Beilis, “Ion Acceleration in Vacuum Arc Cathode Plasma Jets With Large Rates of Current Rise”, IEEE Trans. Plasma Sci., Vol.33, N5, Part 1, 2005, (pp.1537-1541)

115.        R.L. Boxman I.I. Beilis, E. Gidalevich, and V.N. Zhitomirsky, “Magnetic Control in Vacuum Arc Deposition: A Review ” IEEE Trans. Plasma Sci., Vol.33, N5, Part 1I, 2005, (pp.1618-1624)

116.        I.I. Beilis, A Shashurin, A. Nemirovsky, S. Goldsmith, and R.L. Boxman, “Measurements of the Anode Temperature in a Vacuum Arc With an Asymmetric Hot Refractory Mo Anode”, IEEE Trans. Plasma Sci., Vol.33, N5, Part 1I, 2005, (pp.1641-1647)

117.        I.I. Beilis, A Shashurin, R.L. Boxman, and S. Goldsmith, “Influence of background gas pressure on copper film deposition and ion current in a hot refractory anode vacuum arc” Surface and Coatings Technology, 200, 2005, (p.1395-1400).

118.        V.I. Oreshkin, R.B. Baksht, N.A. Ratakhin, A.Yu. Labetsky, A.G. Rousskikh, A.V. Shishlov, P.R. Levashov, K.V. Khishchenko, I.V. Glazyrin, I. Beilis, "The Thermal Instabilities on Electrical Explosion of Metal Wires", AIP Conference Proceedings -- January 5, Vol 808, Issue 1, pp. 103-106, 2006

119.        I.I. Beilis, A Shashurin, R.L. Boxman, and S. Goldsmith, “Total ion current fraction in a hot refractory anode vacuum arc”, Appl. Phys. Lett. 88, 071501, 2006.

120.        M. Keidar and I.I. Beilis, “Electron Transport Phenomena in Plasma Devices With EXB Drift” IEEE Trans. Plasma Sci., Vol.34, N3, Part 1I, 2006, (pp. 804- 814)

121.        I.I. Beilis, “Kinetics of Plasma Particles and Electron Transport in the Current-Carrying Plasma Adjacent to an Evaporating and Electron Emitting Wall” IEEE Trans. Plasma Sci., Vol.34, N3, Part 1I, 2006, (pp. 855- 866)

122.        I.I. Beilis, “Laser Produced Plasma Interaction with a Matter”, Czech. J. Phys., Vol.56, Suppl. B, 2006, (pp. 436-442)

123.        I.I. Beilis, “Mechanism of laser plasma production and of plasma interaction with a target”, Appl. Phys. Lett. 89, 091503, 2006.

124.       I.I. Beilis, “Mechanism of laser plasma production and of plasma interaction with a target”, Virtual Journal of Ultrafast Science, September 2006 issue, selected from APL, 89, 091503, 2006.

125.       M. Keidar and I.I. Beilis, “Nonequilibrium thermal boundary layer in a capillary discharge with an ablative wall”, Phys. Plasmas, Vol.13, No11, 2006, pp.14503-1-3

126.        A Shashurin, I.I. Beilis, Y. Sivan, S. Goldsmith and R.L. Boxman, “Copper film deposition rates by a hot refractory anode vacuum arc and magnetically filtered vacuum arc” Surface and Coatings Technology, 201, N7, 2006, (p.4145-4151).

127.        I.I. Beilis, “Laser plasma generation and plasma interaction with ablative target”, Laser and Particle Beams, Volume 25, Issue 01, 2007, pp 53-63.

128.        I.I. Beilis, Transient Cathode Spot Operation at a Microprotrusion in a Vacuum Arc IEEE Trans. Plasma Sci., Vol.35, N4, Part 2, 2007, (pp. 966- 972).

129.        I.I. Beilis, A. Shashurin, R. L Boxman, Measurement of Ion Flux as a Function of Background Gas Pressure in a Hot Refractory Anode Vacuum Arc IEEE Trans. Plasma Sci., Vol.35, N4, Part 2, 2007, (pp. 973- 979).

130.        I.I. Beilis, A. Snaiderman, A Shashurin, R.L. Boxman, S. Goldsmith, “Copper film deposition and anode temperature measurements in a vacuum arc with tungsten anode, ” Surface and Coatings Technology, 202, Issues 4-7, 2007, (p.925-930).

131.        N. Parkansky, L. Glikman, I.I. Beilis, B. Alterkop, R.L.Boxman, D. Gindin,”W-C Electrode Erosion in a Pulsed Arc Submerged in Liquid”, Plasma Chemistry and Plasma Processing, v27, N6, p.789-797, 2007.

132.        I. I. Beilis, R. B. Baksht, V. I. Oreshkin, A. G. Russkikh, S. A. Chaikovskii, A. Yu. Labetskii, N. A. Ratakhin, and A. V. Shishlov, "Discharge phenomena associated with a preheated wire explosion in vacuum: Theory and comparison with experiment”, Phys. Plasmas, Vol.15, No1, 2008, (pp. 013501-1--013501-13)

133.        A Shashurin, I.I. Beilis, and R.L. Boxman, “Angular distribution of ion current in a vacuum arc with a refractory anode” Plasma Sources Science and Technology, Technol. 17 (2008) 015016 (11pp).

134.        N. Parkansky, G. Frenkel, B. Alterkop, I. Beilis, R.L. Boxman, Z. Barkay, Yu. Rosenberg, "Ni–C powder synthesis by a submerged pulsed arc in breakdown mode", J. Alloys Compd. (2007 online), doi:10.1016/j.jallcom.2007.10.021; published V 464, Issues 1-2, 22 Sept 2008, p.p. 483-487

135.        I.I. Beilis, “Microplasma generation in a microscale short vacuum arc”, Appl. Phys. Lett. 92, 121501, 2008.

136.        I.I. Beilis, D. Grach, A Shashurin, R. L Boxman, Filling Trenches on a SiO2 Substrate with Cu Using a Hot Refractory Anode Vacuum Arc" Microelectronic Engineering, 85 1713-1716, 2008

137.        N. Parkansky, L. Glikman, I.I. Beilis, B. Alterkop, R.L.Boxman, Yu. Rosenberg, Z. Barkay, W-C Synthesis in a Pulsed Arc Submerged in Liquid”, Plasma Chemistry and Plasma Processing, v28, N6, p.265-375, 2008.

138.        A.G. Russkikh, D. Pil’tikhina, R. B. Baksht, I. I. Beilis, S. A. Chaikovskii, "Effect of electrode polarity on wire explosion in vacuum" J. Appl. Phys., Vol. 104, N1, 2008 (pp. 013306-1-013306-6).

139.        I.I. Beilis, "Metallic plasma production by laser ablation" Radiation Effects & Defects in Solids, Apr 2008, Vol. 163 Issue 4-6, p317-324.

140.        I.I. Beilis, A Shashurin, R.L Boxman, “Anode Plasma Plume Development in a Vacuum Arc with a “Black-Body” Anode-Cathode Assembly", IEEE Trans. Plasma Sci., Vol.36, N4, Part 1, 2008, (pp.1030- 1031).

141.        A Shashurin, M. Keidar, I.I. Beilis, "Voltage-current characteristics of an anodic arc producing carbon nanotubes", J. Appl. Phys., Vol. 104, N6, 2008 (pp. 063311-1- 063311-5).

142.        A.G. Russkikh, V.I. Oreshkin, S.A. Chaikovskii, N.A. Labetskaya, A.V. Shishlov, I. I. Beilis, R. B. Baksht, "Study of the strata formation during the explosion of a wire in vacuum", Phys. Plasmas, Vol.15, No10, 2008, (pp. 102706-7).

143.        I.I. Beilis, A. Snaiderman, R.L. Boxman, “Chromium and titanium film deposition using a hot refractory anode vacuum arc plasma source”, Surface and Coatings Technology, 203, Issues 5-7, 2008, (p.501-504).

144.        I.I. Beilis, “Modeling of a Microscale Short Vacuum Arc for a Space Propulsion Thruster", IEEE Trans. Plasma Sci., Vol.36, N5, Part 1, 2008, (pp.2163-2166).

145.        I.I. Beilis, “Wall interactions with plasma generated by vacuum arcs and targets irradiated by intense laser beams” Plasma Sources Science and Technology, Technol. 18 (2009) 014015 (16pp).

