(Conferences with papers published in proceedings are underlined; This list does not include special presentations and seminars)
  1. J. Halpern and O. Maimon, "Equity Measures in Locational Decisions", ORSA/TIMS Joint National Meeting, New Orleans, LA, April 1979 (Invited).
  2. O. Maimon, "Combustion Products Spread in Residential Fires", The 14th Israeli Mechanical Engineering Conference, Haifa, July 1980.
  3. J. Halpern and O. Maimon, "The Center Problem - A Survey", Euro IV - Operations Research Conference, Cambridge, England, July 1980 (Invited).
  4. O. Maimon and J. Halpern, "Advances in Equity Measures in Locational Decisions", Euro IV - Operations Research Conference, Cambridge, England, July 1980.
  5. O. Maimon and J. Halpern, "Accord and Conflict among Several Objectives in Locational Decisions on Tree Network", Proceedings of the Second International Symposium on Locational Decisions (ISOLDE - 11), Copenhagen, Denmark, June 1981.
  6. O. Maimon, "Microcomputer Communication for Computer Integrated Manufacturing Systems", University Robotic Seminar, Cincinnati Milacron, Cincinnati, OH, May 1982.
  7. O. Maimon and S.Y. Nof, "Analysis of a Robotic Assembly Cell", CIDMAC Review Conference, Purdue University, W. Lafayette, IN, February 1983.
  8. O. Maimon and S.Y. Nof, "Activity Controller for a Multiple Robot Operation", ORSA/TIMS Joint National Meeting, Chicago, IL, April 1983 (Invited).
  9. O. Maimon and S.Y. Nof, "Planning and Control of a Multiple Robot Cell", The 17th Israeli Mechanical Engineering Conference, Tel Aviv, July 1983 (Invited). Appeared in Hebrew: Handassah Veadrichalut, October 1984.
  10. S.Y. Nof, R.G. Wilhelm, and O. Maimon, "Recovery Planning in Robot Control", ORSA/TIMS Joint National Meeting, Orlando, FL, November 1983.
  11. O. Maimon and S.Y. Nof, "Activity Controller for a Multiple Robot Assembly Cell", ASME Winter Annual Meeting, Boston, MA, November 1983.
  12. O. Maimon, "The Lorenz Measure in Locational Decisions on Trees", Proceedings of the third International Symposium on Locational Decisions (ISOLDE - 111), Boston, MA, June 1984.
  13. O. Maimon and S.Y. Nof, "Analysis and Control of Flexible Multi-Robot Operations", Proceedings of the Fall IIE Conference, Atlanta, GA, October 1984.
  14. O. Maimon and T.C. John, "Scheduling of Dynamic Computations for a Robot Controlled by Multiple Microprocessors", Proceedings of the CAD/CAM, Robotics and Automation International Conference, sponsored by ASME, IBM, and the University of Arizona, Tucson, AZ, February 1985.
  15. O. Maimon, "A Multi-Robot Control Experimental System with Random Parts Arrival", Proceedings of the Second IEEE International Conference on Robotics and Automation, St. Louis, MO, March 1985.
  16. O. Maimon and E.L.Fisher, "Analysis of Robotics Technology Alternatives", Proceedings of the Spring II Conference, Los Angeles, CA, May 1985.
  17. T.C. John and O. Maimon, "A Class of Scheduling Problems for FMS and Distributed Robot Controllers", ORSA/TIMS Joint National Meeting, Boston, MA, May 1985.
  18. O. Maimon, R. Akella, and S. B. Gershwin, "Approximating Value Functions Parameters for Short-term Scheduling of FMS", ORSA/TIMS Joint National Meeting, Boston, MA, May 1985 (Invited).
  19. O. Berman and O. Maimon, "Tactical Cooperation among Flexible Manufacturing Systems", The 12th International Symposium on Mathematical Programming", MIT, Boston, MA, August 1985.
  20. O. Maimon, "Optimal Robot Route Planning", The 12th International Symposium on Mathematical Programming, MIT, Boston, MA, August 1985 (Invited).
  21. O. Maimon, "Real-time FMS Operational Control", Proceedings of the CASA/SME Autofact 85 Conference, Detroit, MI, November 1985.
  22. O. Maimon, W. Kranz, and S. B. Gershwin, "Real-time FMS Scheduling with Repair Station Consideration", ORSA/TIMS Joint National Meeting, Atlanta, GA, November 1985 (Invited).
  23. O. Berman and O. Maimon, "Cooperation among Flexible Manufacturing Systems", Proceedings of the 24th IEEE Conference on Decision and Control, Orlando, FL, December 1985.
