Raymond L. Boxman
PUBLICATIONS.
Articles in Journals
1.
R.L. Boxman, “Interferometric Measurement of Electron and
Vapor Densities in a High-Current Vacuum Arc,” Journal of Applied Physics, Vol.
45, pp. 4835-484 6, 1974.
2.
R.L. Boxman, “Measurement of Anode Surface Temperature
During a High Current Vacuum Arc,” Journal of Applied Physics, Vol. 46, pp.
4701-4704, 1975.
3.
R.L. Boxman, “Magnetic Constriction Effects in High-Current
Vacuum Arcs Prior to the Release of Anode Vapor,” Journal of Applied Physics,
Vol. 48, pp. 2338-2345, 1977.
4.
R.L. Boxman, “High Current Vacuum Arc Column Motion on Rail
Electrodes,” Journal of Applied Physics, Vol. 48, pp. 1885-1890, 1977.
5.
R.L. Boxman, “Triggering Mechanisms in Triggered Vacuum
Gaps,” IEEE Trans. Electron Devices, Vol. ED-24, 122-128, 1977.
6.
R.L. Boxman, J.H. Harris, and A. Bless, “Time Dependence of
Anode Spot Formation Threshold Current in Vacuum Arcs,” IEEE Trans. Plasma
Science, Vol. PS-6, pp. 233-238, 1978.
7.
R.L. Boxman and M.L. Sloan, “A Scanning Technique for
Obtaining Linear Fringe Shift Readout from a High Resolution Interferometer,”
Applied Optics, Vol. 17, pp. 2794-2797, 1978.
8.
R.L. Boxman and D.J. Shlien, “Interferometric Technique for
Measuring the Refractive Index Variation of a Liquid with Temperature,” Review
of Scientific Instruments, Vol. 49, pp. 861-863, 1978.
9.
R.L. Boxman and D.J. Shlien, “Interferometric Measurement
Technique for the Temperature Field of Axisymmetric Buoyant Phenomena,” Applied
Optics, Vol. 17, pp. 2788-2793, 1978.
10.
D.J. Shlien
and R.L. Boxman, “Temperature Field Measurement of an Axisymmetric Laminar Plume,” Phys. Fluids, Vol. 22, pp.
631-634. 1979.
11.
D.J. Shlien
and R.L. Boxman, “Laminar Starting Plume Temperature Field Measurement,” Int.
J. Heat and Mass Transfer, Vol. 24, pp. 919-931, 1981.
12.
R.L. Boxman
and S. Goldsmith, “Excited State Densities in a MultiCathode-Spot Al Vacuum
Arc.,
13.
S.
Goldsmith and R.L. Boxman, “Excited State Densities in a MultiCathode-Spot Al
Vacuum Arc, II. Theoretical Approach” Journal of Applied Physics, Vol. 51, pp.
3657-3663, 1980.
14.
V.A. Finch,
R. Dmiel, R. Boxman, A. Shkolnik and C. Taylor, “Why Black Goats in Hot
Deserts? Effects of Coat Color on Heat Exchange of Wild and Domestic Goats,”
Physiol. Zool. Vol. 53, pp. 19-25, Jan 1980.
15.
R.L. Boxman
and S. Goldsmith, “The Interaction Between Plasma and Macroparticles in a
Multi-Cathode-Spot Vacuum Arc”, Journal of Applied Physics, Vol. 52, pp.
151-162, 1981.
16.
R.L.
Boxman,
17.
S.
Goldsmith, S. Shalev, and R.L. Boxman, “Excited State Densities in a
Multi-Cathode-Spot Cd Vacuum Arc,” Physica, Vol. 104C, pp. 107-115, 1981.
18.
19.
S.
Goldsmith and R.L. Boxman, “Coulomb Approximation Calculations of Transition
Probabilities in the Transition Array
in Cu II”, J. Phys. B:
Atom. Molec. Phys. Vol. 14, pp. 3031-3036, 1981.
20.
R. L.
Boxman and S. Goldsmith, “A Model of the Anode Region in a Uniform
Multi-Cathode-Spot Vacuum Arc”, Journal of Applied Physics, Vol. 54, pp.
592-602, 1983.
21.