146.        I.I. Beilis, A Shashurin, R.B Baksht, V. Oreshkin, "Density and temperature distributions in the plasma expanding from an exploded wire in vacuum", J. Appl. Phys., Vol. 105, N3, 2009 (pp. 033301-1- 033301-5).

147.        M. Keidar, I.I. Beilis, "Sheath and boundary conditions for plasma simulations of a Hall thruster discharge with magnetic lenses", Appl. Phys. Lett. 94, 191501 2009.

148.        H. Marks, I.I. Beilis, R.L Boxman, “Measurement of the Vacuum Arc Plasma Force”, IEEE Trans. Plasma Sci., Vol.37, N7, Part 2, 2009, (pp.1332- 1337).

149.        A Shashurin, I.I. Beilis, and R.L. Boxman, “Experimental study of plasma parameters in a vacuum arc with a hot refractory anode", Plasma Sources Science and Technology, Technol. 18 (2009) 045004 (13pp).

150.        I.I. Beilis and R.L. Boxman, “Metallic film deposition using a vacuum arc plasma source with a refractory anode", Surface and Coatings Technology, 204, N6-7, 2009, (p.865-871).

151.        M. Keidar, I.I. Beilis, "Modeling of atmospheric-pressure anodic carbon arc producing carbon nanotubes", J. Appl. Phys., Vol. 106, N10, 2009 (pp. 103304-1-103304-6)

152.        M. Keidar, I.I. Beilis, "Modeling of atmospheric-pressure anodic carbon arc producing carbon nanotubes", Virtual Journal of Nanoscale Science & Technology -- December 7, 2009 Volume 20, Issue 2: selected from JAP, 106, N10, 2009, p.103304.

153.        A Shashurin, I.I. Beilis, and R.L. Boxman, “Heat flux to an asymmetric anode in a hot refractory anode vacuum
arc", Plasma Sources Science and Technology, Technol. 19 (2010) 015002 (9pp).

154.        M. Keidar, A Shashurin, O. Volotskova, E. Raitses, I.I. Beilis, “Mechanism of carbon nanostructure synthesis in arc plasma”, Phys. Plasmas, Vol.17, No5, (pp. 057101-1-- 057101-9) 2010

155.        A.G. Russkikh, V.I. Oreshkin, A. Zhigalin, I. I. Beilis, R. B. Baksht, " Expansion of the plasma corona from a wire exploded in vacuum", Phys. Plasmas, Vol.17, No3, (pp. 033505-7), 2010.

156.        I.I. Beilis, Y. Koulik, R.L. Boxman and D. Arbilly, “Thin film deposition using a plasma source with a refractory anode vacuum arc”, J Mater Sci, v45 N23, p.6325, 2010

157.        I.I. Beilis, "The nature of high voltage initiation of an electrical arc in a vacuum", Appl. Phys. Lett. 97, 121501 2010.

158.        I.I. Beilis, Y. Koulik, R.L. Boxman and D. Arbilly, “Al and Zn film deposition using a vacuum arc plasma source with a refractory anode", Surface and Coatings Technology, 205, N , 2010, p. 2369–2374.

159.       M. Keidar, I.I. Beilis, "On a Model of Nanoparticle Collection by an Electrical Probe", IEEE Trans. Plasma Sci., Vol.38, N11, 2010, (pp. 3249- 3251).

160.       N. Parkansky, I.I. Beilis, D. Gindin, B. Alterkop, R.L. Boxman, A. Moshkovich, V. Perfilyev, L. Rapoport, Yu. Rosenberg, "Steel Surface Modification by Pulsed Air Arc Treatment", “Surface and Coatings Technology” 205 N2 287-293 2010.

161.       T. Zhuang, A. Shashurin, M. Keidar, I.I. Beilis, “Circular periodic motion of plasma produced by a small-scale vacuum arc", Plasma Sources Science and Technology, Technol. 20 015009 (4pp) 2011.

162.       I.I. Beilis, "Special Issue on Electrical Discharges in Vacuum", IEEE Trans. Plasma Sci., Vol.39, N6, Part 1, 2011, (pp.1030- 1270-1271).

163.       I.I. Beilis, " Continuous Transient Cathode Spot Operation on a Microprotrusion: Transient Cathode Potential Drop", IEEE Trans. Plasma Sci., Vol.39, N6, Part 1, 2011, (pp. 1277-1283).

164.       I.I. Beilis, Y. Koulik, R.L. Boxman, " Temperature Distribution Dependence on Refractory Anode Thickness in a Vacuum Arc: Experiment", IEEE Trans. Plasma Sci., Vol.39, N6, Part 1, 2011, (pp. 1303-1306).

165.       I.I. Beilis, Y. Koulik, R.L. Boxman, " Temperature Distribution Dependence on Refractory Anode Thickness in a Vacuum Arc: Theory", IEEE Trans. Plasma Sci., Vol.39, N6, Part 1, 2011, (pp. 1307-1310).

166.       A Shashurin, J. Li, T. Zhuang, M. Keidar, I.I. Beilis, “Application of electrostatic Langmuir probe to atmospheric arc plasmas producing nanostructures”, Phys. Plasmas, Vol.18, No7, (pp. 073505 -1-- 073505 -7) 2011.

167.       I.I. Beilis, Y. Koulik, R.L. Boxman, "Evolution of a Plasma Plume From a Shower Anode in a Vacuum Arc With a Black-Body Electrode Configuration", IEEE Trans. Plasma Sci., Vol.39, N11, Part 1, 2011, (pp. 2838-2839).

168.       N. Parkansky, I.I. Beilis, B. Alterkop, R.L. Boxman, Yu. Rosenberg, "Magnetic field influence on pulsed air arc anode mass loss", J. Phys. D: Appl. Phys. 45 (2012) 045401 (6pp).

169.        I.I. Beilis, Y. Koulik, R.L. Boxman, "Ion current density measurements in a copper vacuum arc with different refractory anode thicknesses", J. Appl. Phys, Vol.111, N, Part 1, 2012, (pp.043302-1 - 043302-6).

170.       T. Zhuang, A Shashurin, I.I. Beilis, M. Keidar, “Ion velocities in a micro-cathode arc thruster”, Phys. Plasmas, Vol.19, No6, (pp. 063501-1-- 063501-5) 2012.

171.       I.I. Beilis, “Modeling of the plasma produced by moderate energy laser beam interaction with metallic target: Physics of the phenomena”, Laser and Particle Beams, Volume 30, N3, 2012, 341-356.

172.       I.I. Beilis, Y. Koulik, R.L. Boxman, “Sn thin film deposition using a vacuum arc plasma source with a refractory anode", Surface and Coatings Technology, 232, N 15 October, 2013, p. 936–940.

173.       I.I. Beilis, "Cathode Spot Development on a Bulk Cathode in a Vacuum Arc", IEEE Trans. Plasma Sci., Vol.41, N8, Part II, 2013, (pp. 1979-1986).

174.       I.I. Beilis, Y. Koulik, R.L. Boxman, "Cu Ion Current Measurements in a Vacuum Arc with a Black Body Electrode Configuration", IEEE Trans. Plasma Sci., Vol.41, N8, Part II, 2013, (pp. 1987-1991).

175.       I.I. Beilis, Y. Koulik, R.L. Boxman, "Effective Cathode Voltage in a Vacuum Arc with a Black Body Electrode Configuration", IEEE Trans. Plasma Sci., Vol.41, N8, Part II, 2013, (pp. 1992-1995).

176.       A. Shashurin, T. Zhuang, G. Teel, M. Keidar, M. Kundrapu, J. Loverich, I. I. Beilis, and Y. Raitses, "Laboratory Modeling of the Plasma Layer at Hypersonic Flight", Journal of Spacecraft and Rockets, Vol. 51, No. 3 (2014) pp. 838-846.

177.       A. Shashurin, T. Zhuang, M. Kundrapu, J. Loverich, I.I. Beilis, and M. Keidar, " Modeling of a Plasma Layer in Vicinity of a Hypersonic Vehicle Using Cathodic Arc ", IEEE Trans. Plasma Sci., Vol.42, N10, Part I, 2014, (pp. 2660-2661).

178.       I.I. Beilis, Y. Koulik, R.L. Boxman, “Cu film deposition using a vacuum arc with a black-body electrode assembly", Surface and Coatings Technology, 258, 15 November, 2014, p. 908–912.

179.       I.I. Beilis, "Physics of Cathode Phenomena in a Vacuum Arc with respect to a Plasma Thruster Application", IEEE Trans. Plasma Sci., Vol.43, N1, Part I, 2015, (pp. 165-172).

