List of Publications
BOOKS
- R. Gilat and L. Banks-Sills (eds),
Advances in Mathematical Modeling and
Experimental Methods for Materials and Structures,
The Jacob Aboudi Volume, Springer, The Netherlands (2010).
ARTICLES
- L. Banks-Sills and D. Sherman, "Elasto-Plastic Analysis
of a Mode II Fracture Specimen", International Journal of Fracture,
46, (1990), 105-122.
- L. Banks-Sills, "Application of the Finite Element Method
to Linear Elastic Fracture Mechanics", Applied Mechanics Reviews,
44, (1991), 447-461.
- L. Banks-Sills and Y. Volpert, "Application of the Cyclic
J-Integral to Fatigue Crack Propagation of Al 2024-T351",
Engineering Fracture Mechanics, 40, (1991), 355-370.
- L. Banks-Sills and D. Sherman, "JII Fracture Testing
of a Plastically Deforming Material", International Journal of
Fracture, 50, (1991), 15-26.
- L. Banks-Sills and R. Kopelman, "On the Computation of
Stress Intensity Factors for Three-Dimensional Geometries with Singular,
Twenty-Seven Noded, Distorted Elements", Journal of Computers and
Structures, 41, (1991), 981-986.
- L. Banks-Sills and D. Sherman, "On the Computation of
Stress-Intensity Factors for Three-Dimensional Geometries by Means of the
Stiffness Derivative and J-Integral Methods", International Journal
of Fracture, 53, (1992), 1-20.
- M. Ryvkin and L. Banks-Sills, "Steady State Mode III
Propagation of an Interface Crack in an Inhomogeneous Viscoelastic Strip",
International Journal of Solids and Structures, 30, (1993), 483-498.
- L. Banks-Sills, "Weight Functions for Interface Cracks",
International Journal of Fracture, 60, (1993), 89-95.
- M. Ryvkin and L. Banks-Sills, "Mode III Delamination of a
Viscoelastic Strip from a Dissimilar Viscoelastic Half-Plane",
International Journal of Solids and Structures, 31, (1994), 551-566.
- L. Banks-Sills and R. Salganik, "An Asymptotic Approach
Applied to a Longitudinal Crack in an Adhesive Layer", International
Journal of Fracture, 68, (1994), 55-73.
- L. Banks-Sills, E. Dagani, R. Eliasi, E. Reinberg and
R. Schwartzman, "Analysis and Testing of Surface Cold Work Procedures
Applied to Notched Flat Elements", Fatigue and Fracture of
Engineering Materials and Structures, 17, (1994), 1371-1381.
- D. Lewinstein, L. Banks-Sills and R. Eliasi, "Finite
Element Analysis of a New System (IL) for Supporting an Implant Retained
Cantilever Prosthesis", The International Journal of Oral and
Maxillofacial Implants, 10, (1995), 335-366.
- M. Ryvkin, L. Slepyan and L. Banks-Sills, "On the Scale
Effect in the Thin Layer Delamination Problem", International Journal
of Fracture, 71, (1995), 247-271.
- L. Banks-Sills and E. Makevet, "A Numerical Mode I Weight
Function for Calculating Stress Intensity Factors of Three-Dimensional
Cracked Bodies", International Journal of Fracture, 76, (1996),
169-191.
- L. Banks-Sills and I. Dunye, "A Note on the Effect of
Plastic Strain on Fracture Toughness", Engineering Fracture
Mechanics, 57, (1997), 67-73.
- L. Banks-Sills, D. Askenazi and R. Eliasi, "Determination
of the Effect of Residual Curing Stresses on an Interface Crack by means
of the Weight Function Method", Journal
of Computational Mechanics, 19, (1997), 507-510.
- L. Banks-Sills, V. Leiderman and D. Fang, "On the
Effect of Particle Shape and Orientation on Elastic Properties
of Metal Matrix Composites", Composites
Engineering Journal, Part B, 28B, (1997), 465-481.