  24. O. Maimon, "Advances in Real-time Operational Control of FMS", Symposium on Real-time Optimization in Automated Manufacturing Facilities", NBS, Washington D.C., January 1986.
  25. Y.F. Choong and O. Maimon, "On Dynamic Routing in FMS", Proceedings of the Third IEEE International Conference on Robotics and Automation, San Francisco, CA, April 1986.
  26. O. Maimon and E.L. Fisher, "Integrating Artificial Intelligence and Mathematical Programming Methods for Robotic Cell Analysis", ORSA/TIMS Joint National Meeting, Los Angeles, CA, April 1986 (Invited).
  27. O. Maimon and Y.F. Choong, "Dynamic Routing in Reentrant FMS", Proceedings of the Second ORSA/TIMS Conference on Flexible Manufacturing Systems: Operations Research Models and Applications. (Editors: R. Suri and K.E. Stecke), Elsevier Publishing Co., Ann Arbor, MI, August 1986.
  28. O. Maimon and E.L. Fisher, "Combining Integer and Rule Based Programming Techniques of Robotics Technology Selection", ORSA/TIMS Joint National Meeting, Miami, FL, October 1986 (Invited).
  29. O. Maimon and A. Sofer, "On Optimal Robot Route Planning", ORSA/TIMS Joint National Meeting, Miami, FL, October 1986 (Invited).
  30. O. Maimon and G. Tadmor, "Efficient Supervisors in Discrete Event Systems", Proceedings of the 1986 IEEE International Conference on Systems, Man, and Cybernetics, Atlanta, GA, October 1986 (Invited).
  31. O. Maimon, "Manufacturing Communication Protocols", in panel discussion, Symposium on Recent Advances in Manufacturing Systems: Design and Control of Production Networks, Boston University, January 1987 (Invited).
  32. O. Maimon and E. L. Fisher, "Object Oriented Cell Control", Proceedings of PROMAT Conference, Chicago, IL, February 1987 (Invited).
  33. O. Maimon and S.B. Gershwin, "Dynamic Scheduling and Routing for FMS that have Unreliable Machines", Proceedings of the Fourth IEEE International Conference on Robotics and Automation, Raleigh, NC, April 1987 (Invited).
  34. K.Y. Jo and O. Maimon, "Optimal Load Distribution in Parallel Queues with Application to an FMS", ORSA/TIMS Joint National Meeting, New Orleans, LA, April 1987 (Invited).
  35. R.K. Kincaid and O. Maimon, "The Vertex of Minimum Variance of 3-Cactus Graph", ORSA/TIMS Joint National Meeting, New Orleans, LA, April 1987.
  36. O. Maimon and G. Tadmor, "Theory of Direct Manufacturing System Control", The International Conference of the Manufacturing Science and Technology of the Future, MIT Cambridge, MA, June 1987 (Invited).
  37. O. Maimon and G. Tadmor, "Supervisory Mechanism for Combined Automated Production Systems: Constructive Algorithms", Proceedings of the American Control Conference (ACC), Minneapolis, MN, June 1987, (Invited).
  38. O. Maimon and R.K. Kincaid, "The Optimal Variance Measure Location on Triangular Graphs", Proceedings of the Fourth International Symposium on Locational Decisions (ISOLDE-IV), Namur, Belgium, June 1987.
  39. G. Tadmor and O. Maimon, "From System Constraints to Supervisors in Large Discrete Systems", Proceedings of the Conference on Mathematical Theory of Networks and Systems (MTNS), Phoenix, AZ, June 1987 (Invited).
  40. 0. T. Freed, O. Maimon, and E.M. Dar-El, "Grouped Set-Up in Printed Circuit Board Assembly Production", Proceedings of the ASME Conference on Computers in Engineering, New York, NY, August 1987 (Invited).
  41. S.Y. Nof, O. Maimon, and R.G. Wilhelm, "Experiments for Planning Error-Recovery Programs in Robotic Work", Proceedings of the ASME International Conference on Computers in Engineering, New York, NY, August 1987 (Invited). (Purdue University, School of Industrial Engineering Research Memorandum No. 87-2).
  42. R.K. Kincaid and O. Maimon, "Central Structure Location Problems", ORSA/TIMS Joint National Meeting, St. Louis, MO, October 1987 (Invited).
  43. O. Maimon, "An Object-Based Representation for a Manufacturing Cell Controller", ORSA/TIMS Joint National Meeting, St. Louis, MO, October 1987, (Invited).
  44. E.L. Fisher and O. Maimon, "Integer Rule Programming", ORSA/TIMS Joint National Meeting, St. Louis, MO, October 1987 (Invited).