180.       A. Shashurin, D, Scott, T. Zhuang, J. Canady, I.I. Beilis, and M. Keidar, "Electric discharge during electrosurgery", SCIENTIFIC REPORTS,| v4: 9946, p.1-7, 2015.

181.       N. Parkansky, V. Yakubov. I.I. Beilis, B., R.L. Boxman, O. Berkh,” Electrode erosion during submerged arc treatment of methylene blue water solution, J. Phys. D: Appl. Phys. 48, 225202, 2015.

182.       I.I. Beilis, B. Sagi, V. Zhitomirsky, and R.L. Boxman, Cathode Spot motion in a vacuum arc with a long roof-shaped cathode under magnetic field, J. Appl. Phys., Vol. 117, N23, 233303 (2015).

183.       I.I. Beilis, Y. Koulik, Y. Yankelevich, D. Arbilly, and R.L. Boxman " Thin-Film Deposition With Refractory Materials Using a Vacuum Arc ", IEEE Trans. Plasma Sci., Vol.43, N8, Part I, 2015, (pp. 2323-2328).

184.       I.I. Beilis, Mechanism of cathode spot splitting in vacuum arcs in an oblique magnetic field, Phys. Plasmas, 22, N10, 103510, 2015.

185.       M Keidar, A Shashurin S Delaire, X Fang and I I Beilis, Inverse heat flux in double layer thermal metamaterial, Journal of Physics D: Applied Physics, 48 485104 (4pp) 2015.

186.       I.I. Beilis, Metallic targets ablation by laser plasma production in a vacuum, Journal of Instrumentation (JINST) 11 N3, 03056 2016.

187.       I. Levchenko, I.I. Beilis, M Keidar, Nanoscaled Metamaterial as an Advanced Heat Pump and Cooling Media, Adv. Mater. Technol., 1 1600008 (10p), 2016.

188.       I.I Beilis, Vacuum arc cathode spot motion in oblique magnetic fields: An interpretation of the Robson experiment, Phys. Plasmas, 23 N9, 093501, 2016.

189.       Y. Silver, I. Nachshon, I.I. Beilis, G. Leibovitch, and G. Shafir, Velocity and ion charge in a copper plasma plume ejected from 5 microsecond vacuum arcs, J. Appl. Phys., Vol. 121, 053301, 2017.

 

C.      PROCEEDINGS OF CONFERENCES

Abbreviations:

ISDEIV - International Symposium on Discharges and Electrical Insulation in Vacuum

ICPIG - International Conference on Phenomena in Ionized Gases

USHCE - Union Symposium High Current Electronics USSR

UCGLTP - Union Conference on Generator Low Temperature Plasma, USSR

WEP - Workshop on Electrode Phenomena

ICEC - International Conference on Electrical Contacts

IC MHD EPG - International Conference on MHD Electrical Power Generation

ISSAP - International Symposium on Switching Arc Phenomena

SEAM - Symposium Engineering Aspects of Magneto hydrodynamics

UCPA - Union Conference on Plasma Accelerator, USSR

UCEE - Union Conference on Emission Electronics, USSR

UCECMC - Union Conference on Electrical Contacts and Material Contacts

UCLTP - Union Conference on Low Temperature Plasma, USSR

IPS - Israel Physical Society

ESCAMPIG - Europhysics Sectional Conf. on Atomic and Molecular Physics of Ionized Gases

ICMCTF, - San-Diego, California - Int. Conf. Metallurgical Coatings and Thin Films

BEAMS – International Conference on High-Power Particle Beams

ICECT - Inter. Conf. on Electrical Contacts, Electromechanical Components and their Applications, Japan

IEPC - International Electrical Propulsion Conference

IPSTA – Israeli Conference on Plasma Physics and its Application

ICOPS - IEEE International Conference on Plasma Science

SPPT - Symposium on Plasma Physics and Technology

ECLIM- European Conf. on Laser Interaction with Matter

ICMGMFG - XII International Conference on Megagauss Magnetic Field Generation and Related Topics

 

1.         I.I. Beilis, G.V. Levchenko, V.S. Potokin, V.I. Rakhovsky, N.N. Rykalin, On the heat condition of the contacts high power switcher for the high current move arc discharge, UCEC MC, Moscow, March-April, 1965 (pp. 5).

2.         I.I. Beilis, G.M. Braterskaya, V.I. Rakhovsky, O.K. Teodorovich, Investigation of the erosion of metalceramics contacts on the base of silver and nickel for low current discharge, UCEC MC, Moscow, March-April, 1965 (pp. 7).

3.         I.I. Beilis, V.I. Rakhovsky, Investigation of heat conduction equation with nonlinear heat loss for move heat source. III Conference Science in Institute of High Temperatures Academy of Sciences, USSR, Moscow, 1968 (pp. 5).

4.         I.I. Beilis, V.I. Rakhovsky, Untersuchung der Erwarmung von Electroden durch wandernde Lichtbogenflecken, 4th ICEC Phenomena (pp. 69, Swansea, England, July 1968).

5.         I.I. Beilis, V.I. Rakhovsky, Heating of the electrodes of arc discharge, UCEC MC, Moscow, 1969 (pp. 10).

6.         I.I. Beilis, V.I. Rakhovsky, On the question of the possibility to use probes to investigate the arc discharge with electron beam, UCEC MC, Moscow, 1969 (pp. 7).

7.         I.I. Beilis, G.A. Lyubimov, V.I. Rakhovsky, About Mackeown equation employment for the estimation of the electric field in the near-cathode part of the arc. 9th ICPIG, Bucharest, Romania, Sept. 1969 (pp. 161.

8.         I.I. Beilis,  G.A. Lyubimov, V.I. Rakhovsky, Dynamics of variation of electron current fraction in the cathode region of the electrical arc, V ICEC Phenomena, Munich, Germany, May 1970 (p.p. 31-33).

9.         I.I. Beilis, G.A. Lyubimov, V.I. Rakhovsky, On the variation of charged particle density in an near-cathode region of arc discharge, XIVth UCEE, Tashkent, USSR, May 1970 (pp. 24).

10.      I.I. Beilis, G.A. Lyubimov, V.I. Rakhovsky, Theoretical investigation of the near cathode region in high current arc discharge, Ith UCPA, Moscow, USSR, Febr. 1971 (pp. 57).

11.      I.I. Beilis, Cathode spot of the arc discharge on different metal cathode, III UCPA, Minsk, USSR, May 1976 (pp. 162-163).

12.      I.I. Beilis, G.A. Lyubimov, On near-cathode region processes on film cathodes of the vacuum arc. VII ISDEIV, Novosibirsk, USSR, Aug. 1976 (pp. 308-311).

13.      I.I. Beilis, V.I. Zalkind, M.P. Zektser, A.S. Tikhotsky, Investigation of physical processes in the near-electrode region of the MHD generators, 15th SEAM, Philadelphia, Pennsylvania,  USA, May. 1976 (pp. 141-148).

14.      I.I. Beilis, Arc discharge and cathode erosion of metallic electrodes in a MHD-generator channel, 7th IC MHD EPG, Cambridge ( Mass.) USA, June 1980, MTI. V.2. (pp. 761-766).

15.      I.I. Beilis, The effect of electric field near the cathode surface upon parameters on the near-electrode region of arc discharge, IX ISDEIV, Eindhoven, Netherlands, Sept. 1980 (pp.65-68).

16.      I.I. Beilis, Parameters of the kinetic layer of arc discharge cathode region, XI ISDEIV, Berlin, GDR, September, 1984, (pp. 199-202).

17.      I.I. Beilis, Kinetic model of the near-cathode region of the arc discharge, VII WEP, Novosibirsk, Sept. 1986. INVITED LECTURE.

18.      Theory of the anode phenomena arc discharge.  Session scientific Council of Academy of Sciences of low temperature plasma.  Sukhumi, Oktober, 1987, INVITED LECTURE.

19.      I.I. Beilis, Near electrode phenomena in high current vacuum arc discharge.  II. All Union school for young scientists on near electrode phenomena, Moscow, February 1988, INVITED LECTURE.

20.      I.I. Beilis, Kinetic model for the arc discharges electrode region. XIII ISDEIV, Paris, France, June 1988 (pp. 184-186).

21.      Theory of Cathode Processes in Arc Discharge.  Cathode Drop Potential and Erosion Rate.  Session scientific Council of Academy of Sciences of low temperature plasma.  Leningrad, April, 1989, INVITED LECTURE.