S. Shalev,
S. Goldsmith, and R.L. Boxman, “Absorption Effects of the Cd II 4416 A Line in
a Cadmium Vacuum Arc Plasma”, Journal of Applied Physics, Vol. 53, pp.
6736-6741, 1982.
22.
F.T.
Warren, J.M. Wilson, J.E. Thompson, R.L. Boxman, and T. Sudarshan, “Vacuum
Switch Trigger Delay Characteristics”, IEEE Trans. Plasma Sci. (special issue
on Plasma Switching), PS-10, pp. 298-301, 1982.
23.
J.M.
Wilson, R.L. Boxman, and J.E. Thompson, “Breakdown Time of a Triggered Vacuum
and Low-Pressure Switch”, IEEE Trans. Electrical Insulation Vol. EI-18, pp.
238-242, 1983.
24.
R. L.
Boxman, S. Goldsmith, I. Izraeli, and
25.
S.
Goldsmith,
26.
S. Shalev,
S. Goldsmith and R.L. Boxman, “In-situ Determination of Macroparticles Velocity
in a Copper Vacuum Arc”, IEEE Trans. Plasma Sci., Vol. PS-11, pp. 146-151,
1983.
27.
I. Izraeli,
S. Goldsmith and R.L. Boxman, “The Influence of the Self Magnetic-Field on the
Steady State Current Distribution in an Axially Flowing Conducting Medium”,
IEEE Trans. Plasma Sci. Vol. PS-11, pp. 160-164, 1983.
28.
F.T.
Warren, R.L. Boxman, J.E. Thompson and T. Sudarshan, “Current Evolution in a
Pulsed Overstressed Radial Vacuum Gap”, IEEE Trans. Electrical Insulation, Vol.
EI-18, pp. 226-229, 1983.
29.
R. Lee, T.
Sudarshan, J.E. Thompson, G.R. Nagabhoshana and R.L. Boxman, “Predischarge
Current Measurement in Vacuum Gaps Bridged with Plexiglass Insulators”, IEEE
Trans. Electrical Insulation, Vol. EI-18, pp. 280-286, 1983.
30.
S.
Goldsmith, Y. Bresler and R.L. Boxman, “Spectroscopic Study of Excited-State
Densities in a Zn Vacuum-Arc Plasma”, Journal of Applied Physics, Vol. 54, pp.
5691-5697, 1983.
31.
32.
S. Shalev,
R.L. Boxman, S. Goldsmith, “Velocities & Emission Rates of Cathode Produced
Molybdenum Macroparticles in a Vacuum Arc”. Journal of Applied Physics, Vol.
58, pp. 2503-2507, 1985.
33.
I. Israeli,
A. Whitman, R.L. Boxman and S. Goldsmith, “Asymptotic Analysis of the Steady
State Current Flow in a Uniform Multi-Cathode-Spot Generated Vacuum Arc Plasma
Flow”. IEEE Trans. Plasma Science, Vol. PS-13, pp. 281-284, 1985.
34.
B. Gellert,
E. Schade and R.L. Boxman, “Time and Spatially Resolved Spectroscopy of the
35.
S. Shalev,
R.L. Boxman and S. Goldsmith, “Macroparticle Dynamics During Multi-Cathode-Spot
Vacuum Arcs”. IEEE Trans. Plasma Science, Vol. PS 14, pp. 59-62, 1986.
36.
R.L.
Boxman, S. Goldsmith, S. Shalev, H. Yaloz and
37.
G.
Disatnik, R.L. Boxman, S. Goldsmith, “Characteristics of macro particle
emission from a high current density multi-cathode-spot pulsed vacuum arc”,
IEEE Trans. Plasma Sci., Vol. PS-15, pp. 520-523, 1987.
38.
S.
Goldsmith, R.L. Boxman, E. Sapir, Y. Cohen, H. Yaloz, N. Brosh, “Distribution
of peak temperature and energy flux on the surface of the anode in a
multi-cathode-spot pulsed vacuum arc”, IEEE Trans.Plasma Sci., Vol. PS 15, pp.
510-514, 1987.
39.
I. Izraeli,
R.L. Boxman, S. Goldsmith, “The current distribution and the magnetic pressure
profile in a vacuum arc subjected to an axial magnetic field”, IEEE Trans.
