Journal of Microwave Power and Electromagnetic Energy (JMPEE)
TITLE	High Frequency Electromagnetism, Heat Transfer And Fluid Flow Coupling In Ansys Multiphysics [PDF]
AUTHORS	C. M. Sabliov, D. A. Salvi and D. Boldor 2007 41 4 5-17
YEAR
VOLUME
ISSUE
PAGES
Abstract The goal of this study was to numerically predict the temperature of a liquid product heated in a continuous-flow focused microwave system by coupling high frequency electromagnetism, heat transfer, and fluid flow in ANSYS Multiphysics. The developed model was used to determine the temperature change in water processed in a 915 MHz microwave unit, under steady-state conditions. The influence of the flow rates on the temperature distribution in the liquid was assessed. Results showed that the average temperature of water increased from 25°C to 34°C at 2l1min. and to 4rC at 111min. The highest temperature regions were found in the liquid near the center of the tube, followed by progressively lower temperature regions as the radial distance from the center increased, and finally followed by a slightly higher temperature region near the tube's wall corresponding to the energy distribution given by the Mathieu function. The energy distribution resulted in a similar temperature pattern, with the highest temperatures close to the center of the tube and lower at the walls. The presented ANSYS Multiphysics model can be easily improved to account for complex boundary conditions, phase change, temperature dependent properties, and non-Newtonian flows, which makes for an objective of future studies. Keywords: ANSYS Multiphysics, coupling models, electromagnetics, fluid flow, heat transfer, microwave heating, numerical analysis