22.      I.I. Beilis, V-A Characteristic of the cathode layer and erosion of the cathode electrical arc, UCHLTP, Novosibirsk, USSR, June 1989, Vol. II (pp. 34-35).

23.      I.I. Beilis, V.E. Ostashov, On the model of the high current plasmodynamic discharge, UCGLTP, Novosibirsk, USSR, June, 1989, Vol. 1 (pp. 194-195).

24.      I.I. Beilis, Physical processes in the vacuum arc near the refractory metal cathode, XIX ICPIG, Belgrade, Yugoslav, July 1989, Vol. 4 (pp. 730-731).

25.      I.I. Beilis, I.D. Garibashvily, G.A. Mesyats, V.A. Skvortsov, V.E. Fortov, Explosive-emission processes at the spike cathode of the vacuum breakdown, USHCE, May, Sverdlovsk, USSR, 1990 (pp. 29).

26.      I.I. Beilis, Physical processes at the mercury cathode of the vacuum arc, USHCE, May, Sverdlovsk, 1990 (pp. 32).

27.      I.I. Beilis, I.D. Garibashvily, G.A. Mesyats, V.A. Skvortsov, V.E. Fortov, Electromagnetic and gasdynamic of the explosive electron emission processes from metal spikes, XIVth ISDEIV Santa Fe, USA, Sept. 17-20, 1990 (pp. 548-551).

28.      I.I. Beilis, On the role of the space charge layer in the cathode mechanism of the vacuum arc, XIVth ISDEIV, Santa Fe, USA, Sept. 17-20 1990 (pp. 198-202).

29.      I.I. Beilis, Heat Instability of electrical current in the electrode in flowing low-temperature plasma.  III All-Union school for young scientists on near electrode phenomena, Tashkent USSR, September 26-30 1990, INVITED LECTURE.

30.      I.I. Beilis, A. Yu. Sevalnicov, Theoretical model of electrical arc column, XX ICPIG Pisa, Italy, July 1991 (pp. 1317-1318).

31.      I.I. Beilis, A. Yu. Sevalnicov, Analytical Method of Calculation parameters of electrical arc column, VIII UCLTP, Minsk, USSR, September 1991, II. (p. 133).

32.      I.I. Beilis, N.V. Volkov, Model of Extensive plasma in a short glow discharge, VIII UCLTP, Minsk, USSR, September 1991, I. (p. 84).

33.      I.I. Beilis, Existence Mechanism of Mercury Cathode Spots, XVth ISDEIV, Germany, Darmstadt, September 1992 (pp. 299).

34.      N. Parkansky, I.I. Beilis, R.L. Boxman, S. Goldsmith, Electrode Erosion During Pulsed Arcing, XVth ISDEIV, GERMANY, Darmstadt, September 1992 (pp. 490).

35.      I.I. Beilis, R.L. Boxman, M. Keidar, S. Goldsmith, The Kinetics of Macroparticles Charging in Strongly Ionized Plasma, Bulletin of the IPS, vol. 39, 1993 (pp.79).

36.      M. Keidar, I. Beilis, S. Goldsmith, R.L. Boxman, The Kinetics of Macroparticles Charging in Strongly Ionized Plasmas, XXI ICPIG, Bochum, Germany, Sept.  1993 (pp. 237-238).

37.      B. Alterkop, I. Beilis, R. Boxman, S. Goldsmith, Influence of Current Instabilities on the Parameters of the Vacuum Arc Plasma Jet, XIth ISDEIV, Russia, Moscow, May, 1994 (pp.76).

38.      I. Beilis + 9 authors, Filtered Vacuum Arc Deposition of Semi-Conductor Thin Films, XIth ISDEIV, Russia, Moscow, May 1994 (pp. 90).

39.      M. Keidar, I. Beilis, R.L. Boxman, S. Goldsmith, Non-Stationary Macroparticle Charging in Arc Plasma Jet, XIth ISDEIV, Russia, Moscow, May 1994 (pp.140).

40.      H. Rosenthal, I. Beilis, S. Goldsmith, R.L. Boxman, Experimental and Theoretical Study of the Temperature of a Hot Anode Vacuum Arc, XIth ISDEIV, Russia, Moscow, May, 1994 (pp. 164).

41.      I. Beilis, The cathode sheath instability in the mercury arc spot, Proc. of XII ESCAMPIG, Eindhoven, Netherlands, August, 1994 (pp.175-176).

42.      M. Keidar, I. Beilis, R.L. Boxman, S. Goldsmith, The Magnetic Presheath in the Plasma-Wall Transition, XXII ICPIG, Hoboken, USA, July-Aug. 1995, Vol. II, (pp. 157-158).

43.      M. Keidar, I. Beilis, R.L. Boxman, S. Goldsmith, Electrostatic Field Effect on the Transport of Macroparticles in Magnetized Plasma Ducts, 12th Intern. Symposium on Plasma Chemistry, Aug.21-25, 1995, Minneapolis, Minnesota, USA, Vol.III  (pp 1367-1372).

44.      M. Keidar, I. Beilis, R.L. Boxman, S. Goldsmith, The free MHD flow of the low-density vacuum arc plasma cathodic jet, Eighth Beer- Sheva, International Seminar on MHD-Flows and Turbulence, Jerusalem, Israel 1996 (pp.9).

45.      M. Keidar, I. Beilis, R.L. Boxman, S. Goldsmith, Vacuum arc plasma jet parameter distribution in the interelectrode gap in a magnetic field, Proceeding of the IPS, Jerusalem, vol. 42, 1996 (pp.182).

46.       R.L.Boxman, S. Goldsmith, V. Zitomirsky, E. Gidalevich, I. Beilis, M. Keidar, Filtered vacuum arc deposition, Proceeding of the IPS, Jerusalem, vol. 42, 1996 (pp.168).

47.      I. Beilis, B. Djakov, B. Juttner and H. Pursch, Number and Dynamics of Arc Cathode Spots in High Current Vacuum Discharges, National Conference of Germany Physical Society, 18-21 March, 1996, Rostock (pp.702).

48.      R.L. Boxman, S. Goldsmith, V. Zitomirsky,  E. Gidalevich, I. Beilis, M. Keidar, Recent progress in filtered vacuum arc deposition, ICMCTF,  San-Diego, California, April 1996 (pp.114).

49.      M. Keidar, I. Beilis, R.L. Boxman, S. Goldsmith, Macroparticle interaction with a substrate in cathodic vacuum arc deposition, ICMCTF,  San-Diego, California, April 1996 (pp.131).

50.      I.I. Beilis, State of the theory of cathode spot phenomena in vacuum arc, XIIth ISDEIV, USA, Berkeley, California, July 21-26, 1996 (pp.188-193).

51.      M. Keidar, I. Beilis, R.L. Boxman, S. Goldsmith, Potential and current distribution in the interelectrode gap of the vacuum arc in magnetic field, XIIth ISDEIV, USA, Berkeley, California, July 21-26, 1996 (pp.146-150).

52.      M. Keidar, I. Beilis, R. Aharonov, D. Arbilly, R.L. Boxman, S. Goldsmith, Macroparticle distribution in quarter torus separator of a filtered vacuum arc deposition system, ICMCTF,  San-Diego, California, April 1997 (pp.161)

53.      I. Beilis, M. Keidar, R.L. Boxman, S. Goldsmith, Macroparticle and plasma transport through positively biased separators in filtered vacuum arc deposition, ICMCTF,  San-Diego, California, April 1997 (pp.160)

54.      I. I. Beilis, M. Keidar, The Near Wall  Sheath-Presheath Transition in an Oblique Magnetic Field, XXIII ICPIG, Toulouse, France, July- 1997, Vol.II (pp. I-14 - 15).

55.      I. I. Beilis, R.L. Boxman, S. Goldsmith, The Plasma-Model of New Mode Hot Anode Vacuum Arc, XXIII ICPIG, Toulouse, France, July- 1997, Vol.II (pp. II-84 - 85).

56.      M. Keidar, I. I. Beilis, A. Anders, I. G. Broown, Numerical calculation of free vacuum arc plasma jet expansion in curved magnetic field, 16th Inter. Conf.on Numerical Solution of Plasmas, Santa Barbara, California, USA, February, 1998, p.90-93.