  45. T. Freed, O. Maimon, and E.M. Dar-El, "Clustered Scheduling in Electronics Production", Proceedings of the Ninth Israeli convention on CAD/CAM and Robotics, Tel-Aviv, December 1987.
  46. O. Maimon, "A CIM System Which Controls a Hybrid Robotic/Manual electronic Assembly Line", The Ninth Israeli Convention on CAD/CAM and Robotics, Tel-Aviv, December 1987.
  47. O. Maimon, "Iconic Modeling and Control of Computerized Manufacturing Systems", American Control Conference, Atlanta, GA, December 1987 (Invited).
  48. T. Freed, O. Maimon, and E.M. Dar-El, "Proposed Scheduling Methods for PCB Assembly", Proceedings of the Fifth Israeli Conference of Industrial Engineering and Management, Beer Sheva, May 1988.
  49. A. Dayagi and O. Maimon, "Production Planning Algorithm which Include Nesting Considerations", Proceedings of the Fifth Israeli Conference of Industrial Engineering and Management, Beer Sheva, May 1988 (In Hebrew).
  50. T. Freed, E.M. Dar-El, and O. Maimon, "Proposed Scheduling Methods for Printed Circuit Board Assembly", The General Assembly of CIRP, Tokyo, Japan, July 1988.
  51. O. Maimon and A. Dayagi, "Nesting Planning Based on Production Priorities and Technological Efficiency", The Tenth Israeli Convention on CAD/CAM and Robotics, Tel-Aviv, December 1988.
  52. O. Maimon, "Shop Floor Control", The Tenth Israeli Convention on CAD/CAM and Robotics, Tel-Aviv, December 1988.
  53. R. Romano, O. Maimon, and M. Furst, "Neural Network Implementation for Assigning a Product to a Production Line", The International Joint Conference on Neural Networks (IJCN), Washington D.C., June 1989.
  54. D. Ben-Arieh and O. Maimon, "Multiple Robot Programming Using a Concurrent Logic Language", Proceedings of the International Conference on Production Research (ICPR), Loughborough, England, August 1989.
  55. D. Ben-Arieh and O. Maimon, "A Language Framework for Multiple Robots", Proceedings for the Fourth Israeli and International Conference on Robotics, and the Eleventh Israeli Convention on CAD/CAM, Jerusalem, December 1989.
  56. O. Maimon and M. Last, "Information-Efficient Control of Automated Manufacturing Systems", Proceedings of the 6th Israeli Conference on Industrial Engineering and Management, Tel-Aviv, May 1990.
  57. O. Maimon and A. Kapitanovsky, "From Natural Language Requests to Robot Activities - Toward Bridging the Gap", Proceedings of the 6th Israeli Conference of Industrial Engineering and Management, Tel-Aviv, May 1990.
  58. O. Maimon, A. Shtub, and M. Daskin, "A Branch and Backtrack Algorithm for Grouping Components in Printed Board Production", ORSIS Conference (Israeli ORSA), Naharia, May 1990.
  59. O. Maimon, "Augmenting Mathematical Programming Model to MRP to Achieve Finite Capacity Considerations", The Twelfth Israeli Convention on CAD/CAM and Robotics, Tel-Aviv, December 1990.
  60. O. Maimon and M. Last, "Information Efficient Control of Robotic Systems", Proceedings of the 2nd France-Israeli Symposium on Robotics, Saclay, France, April 1991.
  61. A. Shmilovitci and O. Maimon, "Estimating the Performance of Multi Processes in Distributed Processing System That is Controlled with Fixed Priorities", Proceedings of 17th Israeli IEEE Conference, Tel-Aviv, May 1991.
  62. A. Sat, D. Kothick, O. Maimon, and R. Romano, "Expert System for Intentional Power Cuts", Proceedings of the Fourth International Conference on Industrial Engineering Applications of Artificial Intelligence and Expert Systems, IEA/AIE-91, Hawaii, June 1991.
  63. A. Shtub and O. Maimon, "Automated Assembly of Printed Circuit Boards - Set-Up Time Reduction by Group Technology Approach", Proceedings of the 11th ICPR, Hefei, China, August 1991.
  64. O. Maimon and M. Last, "The Design of Information Efficient Robotic Sensors", Proceedings of the SPIE Symposium on Robotics, Boston, September 1991.
  65. A. Shmilovitci and O. Maimon, "Smart Card Technology for Distributed Control of FMS", Proceedings of the 7th Israeli Conference of Industrial Engineering and Management, Haifa, April 1992 (In Hebrew).