Plasma Sci., Vol. PS-15, pp. 502-505, 1987.
40.
S.
Bababeygy, R.L. Boxman, S. Goldsmith, “Corrosion evaluation of very rapid
high-current vacuum arc coatings”, IEEE Trans. Plasma Sci., Vol. PS-15, pp.
599-602, 1987.
41.
R.L. Boxman
and S. Goldsmith, “Cathode-spot arc coatings: physics, deposition and heating
rates, and some examples”, Surface and Coatings Technology, Vol. 33, pp.
153-167, 1987.
42.
Y. Cohen,
R.L. Boxman and S. Goldsmith, “Angular distribution of ion current emerging from
an aperture anode in a vacuum arc”, IEEE Trans. Plasma Sci., Vol. PS-17, pp.
713-716, 1989.
43.
R.L. Boxman
and S. Goldsmith, “A model for a uniform steady-state vacuum arc with a hot
anode”, IEEE Trans. Plasma Sci., Vol. PS-17, pp. 661-665, 1989.
44.
R.L. Boxman
and S. Goldsmith, “Principles and applications of vacuum arc coatings”, IEEE
Trans. Plasma Sci., Vol. PS-17, pp. 705-712,1989.
45.
R.
Rosenbaum, M. Ben-Shlomo, S. Goldsmith and R.L. Boxman, “Low temperature
electronic transport properties of W, Mo, Ta and Zr thin films”, Phys.
Rev. B . Vol. 39, pp.
10009-10019, 1989.
46.
U. Ghera,
R.L. Boxman,
47.
R.L. Boxman
and S. Goldsmith, “Momentum interchange between cathode spot plasma jets and
background gases and vapors and its implication on vacuum arc anode spot
development”, IEEE Trans. Plasma Sci. Vol. PS-18, pp. 231-236, 1990.
49.
R.L. Boxman
and S. Goldsmith, “Macroparticle Contamination in Cathodic Arc Coatings:
Generation, Transport, and Control”, Surface and Coatings Technology, Vol. 52, pp. 39-50, 1992.
50.
A.
Ben-Shalom, R.L. Boxman and S. Goldsmith, “Ion current collected at various
distances and argon background pressures in a copper vacuum arc”, IEEE Trans.
Plasma Sci. Vol. 21, pp. 435-439, 1993.
51.
N.
Parkansky, I. Beilis, R.L. Boxman and S. Goldsmith, “Electrode erosion during
pulsed arcing”, IEEE Trans. Plasma Sci. Vol. 21, pp. 458-462, 1993.
52.
R.L. Boxman
and S. Goldsmith, “Mass and surface conductivity gain on polymer surfaces
metalized using vacuum arc deposition”, Thin Solid Films, Vol. 236, pp.
341-346, 1993.
53.
A.
Ben-Shalom, L. Kaplan, R.L. Boxman, M. Nathan and S. Goldsmith, “SnO2 transparent conductor films produced by a filtered vacuum arc”, Thin Solid
Films, Vol. 236, pp. 20-26, 1993.
54.
55.
V.N.
Zhitomirsky, R.L. Boxman, S. Goldsmith, “Influence of an external magnetic
field on cathode spot motion and coating deposition using filtered arc
evaporation”, Surface and Coatings Technology, Vol. 68/69, pp. 146-151, 1994.
56.
L. Kaplan,
A. Ben-Shalom, R.L. Boxman, S. Goldsmith, U. Rosenberg, M. Nathan, “Annealing
and Sb-Doping of Sn-0 films produced by filtered vacuum arc deposition:
structure and electro-optical properties”, Thin Solid Films, Vol. 253, pp. 1-8,
1994.
57.
D. Arbilly,
R.L. Boxman, S. Goldsmith, A. Rothwarf, L. Kaplan, “Amorphous Si thin films
prepared by vacuum arc deposition”, Thin Solid Films, Vol. 253, pp. 62-66,
1994.
58.
N.
Parkansky, R.L. Boxman, S. Goldsmith, Y. Rosenberg, A. Ben-Shalom, L. Kaplan,
D. Arbilly, “Improvement of thin film semi-conductor conductivities using a
transverse current during deposition”, Surface and Coatings Technology, Vol.