- L. Banks-Sills, Y.Y. Yang and D. Munz, "An Influence
Function for Stress Intensity Factors of Bimaterial Notched Bodies",
International Journal of Fracture, 85, (1997), 333-350.
- L. Banks-Sills, "A Conservative Integral for Determining
Stress Intensity Factors of a Bimaterial Strip", International
Journal of Fracture, 86, (1997), 385-398.
- L. Banks-Sills, "The Bimaterial Notch Problem",
IUTAM Symposium, Non-linear Singularities in Deformation and Flow,
eds. D. Durban and J.R.A. Pearson, Kluwer Acacemic Publishers, Dordrecht,
(1999), 55-61.
- L. Banks-Sills and V. Leiderman, "A
Macro-mechanical Material Model for Fiber Reinforced Metal-Matrix Composites",
Composites Engineering Journal, Part B, 30, (1999), 443-452.
- L. Banks-Sills, N. Travitzky, D. Ashkenazi and
R. Eliasi, "A Methodology for Measuring Interface Fracture Toughness
of Composite Materials", International Journal of
Fracture, 99, (1999), 143-161.
- L. Banks-Sills and R. Eliasi, "Fatigue Life Analysis
of a Cannon Barrel", Engineering Failure Analysis, 6, (1999),
371-385.
- L. Banks-Sills and D. Ashkenazi, "A Note on Fracture
Criteria for Interface Fracture", International
Journal of Fracture, 103, (2000), 177-188.
- L.Banks-Sills, N. Travitzky and D. Ashkenazi,
"Interface Fracture Properties of a Bimaterial Ceramic
Composite", Mechanics of Materials, 32, (2000), 711-722.
- L. Banks-Sills and V. Boniface, "Fracture
Mechanics for an Interface Crack between a Special Pair of
Transversely Isotropic Materials", Multiscale Deformation
and Fracture in Materials and Structures-The James R. Rice 60th
Anniversary Volume, eds. T.-J. Chuang and J.W. Rudnicki, Kluwer
Academic Publishers, The Netherlands, (2000), 183-204.
- C.-S Chen, R. Krause, R.G. Pettit, L. Banks-Sills
and A.R. Ingraffea, "Numerical Assessment of T-stress Computation
using a P-version Finite Element Method", International
Journal of Fracture, 107, (2001), 177-199.
- L. Banks-Sills, "Experiments for Measuring
Interface Fracture Properties", Advances in the Mechanics of
Plates and Shells-The Avinoam Libai 70th Anniversary Volume,
eds. D. Durban, D. Givoli and J.D. Simmonds, Kluwer Academic
Publushers, The Netherlands, (2001), 49-66.
- L. Banks-Sills, R. Eliasi and Y. Berlin,
"Modeling of Functionally Graded Materials in Dynamic Analyses",
Composites Engineering Journal, Part B, 33, (2002), 7-15.
- I. Goldfarb, L. Banks-Sills, R. Eliasi and G.A.D.
Briggs, "Finite Element Analysis of CoSi2
Nanocrystals on
Si(001)", Interface Science, 10, (2002), 75-81.
- V. Boniface and L. Banks-Sills, "Stress Intensity
Factors for Finite Interface Cracks between a Special Pair of
Transversely Isotropic Materials", Journal of Applied
Mechanics, 69, (2002), 230-239.
- R. Shahar and L. Banks-Sills, "Biomechanical
Analysis of the Canine Hind Limb: Calculation of Forces During
Three-Legged Stance", The Veterinary Journal, 163, (2002), 240-250.
- L. Banks-Sills and A. Sherer, "A Conservative Integral
for Determining Stress Intensity Factors of a Bimaterial Notch", International Journal of Fracture, 115, (2002), 1-26.
- L. Banks-Sills and J. Schwartz, "Crack Paths in
Adhesive Bonds", Recent Advances in Experimental
Mechanics - In Honor of Professor I.M. Daniel, ed. E.E. Gdoutos,
Kluwer Academic Publishers, Netherlands, (2002) 225-234.