57.      I. I. Beilis, M. Keidar, R.L. Boxman, S. Goldsmith, Effect of  macroparticle separation in positively biased ducts in the filtered vacuum arc deposition systems, ICMCTF,  San-Diego, California, April 1998 (p.148-153)

58.      N. Parkansky, I.I. Beilis, R L. Boxman, S. Goldsmith and Yu. Rosenberg, "Anode mass loss during pulsed air arc deposition, ICMCTF, San-Diego, California, April 1998 (p.253-256)

59.      I. I. Beilis, M. Keidar, “Plasma-Wall transition layer in an oblique magnetic field in a ion and plasma sources”, 12th BEAMS’98, Haifa, Israel, June, 1998, (p.356)

60.      I. I. Beilis, M. Keidar, R.L. Boxman, S. Goldsmith, “Plasma expansion and current flow in a vacuum arc with a small anode” XVIIIth ISDEIV, Netherlands, Eindhoven, August 17-21, 1998 (pp.232-235).

61.      I. I. Beilis, R.L. Boxman, S. Goldsmith, “A vacuum arc with refractory hot anode” XVIIIth ISDEIV, Netherlands, Eindhoven, August 17-21, 1998 (pp.240-243).

62.      I. I. Beilis, “A cathode spot vacuum arc with graphite cathode” XVIIIth ISDEIV, Netherlands, Eindhoven, August 17-21, 1998 (pp.236-239).

63.      M. Keidar, I. I.  Beilis, I. G. Broown, ”Effect of Multiply Charged Ion Transport  in Vacuum arc plasma Jet”, IEEE International Conference on Plasma Science, Raleigh, North Carolina, June 1998. p. 7PD56

64.      I. I. Beilis, R.L. Boxman, S. Goldsmith, “Theoretical investigation of a hot refractory anode vacuum arc”, Proceeding of the IPS, Tel-Aviv, vol. 45, 1999 (p.213).

65.      I. I. Beilis, “Anode spot vacuum arc with graphite electrode”, Proceeding of the Inter. Conf. on Electrical Contacts, Electromechanical Components and their Applications, Nagoya, Japan, July, 1999, (p.p.101-107), INVITED.

66.      M. Keidar, I. .D. Boyd, I. I. Beilis, “Particulate interaction with plasma in a pulsed plasma thruster”, 26th International Electrical Propulsion Conference, Kitakyushu, Japan, October, 1999, IEPC paper 99-213.

67.      M. Keidar, I. .D. Boyd, I. I. Beilis, “A model of an electrical discharge in a co-axial pulsed plasma thruster”, 26th Inter. Elect. Prop. Conf., Kitakyushu, Japan, October, 1999, IEPC paper 99-214.

68.      I. I. Beilis, R.L. Boxman, S. Goldsmith, “The hot refractory anode vacuum arc and application for metallic film deposition”, Proceeding of the Third IPSTA, Beer Sheva, Ben-Gurion University, February, vol. 3, 2000, (p.15).

69.      I. I. Beilis, S. Goldsmith, R.L. Boxman, “The hot refractory anode vacuum arc – a new plasma source for metallic film deposition”, ICMCTF, San-Diego, California, April, 2000, (p.91-95)

70.      I. I. Beilis, “Modeling of the anode spot processes in vacuum arcs”, Proceeding of the IPS, Technion, Haifa, May, vol. 46, 2000 (p.101).

71.       M. Keidar, I.D. Boyd and I.I. Beilis, " A model of Teflon ablation in a pulsed plasma thruster", 27th IEEE International Conference on Plasma Science, New Orleans, LA, June 3-7, 2000; (IEEE Conference Record-Abstracts, IEEE Catalog No. 00CH37087, p. 241)

72.      I. I. Beilis, “Review of cathode spot phenomena in vacuum arcs”, Proceeding of the 20th ICEC 2000, June, Stockholm, Sweden, Norra Latin City Center, ISBN 91-7170-585-6, 2000, (p.133-140), INVITED

73.      I. I. Beilis, “Present state of the theory of vacuum arc” XIXth ISDEIV, China, Xi’an, September 18-22, 2000 (pp.150-159), INVITED LECTURE.

74.      I. I. Beilis, M. Keidar, “Theoretical study of plasma expansion and electrical characteristics in the high-current vacuum arc” XIXth ISDEIV, China, Xi’an, September 18-22, 2000 (pp.206-209).

75.      I. I. Beilis, R.L. Boxman, S. Goldsmith, “A non-stationary model for vacuum arcs with a refractory hot anode” XIXth ISDEIV , China, Xi’an, September 18-22, 2000  (pp.226-230).

76.      M. Keidar, I.D. Boyd and I.I. Beilis, “Model of an ablative discharge in the Teflon capillar of a pulsed plasma thruster”, 42th annular meeting APS Devision of Plasma Physics, Quebec City, Canada, October 2000, Bull. Am. Phys. Soc., Vol. 45 No. 7, pp. 92-93, 2000.

77.      I. I. Beilis, M. Keidar, “Plasma jet expansion and plasma voltage in the high-current vacuum arc in axial magnetic field”, Proceeding of the fourth IPSTA, Haifa Technion-Israeli Institut of Technology, February, 2001, (p.31).

78.      M. Keidar, I.D. Boyd and I.I. Beilis, “Analyses of the plasma flow and presheath structures in Hall thrusters”, 27th International Electrical Propulsion Conference, Pasadena, CA, October, 2001. IEPC-01-62

79.      I. I. Beilis, A. Nemirovsky, S. Goldsmith and R.L. Boxman “Thermal model of a hot refractory anode in a vacuum arc. Two-dimensional solution”, Proceeding of the 5th IPSTA, Rehovot, Weizmann Institut, 5 March, 2002, (p.5)

80.      M. Keidar, I.D. Boyd and I.I. Beilis, " Ionization layer at the edge of the accelerating plasma in a pulsed plasma thruster", 29th IEEE International Conference on Plasma Science, Banff, Canada, May 26-30, 2002; (IEEE Conference Record-Abstracts, IEEE Catalog No 02CH37340, p. 175)

81.      I.I. Beilis, A. Nemirovsky, S. Goldsmith, R.L. Boxman, “Two dimensional thermal model of a refractory anode in a Vacuum Arcs”, XXth Inter. Symp. on Discharges and Electrical Insulation in Vacuum, France, Tours, July, 2002, p 279-282.

82.      I.I. Beilis, “A model of cathode spot motion in a transverse magnetic field”, XXth Inter. Symp. on Discharges and Electrical Insulation in Vacuum, France, Tours, July, 2002, p. 154-157.

83.      I.I. Beilis, M. Keidar, “Electron temperature in the expanding cathode plasma jet in vacuum arc”, XXth Inter. Symp. on Discharges and Electrical Insulation in Vacuum, France, Tours, July, 2002, p. 535-538.

84.      I.G Levchenko, A.U. Voloshko, M. Keidar, and I.I. Beilis, “Unipolar arcs in high frequency fields”, XXth Inter. Symp. on Discharges and Electrical Insulation in Vacuum, France, Tours, July, 2002, p. 267-270.

85.      M. Keidar, I.D. Boyd and I.I. Beilis, Proceedings of 38th Joint Propulsion Conference and Exhibit, 7–10 July, 2002, Indianapolis, IN (American institute of Aeronautics and Astronautics, Reston, VA, 2004), AIAA-2002-4107.

86.      I.I. Beilis, A. Shashurin, D. Arbilly, S. Goldsmith and R.L. Boxman “A hot refractory anode vacuum arc and copper film deposition”, Proceeding of the 6th IPSTA, Holon, Academic Institute of Technology, 12 February, 2003, (p.23)

87.      I.I. Beilis, A. Shashurin, D. Arbilly, S. Goldsmith and R.L. Boxman “Copper film deposition by a hot refractory anode vacuum arc”, ICMCTF, San-Diego, California, April-May 2003, (p.40)

88.      I.I. Beilis, S. Goldsmith, R.L. Boxman, “Physical phenomena in a hot refractory anode vacuum arc”, Proceeding of the IPS, Bar-Ilan, vol. 49, 2003 (p.112).