  66. D. Braha and O. Maimon, "A Proof of the Complexity of Design", Proceedings of the 7th Israeli Conference of Industrial Engineering and Management, Haifa, April 1992.
  67. R. Hirschprong and O. Maimon, "Vision and Tactile Sensing Fusion for Recognition of Parts", Proceedings of the 7th Israeli Conference of Industrial Engineering and Management, Haifa, April 1992 (In Hebrew).
  68. O. Maimon and R. Horowitz, “Distributed Production Control", The 7th Israeli Conference of Industrial Engineering and Management, Haifa, April 1992.
  69. A. Kapitanovsky and O. Maimon, "Conceptual Graph-Based Synthesis of Robotic Assembly Operations", Proceedings of the IEEE Robotics and Automation Conference, Nice, France, May 1992 (Invited).
  70. A. Shtub and O. Maimon, "Group Technology for PCB Assembly Process", ORSA/TIMS Joint National Meeting, Orlando, FL, May 1992.
  71. O. Maimon and R. Horowitz, "An Approach to Distributed Scheduling," Israel Association of Computer Aided Design and Production (ITIM) Conference, Tel-Aviv, June 1992 (Served as the Chairman of the Conference Program Committee).
  72. O. Maimon, "Theorems and Proofs of Distributed Scheduling Algorithms", Euro XII/TIMS XXXI Joint International Conference Operations Research/Management Science, Helsinki, Finland, July 1992 (Invited).
  73. A. Shmilovici and O. Maimon,”Data Tag Usage in Distributed Production Control and in Paperless Production”, Proceedings of the 13th Israeli Conference on Advanced Manufacturing Technology, Tel-Aviv, December 1992 (in Hebrew).
  74. S. Oliker, M.Furst, and O. Maimon,”Design Architecture and Training of Neural Networks with a Distributed Genetic Algorithm”, Proceedings of the International Conference of Neural Networks, Washington, 1993.
  75. O. Maimon, K. Kogan, and E. Levner,”Flowshop Scheduling of Robotic Cells with Task Dependent Transportation and Setup Effects”, National Meeting of the Operation Research Society of Israel (ORSIS), Nahariya, May 1993.
  76. E. Khmelnitsky, K. Kogan, and O. Maimon,”An Optimal Control Model for Production Scheduling with Continuous Setup”, National Meeting of the Operation Research Society of Israel (ORSIS), Nahariya, May 1993.
  77. O. Maimon and A. Kapitanovsky, “Synthesis and Analysis of Conceptual Graph Approach to Intelligent Robotic Assembly Automation”, Proceedings of the Symposium on Intelligent Process Control, ASME Winter Annual meeting, New Orleans, December 1993.
  78. O. Maimon, “From Robotic Systems to Mechatronics“, The 1st Mexican Conference on Mechatronics, Mexico City, Mexico, February 1994 (Invited)
  79. O. Maimon and R. Zuckerstein, “Scheduling Jobs with Sequence Dependent Setup on a Single Machine with a Magazine”, The 16th International Conference on Computers and Industrial Engineering, Japan, March 1994.
  80. K. Kogan, E. Khmelnitsky, and O. Maimon,”Methods for Sequence Dependent Setup Scheduling in FMS”, ORSA/TIMS Joint National Meeting, Boston, April 1994.
  81. D. Braha and O. Maimon, ”On the Design Process”, ORSA/TIMS Joint National Meeting, Boston, April 1994.
  82. D. Braha and O. Maimon, “Modeling the Design Process”, Proceedings of the 8th Israeli Conference of Industrial Engineering and Management, Beer Sheva, May 1994.
  83. A. Shmilovici and O. Maimon, “Using Fuzzy Logic Rules for the Control of Production Systems”, Proceedings of the 8th Israeli Conference of Industrial Engineering and Management, Beer Sheva, May 1994 (in Hebrew).
  84. O. Maimon and A. Shmilovici, “Bounded Near Optimal Control of FMS using Fuzzy Logic”, Proceedings of the Japan-USA Symposium on Flexible Automation, Kobe, Japan, July 1994, pp. 197-201.
  85. E. Khmelnitsky, K. Kogan, and O. Maimon,”A Modified Iterative Method for Optimal Flow Control in Flexible Manufacturing Systems”, Proceedings of the 3rd IEEE Conference on Control Applications, Glasgow, Scotland, August 1994.
  86. E. Khmelnitsky, K. Kogan, and O. Maimon,”Optimal Flow Control for Scheduling in Manufacturing Systems with Continuous Flow”, Proceedings of the 4th Rensselaer International Conference on Computer Integrated Manufacturing and Automation Technology, New York, October 1994.