- L. Banks-Sills, J. Schwartz and V. Fourman, "Measurement of
Fracture Properties of Bonded Joints", Structural Integrity
and Fracture, eds. A.V. Dyskin, X. Hu, E. Sahouryeh, A.A. Balkema
Publishers, Tokyo, (2002) 97-100.
- L. Banks-Sills and J. Schwartz, "Fracture Testing of
Brazilian Disk Sandwich Specimens", International Journal of
Fracture, 118, (2002) 191-209.
- R. Shahar, L. Banks-Sills and R. Eliasi, "Stress
and Strain Distribution in the Intact Canine Femur: Finite Element
Analysis", Medical Engineering and Physics, 25, (2003), 387-395.
- R. Shahar, L. Banks-Sills and R. Eliasi,
"Mechanics of the canine femur with two types of hip replacement
stems: finite element analysis", Veterinary
Comparative Orthopedics and Traumatology, 16, (2003) 145-152.
- L. Banks-Sills, V. Boniface and R. Eliasi, "Effect of
Residual Stresses on Delaminations in Fiber Reinforced
Composites", Interface Science, 11, (2003), 339-348.
- N. Eliaz, L. Banks-Sills, D. Ashkenazi, and R.
Eliasi, "Modeling Failure of Metallic Glasses Due to Hydrogen
Embrittlement in the Absence of External Loads", Acta
Materialia, 52, (2004), 93-105.
- A. Dorogoy and L. Banks-Sills, "Shear Loaded Interface
Crack under the Influence of Friction - a Finite Difference
Solution", International Journal for Numerical Methods in Engineering, 52, (2004), 93-105.
- L. Banks-Sills and C. Ishbir, "A Conservative Integral
for Bimaterial Notches Subjected to Thermal Stresses", International Journal for Numerical Methods in Engineering, 60, (2004), 1075-1102.
- L. Banks-Sills and O. Dolev, "The Conservative
M-Integral for Thermal-Elastic Problems", International Journal of Fracture, 125, (2004), 149-170.
- I. Goldfarb, L. Banks-Sills and R. Eliasi, "Si-Capping of
Ge Nanohuts on Si(001) Analysed by Scanning Tunneling Microscopy
and the Finite Element Method", Applied Physics Letters,
85, (2004), 1781-1783.
- R. Shahar and L. Banks-Sills, "A Three-Dimensional
Mathematical Knee Model", Journal of Biomechanics, 37,
(2004), 1849-1859.
- L. Banks-Sills, V. Boniface and R. Eliasi, "Development of
a Methodology for Determination of Interface Fracture Toughness of
Laminate Composites-the 0o/90o
Pair",
International Journal of Solids and Structures, 42, (2005),
663-680.
- L. Banks-Sills, I. Hershkovitz, P.A. Wawrzynek, R. Eliasi
and A.R. Ingraffea, "Methods for Calculating Stress Intensity
Factors in Anisotropic Materials: Part I -z = 0 is a
Symmetric Plane", Engineering Fracture
Mechanics, 72, (2005), 2328-2358.
- Y. Freed and L. Banks-Sills, "A Through
Interface Crack Between a ±45o Transversely
Isotropic Pair of Materials", International Journal of
Fracture, 133, (2005), 1-41.
- A. Dorogoy and L. Banks-Sills, "Effect of
Crack Face Contact and Friction on Brazilian Disk Specimens - A
Finite Difference Solution",Engineering Fracture
Mechanics, 72 (2005) 2758-2773 .
- L. Banks-Sills, Y. Freed, R. Eliasi and V.
Fourman, "Fracture Toughness of the +450/-450
Interface of a Laminate Composite", International Journal of
Fracture, 141 (2006) 195-210.
- I. Goldfarb, L. Banks-Sills and R. Eliasi,
"Is the Elongation of Ge Huts in a Low-Temperature Regime Really
Governed by Kinetics?", Physical Review Letters, 97 (2006)
206101. Note: this paper has also been selected for the November 27,
2006 issue of the Virtual Journal of Nanoscale Science and
Technology, that covers a focused area of frontier research.