89.      I.I. Beilis, A. Shashurin, A. Nemirovsky, S. Goldsmith, R.L. Boxman, “Temperature Distribution in an Asymmetric Molybdenum Anode of a Refractory Anode Vacuum Arc”, Proceeding of the 7th IPSTA, Tel Aviv, TAU, 1 February, 2004, (p.31)

90.      I.I. Beilis, A. Shashurin, A. Nemirovsky, S. Goldsmith, R.L. Boxman “Temperature of an Asymmetric Graphite Anode in a Refractory Anode Vacuum Arc”, Proceeding of the 7th IPSTA, Tel Aviv, TAU, 1 February, 2004, (p.45)

91.      I.I. Beilis, A. Shashurin, Y Sivan, S. Goldsmith, R.L. Boxman “Copper film deposition by a hot refractory anode vacuum arc and a magnetically filtered vacuum arc”, Proceeding of the 7th IPSTA, Tel Aviv, TAU, 1 February, 2004, (p.53)

92.      I.I. Beilis, A. Shashurin, A. Nemirovsky, S. Goldsmith and R.L. Boxman. Thermal Regime of Asymmetric Anode in a Hot Refractory Anode Vacuum Arc. 31th International Conference on Metallurgical Coatings and Thin Films, USA, San Diego, April 19-23, 2004, B2-1-10, p.34.

93.      M. Keidar, I.D. Boyd and I.I. Beilis, "Plasma flow in high-power thruster with anode layer", 31th IEEE International Conference on Plasma Science, Baltimore, Maryland, MD, 28 June-1 July 2004, (IEEE Conference Record-Abstracts, IEEE Catalog No.04CH37537, (p. 5D2)

94.      M. Keidar and I.I. Beilis, "Vacuum Arc Plasma Jets and their Applications", 31th IEEE International Conference on Plasma Science, Baltimore, Maryland, MD, 28 June-1 July 2004, (IEEE Conference Record-Abstracts, IEEE Catalog No.04CH37537, (p. 4D2).

95.      V.I.Oreshkin, R.B.Baksht, A.Yu.Labetsky, N.A.Ratakhin, A.G.Rousskikh, A.V.Shishlov,  P.R.Levashov,  K.V.Khishchenko, I.V.Glazyrin, I.I.Beilis “Numerical Simulation of Electric Explosions of Metal Wires” –31th  IEEE International Conference on Plasma Science, Baltimore, Maryland, MD, 28 June-1 July 2004, (IEEE Conference Record-Abstracts, IEEE Catalog No.04CH37537, 2P35 p.190.

96.      R. B. Baksht, V.I. Oreshkin, N.A. Ratakhin, A.V. Shishlov, A.G. Rousskich, A.Yu. Labetsky, P.R. Levashov, K.V. Khishchenko and I.I. Beilis, "Plasma flow in high-power thruster with anode layer", 31th IEEE International Conference on Plasma Science, Baltimore, Maryland, MD, 28 June-1 July 2004, (IEEE Conference Record-Abstracts, IEEE Catalog No.04CH37537, 4P38 (p. 294).

97.      M. Keidar and I.I. Beilis, “Transition from Plasma to Space-Charge Sheath Near the Electrode in Electrical Discharge”, XXIth Inter. Symp. on Discharges and Electrical Insulation in Vacuum, Ukraine, Yalta, September, 2004, p. 28-31.

98.      I.I. Beilis, “Ion Acceleration in Vacuum Arc Cathode Plasma Jet with Large Rate of Arc Current Rise XXIth Inter. Symp. on Discharges and Electrical Insulation in Vacuum, Ukraine, Yalta, September, 2004, p. 174-177.

99.      I.I. Beilis, A. Shashurin, A. Nemirovsky, S. Goldsmith, R.L. Boxman, “Measurements of the Molybdenum Anode Temperature in a Hot Refractory Anode Vacuum Arc”, XXIth Inter. Symp. on Discharges and Electrical Insulation in Vacuum, Ukraine, Yalta, September, 2004, p. 193-196.

100.  M. Laux, W. Schneider, B. Juttner, M. Balden, S, Linding, I.I. Beilis B. Djakov, ”Ignition and Burning of Vacuum Arcs on Tungsten layers”, XXIth Inter. Symp. on Discharges and Electrical Insulation in Vacuum, Ukraine, Yalta, September, 2004, p. 253-256.

101.   R.L. Boxman, I.I. Beilis, E. Gidalevich, V. Zhitomirsky, “Magnetic Control in Vacuum Arc Deposition
 – a Review”, XXIth Inter. Symp. on Discharges and Electrical Insulation in Vacuum, Ukraine, Yalta, September, 2004, p. 473-479. INVITED LECTURE.

102.  I.I. Beilis, A. Shashurin, A. Nemirovsky, S. Goldsmith, R.L. Boxman, “Deposition and Temperature Measurements in A Hot Refractory Anode Vacuum arc with Different Anode Materials”, 23rd IVS. Annual Conference and Technical Workshop, Tel Aviv, Exhibition Halls, September, 2004, p. P-TF-7.

103.  I.I. Beilis, A. Shashurin, A. Nemirovsky, S. Goldsmith, R.L. Boxman, “Thin film Deposited by a Hot Refractory Anode Vacuum arc with Graphite and molybdenum Anodes”, The Conference Coatings and Thin Films, Holon Academic Institute of Technology, Holon, October, 2004.

104.  A. Shashurin, I.I. Beilis, R.L. Boxman, S. Goldsmith, “Thin film Deposited by a Hot Refractory Anode Vacuum arc in a Presence of Background Gas”, Proceeding of the 8th IPSTA, The College of Judea and Samaria, Ariel, 23 January, 2005, (p.44)

105.  I.I. Beilis, A. Shashurin, R.L. Boxman and S. Goldsmith, “The background gas pressure influence on the thin film deposition and ion current in a Hot Refractory Anode Vacuum Arc”, International Conference on Metallurgical Coatings and Thin Films-2005, USA, San Diego, 2 - 6 May, 2005, p.24.

106.  В.И.Орешкин, Р.Б.Бакшт, А.Ю.Лабецкий, Н.А.Ратахин, А.Г.Русских, А.В.Шишлов, П.Р.Левашов, К.В.Хищенко, И.В.Глазырин, И.Бейлис «Моделирование процесса стратообразования в режиме быстрого взрыва проводников» – в кн: «Физика экстремальных состояний вещества», Черноголовка, 2005, стр.154-156.

107.  В.И.Орешкин, Р.Б.Бакшт, А.Ю.Лабецкий, Н.А.Ратахин, А.Г.Русских, А.В.Шишлов, П.Р.Левашов, И.В.Ломоносов, К.В.Хищенко, И.В.Глазырин, И.Бейлис «Перегревные неустойчивости при электрическом взрыве микропроводников» – 3-й симпозиум «Проблемы физики ультракоротких процессов в сильнонеравновесных средах», Новый Афон, 2005, стр.9.

108.  V.I. Oreshkin, R.B.Baksht, N.A.Ratakhin, A.Yu.Labetsky, A.G.Rousskikh, A.V.Shishlov, P.R.Levashov, K.V.Khishchenko, I.V.Glazyrin, I.Beilis, "The Thermal Instabilities on Electrical Explosion of Metal Wires", 6th International Conference on Dense Z-pinches, July 25th - 28th 2005, Oxford, ORAL LECTURE

109.  V.I. Oreshkin, R.B.Baksht, N.A.Ratakhin, A.Yu.Labetsky, A.G.Rousskikh, A.V.Shishlov, P.R.Levashov, K.V.Khishchenko, I.V.Glazyrin, I.Beilis, " Effect of the Thermal Instabilities on Electrical Explosion of Thin Metal Wires”, Zababakhin Scientific Talk, 2005, p.104 (Proceeding will be published in USA, APS)

110.  I.I. Beilis, A. Shashurin, A. Nemirovsky, R.L. Boxman and S. Goldsmith, “Plasma heat flux to asymmetric anodes in a Hot Refractory Anode Vacuum Arc”, 17th International Symposium on Plasma Chemistry-2005, Canada, Toronto, 7-12 August, CACT FASE University of Toronto, 2005, p.34.

111.  I.I. Beilis, “Kinetic of plasma particles and electron beam relaxation zone in a vacuum arc”, Workshop “Nonlocal, Collisionless Electron Transport in Plasmas”, USA, Princeton, PPPL, August 2-4, 2005, INVITED LECTURE

112.  M. Keidar and I.I. Beilis, “Electron transport in closed E´B drift devices”, Workshop “Nonlocal, Collisionless Electron Transport in Plasmas”, USA, Princeton, PPPL, August 2-4, 2005, INVITED LECTURE.