  87. D. Braha and O. Maimon, “Dynamic Aspects of the Design Process”, Proceedings of the 14th Israeli Conference of the Society of Manufacturing Engineers, Tel Aviv, December 1994.
  88. A. Shmilovici and O. Maimon, “Fuzzy Systems Approximation by Frames - SISO Case”, Proceedings of 4th IEEE International Conference on Fuzzy Systems (FUZZ-IEEE/IFES’95), Yokohama, Japan, March 1995, pp. 2057-2061.
  89. A.V. Huffaker and O. Maimon, “Maintaining a Consistent Configuration in a Constraint Based mechanical Design System”, Proceedings of the ASME Annual Winter Meeting, RSAFP Symposium, San Fransisco, March 1995.
  90. O. Maimon and A. Shmilovici, “Fuzzy Systems Approximation by Fuzzy Spline Wavelets”, Proceedings of the International Society for optical SPIE Conference, Orlando, Florida, April 1995, pp. 1000-1011.
  91. K. Kogan, E. Khmelnitsky, A. Shtub, and O. Maimon, ”Optimal Control-Based Methods for Scheduling Dynamic Production systems”, The 13th European Conference of Operations Research, Jerusalem, July 1995.
  92. K. Kogan, E. Khmelnitsky, A. Shtub, and O. Maimon, ”An Optimal Flow Control Approach for Setup Scheduling”, Proceedings of the 1st International Workshop on Intelligent Scheduling of Robots and Flexible Manufacturing Systems, Tel-Aviv, July 1995.
  93. A. Shmilovici and O. Maimon, "Near Optimal Control of FMS Using Fuzzy Logic", Proceedings of the Society of Manufacturing Engineering (SME) - The 15th Israeli Conference on Advanced Manufacturing Technologies in Engineering Management and Manufacturing, Tel Aviv, July 1995.
  94. K. Kogan, E. Khmelnitsky, A. Shtub, and O. Maimon,”An Optimal Control Scheduling Method for Setup Localization”, Proceedings of the 13th International Conference on Production Research, Jerusalem, August 1995.
  95. A. Shmilovitci and O. Maimon,” Multiresolution Analysis of Flexible Manufacturing Systems", Proceedings of the 13th International Conference on Production Research, Jerusalem, August 1995.
  96. R. Horowitz and O. Maimon,”Sufficient Conditions for Creative Engineering Design”, Proceedings of the 13th International Conference on Production Research, Jerusalem, August 1995.
  97. A. Shmilovici and O. Maimon, "Time Series Prediction with Fuzzy Spline Wavelets", Proceedings of Intelligent Data Analysis (IDA-95) Symposium of the International Conference on Systems Research, Informatics and Cybernetics, PBaden-Baden, Germany, August 1995.
  98. A. Shmilovici and O. Maimon, "Fuzzy Systems Approximation by Wavelet Packets - SISO Case", Proceedings of the Joint Conference of the Third International Symposium on Uncertainty Modeling and Analysis (ISUMA'95) and the Annual Conference of the North American Fuzzy Information Processing Society (NAFIPS'95), College Park, MD, September 1995.
  99. A. Shmilovici and O. Maimon, "The Fuzzy Rule Base Solution of Differential Equations", Proceedings of the Fourth Annual Conference on Fuzzy Theory and Technology and the Second Annual Joint Conference on Information Sciences (JCIS’95), PNorth Carolina, September 1995, pp. 534-537.
  100. O. Maimon, D. Braha, and I. Ben-Gal, “Probabilistic Methodology for Designing a Manufacturing System”, INFORMS Winter Conference, New Orleans, October 1995.
  101. O. Maimon, A. Shtub, and D. Braha “The Assignment of Workload to a Set of Similar Automatic PCB Assembly Machines”, INFORMS Spring Conference, Washington D.C., May 1996.
  102. A. Shmilovici and O. Maimon, “Multiresolution Analysis of Complex Systems”, The 9th Conference of the European Consortium for Mathematics in Industry (ECMI 96), Lyngby, Copenhagen, Denmark, June 1996.
  103. A. Shmilovici, H. Shore, and O. Maimon, "Statistical Like Validation of Fuzzy Logic Models Using Distributional Fitting", Proceedings of the 6th International Conference on Information Processing and Management of Uncertainty in Knowledge Based Systems (IMPU'96), Granada, Spain, July 1996, pp. 628-634.
  104. A.V. Huffaker and O. Maimon, “Design Consistency in Iterative Design Systems”, Proceedings of the Japan-USA Symposium on Flexible Manufacturing Systems, Boston, MA, July 1996.