- L. Banks-Sills, P.A. Wawrzynek, B. Carter, A.R.
Ingraffea and I. Hershkovitz, "Methods for Calculating Stress
Intensity Factors in Anisotropic Materials: Part II - Arbitrary
Geometry", Engineering Fracture Mechanics, 74 (2007) 1293-1307.
- Y. Freed and L. Banks-Sills, "Crack Growth
Resistance of Shape Memory Alloys by Means of a Cohesive Zone
Model", Journal of the Mechanics and Physics of Solids, 55
(2007) 2157-2180.
- L. Banks-Sills, Y. Motola and L. Shemesh, "The M-integral for
Calculating Intensity Factors of an Impermeable Crack in a
Piezoelectric Material", Engineering Fracture
Mechanics, 75 (2008) 901-925..
- N. Eliaz and L. Banks-Sills, "Chemical Potential, Diffusion and
Stress - Common Confusions in Nomenclature and Units", Corrosion Reviews, 26 (2008) 87-103.
- Y. Freed and L. Banks-Sills, "A New Cohesive
Zone Model for Mixed Mode Interface Fracture in Bimaterials",
Engineering Fracture Mechanics, 75 (2008) 4583-4593, DOI:
10.1016 /j.engfracmech.2008.04.013.
- Y. Freed, L. Banks-Sills and J. Aboudi, "On the
Transformation Toughening of a Crack Along an Interface Between a
Shape Memory Alloy and an Isotropic Medium", Journal of the
Mechanics and Physics of Solids, 56 (2008) 3003-3020, DOI: 10.1016/jmps.2008.06.003.
- Y. Motola and L. Banks-Sills, "M-Integral for
Calculating Intensity Factors of Cracked Piezoelectric Materials
using the Exact Boundary Conditions", Journal of
Applied Mechanics, 76 (2009) 011004, DOI: 10.1115/1.2998485.
- Y. Motola and L. Banks-Sills, "A Note on Tensile Testing of
Poled and Unpoled Piezoelectric Ceramics", Strain, 45 (2009) 85-92,
DOI: 10.1111/j.1475-1305.2008.00477.x.
- L. Banks-Sills, Y. Freed and A. Alperovitch,
"Behavior of a Flat Internal Delamination Within a Fiber Reinforced
Cross-Ply Composite", International Journal of Fracture, 155 (2009) 127-142, DOI 10.1007/s10704-009-9335-6.
- Y. Motola, L. Banks-Sills and V. Fourman, "On Fracture Testing of Piezoelectric Ceramics",
International Journal of Fracture , 159 (2009) 167-190, DOI 10.1007/s10704-009-9392-x.
- L. Banks-Sills, J. Shklovsky, S. Krylov, H. Bruck, V. Fourman and R. Eliasi, "A Methodology for Accurately Measuring Mechanical Properties on the Micro-Scale",
Strain, DOI 10.1111/j.1475-1305.2009.00692.x.
- Banks-Sills, "Update - Application of the Finite Element Method to Linear Elastic
Fracture Mechanics", Applied Mechanics Reviews, 63 (2010) DOI: 10.1115/1.4000798.
- L. Banks-Sills, N. Konovalov and A. Fliesher, "Comparison of Two and Three-Dimensional Analyses
of Interface Fracture Data Obtained from Brazilian Disk Specimens", to appear: International Journal of Structural Integrity.
Presentations
- R. Schwartzman and L. Banks-Sills, "The Effect of a Local
Cold Work Process at Notches on Fatigue Crack Propagation", Twenty-fifth
Israel Conference on Mechanical Engineering, 1991, Haifa, Israel.
- L. Banks-Sills, "Weight Functions for Interface Crack
Problems", ESIS Ceramics Workshop, 1992, Lyon, France.
- I. Lewenstein, L. Banks-Sills and R. Eliasi, "A New
System (IL) for Supporting an Implant Retained Cantilever Prosthesis",
International Symposium of Implant Dentisty, 1994, San Diego, California.