113.  A. Shashurin, I.I. Beilis, R.L. Boxman, S. Goldsmith, “TIME DEPENDENT TOTAL ION CURRENT MEASUREMENT IN A VACUUM ARC WITH REFRACTORY ANODE”, Proceeding of the 9th IPSTA, Ein-Gedi, 2 March, 2006, (p.12)

114.  I.I. Beilis, A. Shashurin, Y. Sivan, S. Goldsmith, and R.L. Boxman, “Copper film deposition rates by a hot refractory anode vacuum arc and magnetically filtered vacuum arc”, International Conference on Metallurgical Coatings and Thin Films-2006, USA, San Diego, 1-5 May, 2006, p.82.

115.  I.I. Beilis, “Laser Generated Plasma Interaction With Ablative Copper Target”, 29th European Conf. on Laser Interaction with Matter, ECLIM, 2006 Spain, Madrid, June 11-16; Proceedings, CSN, Eds: O. Cabelos, J. Sanz, V. Velarde, Madrid, p.407-412, 2006

116.  I.I. Beilis, “Laser Produced Plasma Interaction with a Matter” 22nd Symposium on Plasma Physics and Technology, Czech Republic, Prague, Institute of Plasma Physics, Academy of Sciences of the Czech Republic , June 26-29, 2006, (pp.141)

117.  I.I. Beilis, A. Shashurin, R.L. Boxman, “Measurement of ion flux as a function of background gas pressure in a Hot Refractory Anode Vacuum Arc”, XXIIth Inter. Symp. on Discharges and Electrical Insulation in Vacuum, Japan, Matsue September, 2006, p. 364-367.

118.  I.I. Beilis, “Non Steady Cathode Spot Operation at a Microprotrusion in a Vacuum Arc ”, XXIIth Inter. Symp. on Discharges and Electrical Insulation in Vacuum, Japan, Matsue September, 2006, p. 388-391.

119.  I.I. Beilis, D. Grach, A. Shashurin, R.L. Boxman, “COPPER METALLIZATION OF TRENCHES ON A SI WAFER USING A Hot Refractory Anode Vacuum Arc”, Proceeding of the 10th IPSTA, BGU, Beer Sheva 27 March, 2007, (p.25).

120.  I.I. Beilis, A. Shnaiderman, A. Shashurin, S. Goldsmith, R.L. Boxman, “VACUUM ARC WITH TUNGSTEN ANODE: ANODE TEMPERATURE AND FILM DEPOSITION”, Proceeding of the 10th IPSTA, BGU, Beer Sheva 27 March, 2007, (p.26).

121.  I.I. Beilis, A. Shnaiderman, A. Shashurin, R.L. Boxman and S. Goldsmith “Copper Film deposition and Anode Temperature Measurements in a Vacuum Arc with Tungsten Anode”, International Conference on Metallurgical Coatings and Thin Films-2007, USA, San Diego, 23-27 April, 2007, p.75.

122.  I.I. Beilis, D. Grach, A. Shashurin, R.L. Boxman, “Filling Trenches on a SiO Substrate with Cu Using a Hot Refractory Anode Vacuum Arc”, International Conference on Metallurgical Coatings and Thin Films-2007, USA, San Diego, 23-27 April, 2007, p.7.

123.  I.I. Beilis, Metallic Plasma Production by Laser Ablation, Intern. Workshop “Plasma Production by Laser Ablation”, June 14th– 16th, 2007, PPLA – 2007, Scilla, Italy.

124.  R.B. Baksht, I.I. Beilis, V.I. Oreshkin, A.G. Russkikh, Simulation of discharge phenomena evolved at wire explosion in vacuum, 28th ICPIG, July 15-20, 2007, Prague, Czech Republic, pp. 835-838.

125.  I.I. Beilis, D. Grach, A. Shashurin, R.L. Boxman, “Filling trenches on a SiO2 substrate with Cu by a Hot Refractory Anode Vacuum Arc plasma source”, 26rd IVS. Annual Conference and Technical Workshop, Herzliya, Israel Air Force House, September, 2007, p. P-VT-1.

126.  I.I. Beilis, A. Snaiderman, R.L. Boxman, “Chrome film deposition by a Hot Refractory Anode Vacuum Arc plasma source”, 26rd IVS. Annual Conference and Technical Workshop, Herzliya, Israel Air Force House, September, 2007, p. P-VT-2.

127.  I.I. Beilis, "Physical and mathematical models of laser plasma-target interaction", Istituto Nazionale di Fisica Nucleare - Laboratori Nazionali del Sud, Catania, Italy, 8, Nov, 2007, INVITED LECTURE.

128.  I.I. Beilis, "Calculation of laser generated plasma parameters, target heat regime and comparison with an experiment", Istituto Nazionale di Fisica Nucleare - Laboratori Nazionali del Sud, Catania, Italy, 9, Nov, 2007, INVITED LECTURE.

129.  I.I. Beilis, A. Shnaiderman, R.L. Boxman, “Chromium and titanium film deposition using a hot refractory anode vacuum arc plasma source”, International Conference on Metallurgical Coatings and Thin Films-2008, USA, San Diego, May, 2008.

130.  R.B. Baksht, I.I. Beilis, A.G. Rousskikh and S.A. Chaikovskii, “Study of wire explosion in vacuum at different electrode polarities” –35th IEEE International Conference on Plasma Science (ICOPS), Karlsruhe, Germany, 15-19 June 2008, (IEEE Conference Record-Abstracts, 2IEEE Catalog No.CFP08ICO-USB ISBN: 978-1-4244-1930-2) 3P48, p.378.

131.  A. G. Rousskikh, V. I. Oreshkin, S. A. Chaikovsky, N. A. Labetskaya, A. V. Shishlov, R.B. Baksht, and I.I. Beilis," X-ray radiography of exploded wires", XII International Conference on Megagauss Magnetic Field Generation and Related Topics, Abstaracts, Editor: Shvetsov, Novosibirsk, July 13-18,2008, p.127.

132.  I.I. Beilis, “Model of a Short Vacuum Arc Maintenance”, XXIIIth Inter. Symp. on Discharges and Electrical Insulation in Vacuum, Romania, Bucharest, September, 2008, p. 377-380.

133.  I.I. Beilis, D. Grach, R.L. Boxman, “Producing Cu Interconnections on a Si Substrate using a Hot Refractory Anode Vacuum Arc", XXIIIth Inter. Symp. on Discharges and Electrical Insulation in Vacuum, Romania, Bucharest, September, 2008, p. 579-572.

134.  I.I. Beilis, Y. Koulik, D. Arbilly and R.L. Boxman, “Aluminum film deposition by an expanding plasma from a Hot Refractory Anode Vacuum Arc” The 54th meeting of the IPS, BGU of Negev, vol. 54, 2008, 28, (07-1).

135.  I.I. Beilis, Y. Koulik, D. Arbilly and R.L. Boxman, “Aluminum film deposition using a vacuum arc with graphite anode” Proceeding of the 11th IPSTA, HUJ, Jerusalem, 1 February, 2009, P-18.

136.  I.I. Beilis, R.L. Boxman, “METALLIC FILM DEPOSITION USING A VACUUM ARC PLASMA SOURCE WITH A REFRACTORY ANODE”, International Conference on Metallurgical Coatings and Thin Films-2009, USA, San Diego, 27 April Session:B2-1-1, 2009. INVITED LECTURE.

137.  R.B. Baksht, A.G. Rousskikh, V. I. Oreshkin, I.I. Beilis, Wire Explosion in Vacuum: Velocity of Current-Carrying Corona and Strata Formation, 18th International Pulsed Power Conference, Chicago, Illinois, USA 2009, p.34.

138.  I.I. Beilis, Y. Koulik, R.L. Boxman, D. Arbilly “Thin film deposition using a plasma source with a Hot Refractory Anode Vacuum Arc", The 14th Israel Materials Engineering Conference (IMEC-14), Tel Aviv, December, 2009, p.361.

139.  I.I. Beilis, Y. Koulik, R.L. Boxman and D. Arbilly, “Volatile metal film deposition using a vacuum arc with a refractory anode” Proceeding of the 12th IPSTA, Technion, Haifa, 25 January, 2010, p.29.

140.  R.B. Baksht, I.I. Beilis, A. G. Rousskikh, V. I. Oreshkin, S. A. Chaikovsky, and N. A. Labetskaya, “Strata formation at wire explosion", Proceeding of the 12th IPSTA, Technion, Haifa, 25 January, 2010, p.36.

141.  I.I. Beilis, “Cathode Potential Drop at a Transient Cathode Spot on a Microprotrusion”, XXIVth Inter. Symp. on Discharges and Electrical Insulation in Vacuum, Germany, Braunschweig, September, 2010, p. 375-378.