  105. O. Maimon and E. Khmelnitsky, “Scheduling Production Flow in a Cell with Fixture Inspection”, Proceedings of the Japan-USA Symposium on Flexible Manufacturing Systems, Boston, MA, July 1996.
  106. A. Shmilovici and O. Maimon, “Best Fuzzy Rule Selection with Orthogonal Matching Pursuit”, Proceedings of the Fourth Congress on Intelligent Techniques and Soft Computing (EUFIT’96), Aachen, Germany, September 1996, pp. 592-596.
  107. A. Shmilovici and O. Maimon, “Fuzzy System Identification with Orthogonal Matching Pursuit”, roceedings of the 5th IEEE International Conference on Fuzzy Systems (FUZZ-IEEE’96),P New Orleans, LA, September 1996, pp. 2059-2064.
  108. A. Shmilovici and O. Maimon, “On-line Identification of Nonlinear Systems using Adaptive Matching Pursuit”, Proceedings of the 19th Convention of Electrical and Electronics Engineers in Israel, Jerusalem, November 1996.
  109. M. Last and O. Maimon, “Information Theoretic Approach to Data Reliability”, Annual Conference of the Operation Research Society of Israel, Jerusalem, May 1997.
  110. R. Horowitz and O. Maimon, “SIT - A Method for Creative Problem Solving in Technology”, The 7th International Conference on Thinking, Singapore, June 1997.
  111. I. Ben-Gal, O. Maimon, and D. Braha, “Sequential Experimentation Methodology of Factorial Systems”, The 9th INFORMS Applied Probability Conference, Boston, MA, June 1997.
  112. O. Maimon and E. Khmelnitsky, “A Computational Model for Stochastic Scheduling of Flexible Manufacturing Systems with Setups”, The 9th INFORMS Applied Probability Conference, Boston, MA, June 1997.
  113. A. Shmilovici and O. Maimon, “Systems Identification with Fuzzy Spline Wavelets”, Proceedings of the 6th International Conference on Fuzzy Systems, FUZZ-IEEE’97, Barcelona, Spain, July 1997, pp. 299-304.
  114. R. Horowitz and O. Maimon, “Creative Design Methodology and the SIT Method”, Proceedings of DETC’97: 1997 ASME Design Engineering Technical Conference, Sacramento, September 1997. (This paper won the Xerox Best Paper Award)
  115. R. Horowitz and O. Maimon, “Creative Identification of Customer Needs: a Pre- QFD method”, The 3rd International Symposiums on QFD, Linkoping, Sweden, October 1997.
  116. M. Last and O. Maimon, “An Information Theoretic Approach to Data Mining”, The Fifth International Symposium on AI and Mathematics, Florida, January 1998.
  117. M. Last and O. Maimon, “Knowledge Discovery in Databases”, Bar-Ilan workshop on KDD, Tel Aviv, May 1998.
  118. O. Maimon, A. Kandel, and M. Last, “Information-Theoretic Fuzzy Approach to Knowledge Discovery in Databases”, Proceedings of The Third On Line World Conference on Soft Computing in Engineering, Design and Manufacturing (WSC3), June 1998.
  119. M. Last and O. Maimon, “Automated Knowledge Discovery in ERP Databases”, Proceedings of the 10th Israeli Conference of Industrial Engineering and Management, Haifa, June 1998.
  120. O. Maimon, “The New Generation of ERP”, Proceedings of the 10th Israeli Conference of Industrial Engineering and Management, Haifa, June 1998 (Invited Plenary Lecture).
  121. A. Herbon, E. Khmelnitsky, and O. Maimon “Measuring the Effective Horizon Length in Real-Time Dynamic Problems – Theoretical Discussion”, Proceedings of The National Meeting of Operations Research Society of Israel (ORSIS), Dead-Sea, May 1999.
  122. O. Maimon and B. Chizi, “Information Technology as a Driver for Productivity”, Proceedings of the 9th International Conference on Productivity & Quality Research, Jerusalem, 1999, pp. 308-314.
  123. A. Herbon, E. Khmelnitsky, and O. Maimon “Off-Line Stochastic Modeling for Dynamic Production Systems”, IEE Annual Conference, Dallas, Texas, May 1999.
  124. O. Maimon and B. Chizi, “Clustering Methods for Improving System Analysis and Design with Data Flow Diagrams and Object Oriented Analysis and Design”, Proceedings of the 11th Industrial Engineering and Management Conference, IE&M, Beer Sheva, May 2000, pp. 11-17.