- L. Slepyan, M. Ryvkin and L. Banks-Sills, "Double
Asymptotic Solution to the Thin Layer Delamination Eigen-Problem",
Localized Damage 94, 1994, Udine, Italy.
- Banks-Sills, D. Askenazi and R. Eliasi, "Determination
of the Effect of Residual Curing Stresses on an Interface Crack by means
of the Weight Function Method", IUTAM Symposium on Innovative Numerical
Methods in Fracture Mechanics, 1996, Dublin, Ireland.
- L. Banks-Sills and V. Leiderman, "A Macro-Mechanical
Elasto-Plastic Model
for Fiber-Reinforced Composites", Plasticity-97, 1997, Juneau, Alaska.
- L. Banks-Sills and V. Leiderman, "Elastic and Elasto-Plastic
Behavior of Composite Material: Micro and Macro Analyses", Symposium
on Composite Structures, 1998, Haifa, Israel.
- L. Banks-Sills, "A Conservative Integral for Bimaterial
Strips", First Israel-France Bi-National Workshop on Failure of
Materials, 1998, Kyriat Anavim, Israel.
- D. Askenazi, L. Banks-Sills, N. Travitzky and R. Eliasi,
"Measurements of Interface Fracture Properties of Composite Materials",
Mechanical Engineering Conference, 1998, Haifa, Israel.
- L. Banks-Sills, N. Travitzky and D. Askenazi,
"Measurement of Interface Fracture Properties of Two Ceramic Clays",
ASME Mechanics and Materials Conference, 1999, Blacksburg, Virginia.
- L. Banks-Sills, N. Travitzky and D. Askenazi,
"Interface Fracture Toughness of Two Ceramic Clays", ESIS
TC6-Ceramics, Meeting, 1999, Leuven, Belgium.
- I. Lewinstein, L. Banks-Sills, R. Eliasi and Y. Zippori, "Effect of
Cortical Bone Removal on Stress in a Cantilevered Fixed
Prostheses: Finite Element Analysis", Fifteenth Annual Meeting of
Osseointegration, 2000, New Orleans, Louisiana.
- L. Banks-Sills, "Conservative Integrals for Calculating
Stress Intensity Factors in Bimaterial Bodies", IUTAM Symposium on
Analytical and Computational Fracture Mechanics of Non-Homogeneous
Materials, 2001, Cardiff, Wales.
- L. Banks-Sills and V. Boniface, "Fracture Mechanics of an
Interface Crack Between a Special Pair of Transversely Isotropic
Materials", 33rd National Symposium on Fatigue and Fracture Mechanics,
American Society for Testing and Materials, 2001, Moran, Wyoming.
- L. Banks-Sills, V. Boniface and R. Eliasi, "Effect of
Residual Stresses on Interface Cracks of Laminated Composites",
Tenth International Congress on Fracture, 2001, Honolulu, Hawaii.
- L. Banks-Sills and J. Schwartz, "Crack Paths in
Adhesive Bonds", 14th U.S. National Congress of Theoretical and
Applied Mechanics, 2002, Blacksburg, Virginia.
- Banks-Sills, J. Schwartz and V. Fourman, "Measurement of
Fracture Properties of Bonded Joints", International Conference of
Structural Integrity and Fracture, SIF 2002, Perth, Australia.
- L. Banks-Sills, V. Boniface, R. Eliasi and
V. Fourman, "Delamination Toughness of the
0o/90o
Interface in Carbon Fiber/Epoxy Composites", International
Conference on the Mechanical Behavior of Materials-9, 2003,
Geneva, Switzerland.
- L. Banks-Sills and C. Ishbir, "Calculation of
Stress Intensity Factors for Bimaterial Notches Thermal
Stresses", Second MIT Conference on Computational Fluid and Solid
Mechanics, 2003, Cambridge, Massachusetts.
- L. Banks-Sills, "Finite Elements and Fracture
Mechanics", Israel Society for Computational Mechanics, 2003, Tel
Aviv, Israel.
