Journal of Microwave Power and Electromagnetic Energy (JMPEE)
TITLE	Continuous Recording Instrument for RF-exposure Measurements in FM/TV Broadcasting Towers [PDF]
AUTHORS	Kari Jokela and Markku Ylönen 1984 19 3 159-172
YEAR
VOLUME
ISSUE
PAGES
Abstract A continuously recording exposure meter has been developed for radio-frequency (RF) hazard measurements in FM/TV broadcasting towers for the frequency range 47-790 MHz. The instrument consists of an electrically-small dipole, loop probes and recording electronics. The dipole and loop are attached to the safety helmet; their distance from the head is ~ 7 cm. The dipole and loop respond to the tangential E field and radial H field, respectively. The error due to body proximity and one-dimensionality is 1 to 2 dB at 100 MHz and 2 to 3 dB at 200 MHz (for average power density measurements) if the probes move continuously and the measurement period is sufficiently long. Measurements in Finnish FM/TV towers showed that the average power density inside the tower increases with increasing power and decreasing antenna surface area. The highest levels have been found near UHF and FM antennas. For the FM band (100 MHz) the average H field exposures exceed the new ANSI standard value 10 W/m², but remain in most cases below 100 W/m². Local maxima may exceed 300 W/m².