  125. A. Blank, B. Chizi, O. Maimon, and Z. Zalevsky, “ Required Initial Inventory Estimation for Obtaning Desired steady state Availability”, Proceedings of the 11th Industrial Engineering and Management Conference, IE&M, Beer Sheva, May 2000, pp. 48-52.
  126. L. Rokach and O. Maimon, “Data Mining with Attribute Decomposition”, Proceedings of the 11th Industrial Engineering and Management Conference, IE&M, Beer Sheva, May 2000
  127. O. Maimon, “Conceptual Design methodology with Creative Engineering Process", The 2000 International CIRP Design Conference, Haifa, May 2000.
  128. M. Last, E. Minkov, and O. Maimon, “Improving Stability of Decision Tree Methods”, The Second Bar-Ilan Conference on Knowledge Discovery and Learning, Tel-Aviv, June 2000
  129. M. Last and O. Maimon, “Automated Dimensionality Reduction of Data Warehouses”, Proceedings of the 2nd International Workshop on Design and Management of Data Warehouse (DMDW'2000), (Editors: M. Jeusfeld, H. Shu, M. Staudt, G. Vossen), Stockholm, Sweden, June 2000. Link to web site
  130. M. Last, A. Kandel, and O. Maimon, E. Eberbach, “Anytime Algorithm for Feature Selection”, Proceedings of the Second International Conference on Rough Sets and Current Trends in Computing (RSCTC'2000), Lecture Notes in Artificial Intelligence, Springer-Verlag, 2000. Link to web site
  131. L. Rokach and O. Maimon, “Theory and Application of Attribute Decomposition”, Proceedings of the First IEEE International Conference on Data Mining, IEEE Computer Society Press, San Hose, November-December 2001, pp.473-480.
  132. B. Chizi and O. Maimon, “Information Technology as a Driver for Productivity”, Proceedings of the 9th International Conference on Productivity and Quality Research, Jerusalem, 2001, pp.308-314.
  133. L. Rokach and O. Maimon, “Introduction to Decomposition Methodology in Classification Models”, Haifa Winter Workshop on Computer Science and Statistics (CsStat 2001), Haifa, December 2001.
  134. O. Maimon and L. Rokach, “Improving Supervised Learning by Feature Decomposition”, Proceedings of the Second International Symposium on Foundations of Information and Knowledge Systems (FoIKS), Lecture Notes In Computer Science, Springer-Verlag, Germany, February 2002, pp. 178-196.
  135. B. Chizi, A. Shmilovici, and O. Maimon, “Dimension Reduction of High Dimensional Data Sets”, Proceedings of the 12th Israeli Conference of Industrial Engineering and Management, Tel Aviv, March 2002.
  136. L. Rokach and O. Maimon, “Decomposition Methodology in Data mining”, Proceedings of the 12th Israeli Conference of Industrial Engineering and Management, Tel Aviv, March 2002.
  137. H. Dahan and O. Maimon, “Active Data Mining Methodology”, Proceedings of the 12th Israeli Conference of Industrial Engineering and Management, Tel Aviv, March 2002.
  138. Chizi, L. Rokach, and O. Maimon, “Mining for Effectiveness of Marketing Campaign”, Proceedings of the 12th Israeli Conference of Industrial Engineering and Management, Tel Aviv, March 2002.
  139. G. Zeira, O. Maimon, M. Last, and L. Rokach, “Change Detection in Classification Models of Data Mining”, Proceedings of the 12th Israeli Conference of Industrial Engineering and Management, Tel Aviv, March 2002.
  140. O. Maimon, “Knowledge Discovery in Data - The Next Industrial Engineering Revolution”, The 12th Israeli Conference of Industrial Engineering and Management, Tel Aviv, March 2002 (Special Seminar Lecture).
  141. B. Chizi, E. Gur, Z. Zalevsky, and O. Maimon, “Using Clustering for Improving System Investigation”, Proceedings of the 12th Israeli Conference of Industrial Engineering and Management, Tel Aviv, March 2002.
  142. O. Maimon and L. Rokach, “Decomposition Methods in Data Mining”, The Annual ORSIS (Operation Research Society of Israel) Conference, Shfeim, Israel, May 2002.
  143. B. Chizi, O. Maimon, and A. Shmilovici, "Dimension Reduction of High Dimensional Data Sets" Proceedings of the Second Euro-International Symposium on Computational Intelligence, Kosice, Slovakia, June 16-19, 2002. Link (This paper won the best paper award of the conference)
  144. O. Maimon, L. Rokach, and S. Cohen, “Comparing Classification Models Using Expert Knowledge”, Proceedings of the 6th World Multiconference on Systemics, Cybernetics and Informatics, SCI 2002 Conference, Orlando, Fl, July 2002. Link
  145. O. Maimon, L. Rokach, and I. Lavi, “Space Decomposition in Data Mining- a clustering approach”, The Annual IEEE Conference in Israel, Tel Aviv, November 2002.