- N. Eliaz, L. Banks-Sills, D. Ashkenazi and R. Eliasi, "Coupled
Diffusion/Stress Finite Element Analysis Used to Model
Environmentally-Assisted Cracking in Amorphous Alloys, Materials
Research Society, 2003, Boston, Massachusetts.
- L. Banks-Sills, V. Boniface, R. Eliasi and V.
Fourman, "Toughness of the 0o/90oInterface in
Fiber Reinforced Material", Israel Association of Theoretical and
Applied Mechanics, 2003, Tel Aviv.
- D. Ashkenazi, N. Eliaz, L. Banks-Sills and R. Eliasi,
"Coupled Diffusion/Stress Finite Element Analyses used to Model
Environmentally-Assisted Cracking in Amorphous Alloys", The 11th
Israel Material Engineering Conference - IMEC-11, 2003, Haifa.
- N. Eliaz, D. Ashkenazi, L. Banks-Sills and R. Eliasi, "Life
Predictions for Hydrogen-Induced Cracking of Glassy Ribbons by
means of Coupled Diffusion/Stress Finite Element Anaysis", The 6th
Biannual Conference on the Corrosion Forum NACE Israel, 2004,
Karmiel.
- L. Banks-Sills, V. Boniface, R. Eliasi and V. Fourman,
"Experiments for Determining the Delamination Toughness of a
0o/90o Interface", The International Conference on
Experimental Mechanics, 2004, Bari, Italy.
- L. Banks-Sills, Y. Freed, R. Eliasi and V.
Fourman, "Interface Toughness for Laminate Composites - the
+45o/-45o Interface", European Conference on
Fracture 16, 2006, Alexandroupolis, Greece.
- I. Kressel, L. Banks-Sills and S. Gali,
"Effect of a Partially Bonded Patch on Crack Propagation in Metallic
Structures", Composites Symposium, Technion, Israel, 2006.
- L. Banks-Sills, Y. Motola and L. Shemesh,
"A Conservative Integral for Piezoelectric Ceramics with
Impermeable Crack Face Conditions", Nineteenth Nordic Seminar on
Computational Mechanics, Lund, Sweden, 2006.
- Y. Motola and L. Banks-Sills, "M-integral for
Piezoelectric Ceramics using the Exact Boundary Conditions on
Crack Surfaces", Thirteenth International Conference on
Experimental Mechanics, Alexandroupolis, Greece, 2007.
- P. Ståhle and L. Banks-Sills, "Growth of Cortical Bone Controlled by
Strain Driven Diffusion", Broberg Symposium, Dublin, Ireland,
2007.
- P. Ståhle and L. Banks-Sills, "Belastningsstimulerad Tillväxt av
Kortikalt Benn", Swedish Mechanics Days, Luleå, Sweden, 2007.
- L. Banks-Sills, "Interfacial Fracture Toughness Between Layers of Fiber Reinforced Material in Different Directions", keynote, European Conference on Fracture 17, Brno, The Czech Republic, 2008.
- L. Banks-Sills, Y. Motola and V. Fourman, Fracture Testing of PZT-5H Piezoceramics", British Society of Strain Measurement 6, Teddington, United Kingdom, 2008.
- L. Rogel and L. Banks-Sills, "A Through Interface Crack Between
a Transversely Isotropic Pair of Materials -30o/+60o", Composites Symposium, Technion, Israel, 2008.
- L. Banks-Sills, Y. Motola and V. Fourman, "A Fracture Criterion for Piezoelectric Ceramics", Broberg Symposium, Sweden, 2009.
Conference Papers
-
L. Banks-Sills, "Experiments for Measuring
Interface Fracture Properties", Advances in the Mechanics of
Plates and Shells-The Avinoam Libai 70th Anniversary Volume,
eds. D. Durban, D. Givoli and J.D. Simmonds, Kluwer Academic
Publushers, The Netherlands, (2001), 49-66.