142.  I.I. Beilis, Y. Koulik, R.L. Boxman,”Temperature Distribution Dependence on Refractory Anode Thickness in a Vacuum Arc”, XXIVth Inter. Symp. on Discharges and Electrical Insulation in Vacuum, Germany, Braunschweig, September, 2010, p. 379-382.

143.  Y. Koulik, I.I. Beilis, R.L. Boxman, "Refractory Anode Temperature Measurement in a Vacuum Arc" The 56th meeting of the IPS, TAU, vol. 56, 2010, 25, (PN-78).

144.  Y. Koulik, I.I. Beilis, R.L. Boxman, “Calculation of the Plasma Heat Flux and Temperature Distribution in Hot Refractory Anode Vacuum Arcs” Proceeding of the 13th IPSTA, Ariel University Center of Samaria, Ariel, 10 February, 2011, p.43.

145.  A. Shashurin, Jian Li, T. Zhaung, M. Keidar, I.I. Beilis, “Application of electrostatic Langmuir probes for plasmas with nanostructures produced by an atmospheric pressure anodic arc“, 20th International Symposium on Plasma Chemistry-2011, USA, Philadelphia, July 24 - 29, 2011, Drexel Plasma Institute, p.202.

146.  Y. Koulik, I.I. Beilis, R.L. Boxman, “Anode Thicknesses Influence on the Ion Current in a Vacuum Arc with Refractory Anode” Proceeding of the 14th IPSTA, Weizmann Institute of Science, Rehovot, 28 February, 2012, p.24.

147.  I.I. Beilis, Y. Koulik, R.L. Boxman,”Effective Cathode Voltage and Ion Current Measurements in a Vacuum Arc with a Black Body Electrode Configuration”, XXVth Inter. Symp. on Discharges and Electrical Insulation in Vacuum, Russia, Tomsk, September, 2012, p. 325-328.

148.  I.I. Beilis, ”Cathode Spot Development on a Bulk Cathode in a Vacuum Arc”, XXVth Inter. Symp. on Discharges and Electrical Insulation in Vacuum, Russia, Tomsk, September, 2012, p. 365-368.

149.   I.I. Beilis, Y. Koulik, R.L. Boxman,” Sn Thin Film Deposition using a Hot Refractory Anode Vacuum Arc”, Thirteenth International Conference on Plasma Surface Engineering (PSE 2012) on Garmisch-Partenkirchen, Germany, September, 2012, p. PO1052-ext-(1-4).

150.   A. Shashurin, M. Kundrapu, J. Loverich, I.I. Beilis and M. Keidar, Laboratory modeling of hypersonic flight conditions, 54th Annual Meeting of the APS Division of Plasma Physics Vol 57, N12, TP8.00087, Oct 29-Nov. 2, 2012; Providence, RI.

151.  T. Zhuang, A. Shashurin, D. Chiu, G. Teel, I.I. Beilis and M. Keidar, Experimental study of micro-cathode arc thruster, 54th Annual Meeting of the APS Division of Plasma Physics Vol 57, N12, TP8.00101, Oct. 29-Nov. 2, 2012; Providence, RI.

152.  B. Sagi, I.I. Beilis, V. Zhitomirsky, O. Margulis, and R.L. Boxman, Experimental Study of Cathode Spot Motion in a Vacuum Arc with a Long Rectangular Roof-shaped Cathode. The 3nd Department of Physical Electronics Conference, Monday, January 28, 2013.

153.  I.I. Beilis, Y. Koulik, R.L. Boxman, “Effective Cathode Voltage Increase in a Vacuum Arc with a Black Body Electrode Configuration” Proceeding of the 15th IPSTA, Holon, Academic Institute of Technology, 28 February, 2013, p.25.

154.  B. Sagi, I.I. Beilis, V. Zhitomirsky, O. Margulis, and R.L. Boxman, Experimental Study of Cathode Spot Motion in a Vacuum Arc with a Long Rectangular Roof-shaped Cathode Proceeding of the 15th IPSTA, Holon, Academic Institute of Technology, 28 February, 2013, p.32.

155.  I.I. Beilis, Physics of a Vacuum Arc for a Plasma Thruster Application, 33rd Intern. Electric Propulsion Conf. (IEPC), George Washington University, 6th-10th October 2013, IEPC-2013-391.

156.  B. Sagi, I.I. Beilis, V. Zhitomirsky, and R.L. Boxman, Cathode Spot Dynamics in a Vacuum Arc with an Oblong Roof Shaped Cathode in a Magnetic Field, Proceeding of the 16th IPSTA, Tel Aviv University, 5 February, 2014, p.47.

157.   I.I. Beilis, B. Sagi, V. Zhitomirsky, R.L. Boxman, ”Cathode Spot Motion in a Vacuum Arc with a Long Roof-shaped Cathode”, XXVIth Inter. Symp. on Discharges and Electrical Insulation in Vacuum, India, Mumbai, 28 Sept-3 Oct, 2014, p. 213-216.

158.  I.I. Beilis, Y. Koulik, E. Yankelevich, D. Arbilly, R.L. Boxman, ”Vacuum Arc Deposition using Refractory Electrodes”, XXVIth Inter. Symp. on Discharges and Electrical Insulation in Vacuum, India, Mumbai, 28 Sept-3 Oct, 2014, p. 513-516.

159.  N. Parkansky, V. Yakubov, I.I. Beilis, and R.L. Boxman, Submerged Arc in Methylene Blue Water Solution and Electrode Erosion, Proceeding of the 17th IPSTA, Ariel University, 17 February, 2015, p.40.

160.  I.I. Beilis, R.L. Boxman, Experimental Study of Vacuum Arcs with Refractory Anodes, Workshop MeVARC-5, Saariselka, Finnish Lapland, Finland, September 2-4, 2015 (Invited presentation, Website from MeVARC-5).

161.  I.I. Beilis, Metallic Plasma Production by Laser Ablation, 7th Intern. Conference “Plasma Production by Laser Ablation”, October 5th– 7th, 2015, PPLA – 2015, p.35, ENEA, Frascati, Italy.

162.  I.I. Beilis, Y. Koulik, R.L. Boxman, Anode Temperature Evolution in a Vacuum Arc with a Black Body Electrode Configuration, Proceeding of the 18th IPSTA, Ben Gurion University, Beer Sheva, 2 March, 2016.

163.  I.I. Beilis, A Model of Vacuum Arc Cathode Spot Motion in an Oblique Magnetic Field, XXVIIth Inter. Symp. on Discharges and Electrical Insulation in Vacuum, China, Suzhou, 18-23 Sept, 2016, p. 213-215.

164.  I.I. Beilis, Y. Koulik, R.L. Boxman, Anode Temperature Evolution in a Vacuum Arc with a Black Body Electrode Configuration XXVIIth Inter. Symp. on Discharges and Electrical Insulation in Vacuum, China, Suzhou, 18-23 Sept, 2016, p.295-297.

165.  I.I. Beilis, Y. Koulik, R.L. Boxman, "Anode Temperature Measurement in a Vacuum Arc with a Black Body Electrode Assembly" The 62th meeting of the IPS, TAU, 2016, 25 Dec, (PG-47).

 

 

PATENTS

 

1.       I.I. Beilis, R.L. Boxman, S. Goldsmith, M. Keidar and H. Rosenthal,  “DEPOSITION OF COATINGS AND THIN FILMS USING A VACUUM ARC WITH A NON-CONSUMABLE HOT ANODE”, USA patent, issued 21 May 2002, #6391164.

2.       I.I. Beilis, R.L. Boxman, S. Goldsmith, M. Keidar and H. Rosenthal, “DEPOSITION OF COATINGS AND THIN FILMS USING A VACUUM ARC WITH A NON-CONSUMABLE HOT ANODE”, Israeli patent, Data of Application 27/06/1999, Publication 21/02/2006, Grant 22/05/2006 #130650

3.       I.I. Beilis, R.L. Boxman, A. Shashurin, "DEVICE AND METHOD FOR THIN FILM DEPOSITION USING A VACUUM ARC IN AN ENCLOSED CATHODE-ANODE ASSEMBLY European patent application no. 07766879.6; US patent application no. 12/305,970".

 

 

Return to:
[ Isak Beilis's home |School of Electrical Engineering | Faculty of Engineering ]

Please send comments or questions about this page to: < webmaster@eng.tau.ac.il>

Last modified: March 2017