  146. O. Maimon and L. Rokach, “New Generalized Entropy Measure for Characterizing Mixed Datasets”, Proceedings of the 1st Israeli Research Conference of Industrial Engineering and Management, Tel Aviv, March 2003.
  147. O. Maimon and L. Rokach, "Data Mining for Improving Manufacturing's Quality: A feature set decomposition approach", Proceedings of the 9th International Conference on Manufacturing Excellence, Melbourne, October 2003.
  148. L. Rokach, O. Maimon, and I. Lavi, “Space Decomposition In Data Mining: A Clustering Approach”, Proceedings of the 14th International Symposium On Methodologies For Intelligent Systems, Maebashi, Japan, Lecture Notes in Computer Science, Springer-Verlag, 2003, pp. 24 – 31.
  149. O. Maimon, L. Rokach, Y. Naveh, and M. Averbuch, “Clinical Data-mart”, The Annual Conference of the Israel Association of Medical Information, Tel Aviv, 2003.
  150. L. Rokach and O. Maimon, "Data mining for improving the quality of manufacturing ", Proceedings of the 13th Israeli Conference of Industrial Engineering and Management, Tel Aviv, March 2004
  151. L. Rokach, O. Maimon, and O. Arad, “Improving Supervised Learning by Sample Decomposition”, Proceedings of the 13th Israeli Conference of Industrial Engineering and Management, Tel Aviv, March 2004.
  152. O. Maimon, L. Rokach, and I. Edel, “Parameter Tuning for Classification Algorithms in Data Mining Using Meta Learning”, Proceedings of the 13th Israeli Conference of Industrial Engineering and Management, Tel Aviv, March 2004.
  153. O. Maimon, L. Rokach, and A. Okon, "Efficiency Frontier Generation Methods for Classification Problems in Data Mining", Proceedings of the 13th Israeli Conference of Industrial Engineering and Management, Tel Aviv, March 2004.
  154. L. Rokach, M. Averbuch, and O. Maimon, "Information Retrieval System for Medical Narrative Reports", The 6th International Conference On Flexible Query Answering Systems, Lyon, France, Lecture Notes in Artificial Intelligence 3055, Springer-Verlag, 2004, pp. 217-228.
  155. O. Maimon, L. Rokach, M. Averbuch, E. Ezer, and J. Kannry, "Information Extraction System for Medical Narrative Reports", Workshop on Intelligent Data Analysis in Medicine and Pharmacology, Stanford University, Palo Alto, CA, USA, September 2004.
  156. M. Averbuch, T. Karson, B. Ben-Ami, O. Maimon, and L. Rokach, "Context-Sensitive Medical Information Retrieval", Proceedings of 11th World Congress on Medical Informatics (MEDINFO-2004), IOS Press, San Francisco, CA, September 2004, pp. 282-286.
  157. M. Averbuch, O. Maimon, L. Rokach, and E. Ezer, "Free-Text Information Retrieval System for a Rapid Enrollment of Patients into Clinical Trials", Annual Meeting of the American Society for Clinical Pharmacology and Therapeutics (ASCPT), Florida, March 2005. (Abstract in Clinical Pharmacology and Therapeutics, V. 77, No. 2 2005).
  158. S. Cohen, O. Maimon, and E. Khmelnitsky, “A Distributed Approach for Reinforcement-Learning: Master-Slave Q-learning”, Proceedings of the 2nd Israeli Research Conference of Industrial Engineering and Management, Tel Aviv, March 2005.
  159. L. Rokach and O Maimon, "Decomposition Methodology for Classification Tasks", Proceedings of the IEEE International Conference on Granular Computing, sponsored by The IEEE Computational Intelligence Society, Beijing, July 2005, IEEE Computer Society Press, ISBN: 0-7803-9017-2, pp. 636-641
  160. O. Maimon, "Knowledge Discovery from Indian Philosophies", Conference on Philosophy and Science - An exploratory approach to consciousness, Kolkata, India, January 2006.

    line

    Return to:
    [Oded Maimon's - Home Page | Department of Industrial Engineering | Faculty of Engineering ]

    line

    Please send comments or questions about this page to: <webmaster@eng.tau.ac.il >
    Last modified: Jan. 2006