- L. Banks-Sills and J. Schwartz, "Crack Paths in
Adhesive Bonds", Recent Advances in Experimental Mechanics -
In Honor of Professor I.M. Daniel, ed. E.E. Gdoutos, Kluwer
Academic Publishers, Netherlands, (2002) 225-234.
- L. Banks-Sills, J. Schwartz and V. Fourman, "Measurement of
Fracture Properties of Bonded Joints", Structural Integrity
and Fracture, eds. A.V. Dyskin, X. Hu, E. Sahouryeh, A.A. Balkema
Publishers, Tokyo, (2002) 97-100.
- N. Eliaz, L. Banks-Sills, D. Ashkenazi and R. Eliasi,
"Hydrogen-Assisted Cracking of Iron-Based Amorphous Alloys:
Experimental and Finite Element Observations", Proceedings of the
2nd International Conference on Environment-Induced Cracking of
Metals - EICM-2, Elsevier (2004), Banff, Canada.
- Y. Freed and L. Banks-Sills, "A Crack Along the Interface
Between Two Transversely Isotropic Materials - the
±45o Pair", Proceedings of the International Conference on
Computational and Experimental Engineering Sciences, 2004,
Madiera, Portugal.
- L. Banks-Sills and Y. Freed, "Calculation of Stress Intensity
Factors for a Crack along the ±45o Interface of a
Fiber Reinforced Material", Proceedings of the Eleventh
International Conference of Fracture, ICF11, 2005, Torino, Italy.
- Y. Motola and L. Banks-Sills, "Extracting Intensity Factors for
Cracked Piezoelectric Bodies", Proceedings of the 46th Israel
Annual Conference on Aerospace Sciences, 2006, Tel Aviv, Israel.
- D. Decad, J. Aboudi and L. Banks-Sills, "Micromechanics-Based
Modelong of Woven Composite Materials", Proceedings of the 47th
Israel Annual Conference on Aerospace Sciences, 2007, Tel Aviv,
Israel.
- N. Konovalov and L. Banks-Sills, "Examination of
Out-of-Plane Deformation in Three-Dimensional Interface Crack
Problems", Proceedings of the 48th Israel Annual Conference on
Aerospace Sciences, 2008, Tel Aviv, Israel.
- Y. Freed, L. Banks-Sills and J. Aboudi, "On the Transformation
Toughening of a Crack along an Interface Between a Shape Memory
Alloy and an Isotropic Medium", keynote,
The 5th European Congress on Computational Methods in Applied Sciences and
Engineering, ECCOMAS, 2008, Venice, Italy.
- Y. Motola and L. Banks-Sills, "Fracture Criterion
for Piezoelectric Ceramics Using the Exact Boundary Conditions Applied
to the Crack Surfaces", The 5th European Congress on Computational
Methods in Applied Sciences and Engineering, ECCOMAS, 2008, Venice, Italy.
- A. Dorogoy and L. Banks-Sills, "A Rigid Punch on an Elastic Half Space Under the Effect of Friction .- a Finite Difference Solution", The 9th Biennial ASME Conference on Engineering Systems, Design and Analysis, ESDA2008, 2008, Haifa, Israel.
- L. Banks-Sills, J. Shklovsky, S. Krylov, H. Bruck, V. Fourman and R. Eliasi, "Development of a Methodology for Measurement of
Mechanical Properties of Materials Used on the Microscale", International Congress on Fracture, 2009, Ottawa, Canada.
- L. Banks-Sills, N. Konovalov and A. Fliesher, "The Effect of Out-of-Plane Deformation on Interface Fracture", International Congress on Fracture, 2009, Ottawa, Canada.
- L. Banks-Sills and Y. Motola, "A Fracture Criterion for Piezoelectric Material", IUTAM Symposium (GA.06-16)
"Multiscale Modelling of Fatigue, Damage and Fracture in Smart Materials Systems",
2009, Freiberg, Germany.
Return to:
[
Leslie Banks-Sills's home |
School of Mechanival Engineering |
Faculty of Engineering ]
Please send comments or questions about this page to: <
webmaster@eng.tau.ac.il >
Last modified: March, 2010