68/69, pp. 320-324, 1994.
59.
K.
Pourrezaei, I. Shevets, M. Delaurentis, R.L. Boxman, R.B. Beard, N. Croitoru,
M. Mukhtar, D.A. Logan, R. Rastogi, “Development of antimicrobial and
antithrombogenic coatings for inside and outside of medical catheters”, Surface
and Coatings Technol., Vol. 68/69, pp. 669-674, 1994.
60.
R.L.
Boxman, S. Goldsmith, A. Ben-Shalom, L. Kaplan, D. Arbilly, E. Gidalevich, V.N.
Zhitomirsky, A. Ishaya, M. Keidar, I. Beilis, “Filtered vacuum arc deposition
of semi-conductor thin films”, IEEE Trans. Plasma Sci., Vol. 23, pp. 939-944,
1995.
61.
M. Keidar,
I. Beilis, R.L. Boxman and S. Goldsmith, “Non-stationary macroparticle charging
in an arc plasma jet”, IEEE Trans. Plasma Sci., Vol. 23, pp. 902-908, 1995.
62.
H.
Rosenthal, I. Beilis, S. Goldsmith and R.L. Boxman, “Heat fluxes during the
development of hot anode vacuum arc”, J. Phys. D.: Applied Physics, Vol. 28,
pp. 353-363, 1995.
63.
V.N.
Zhitomirsky, R.L. Boxman and S. Goldsmith, “Unstable arc operation and cathode
spot motion in a magnetically filtered vacuum arc deposition system”, J. Vac. Sci. Technol. A, Vol. 13, pp.
2233-2240, 1995.
64.
L. Kaplan,
V.N. Zhitomirsky, R.L. Boxman and S. Goldsmith, “Arc behavior during filtered
vacuum arc deposition of Sn-O thin films”, Surface and Coatings Technology,
Vol. 76/77, pp. 181-189, 1995
65.
V.N.
Zhitomirsky, L. Kaplan, R.L. Boxman and S. Goldsmith, “Ion current distribution
in a filtered vacuum arc deposition system”, Surface and Coatings Technology,
Vol. 76/77, pp. 190-196, 1995.
66.
N.
Parkansky, R. Rosenbaum, Y. Rosenberg, R.L. Boxman and S. Goldsmith, “Influence
of transverse current during In-O vapor deposition”, Surface and Coatings
Technology, Vol. 76/77, pp. 197-201, 1995.
67.
N.
Parkansky, R.L. Boxman, S. Goldsmith and Y. Rosenberg, “Corrosion resistance of
Zn-coatings produced by pulsed-air arc deposition”, Surface and Coatings
Technology, Vol. 76/77, pp. 352-357, 1995.
68.
M. Keidar,
I. Beilis, R.L. Boxman and S. Goldsmith, “Transport of macroparticles in
magnetized plasma ducts”, IEEE Trans. Plasma Sci., Vol. 24, pp. 226-234, 1996.
69.
U. Kinrot,
S. Goldsmith and R.L. Boxman, “Monochromatic imaging of cathodic arc plasma”,
accepted for publication in IEEE Trans. Plasma Sci., (special issue on plasma
imaging) Vol. 24, pp. 71-72, 1996.
70.
M. Keidar,
I. Beilis, R.L. Boxman and S. Goldsmith, “2D expansion of the low-density
interelectrode vacuum arc plasma jet in an axial magnetic field”, J. Phys. D:
Appl. Phys, Vol. 29, pp. 1973-1983, 1996.
71.
M.
DeLaurentis, R.L. Boxman, K. Pourrezaei, I. Shvets, R. Beard and M. Muhktar,
“Reduction of intravascular catheter
infection using Ag and Ag/Pt coatings”, accepted for publication in
J. Infectious Disease.
72.
B.
Alterkop, E. Gidalevich, S. Goldsmith and R.L. Boxman, “Vacuum arc plasma jet
propagation in a toroidal duct”, J. Appl. Phys., Vol. 79, pp. 6791-6802, 1996.
73.
R.L.
Boxman, S. Goldsmith, V.N. Zhitomirsky, B. Alterkop,
74.
N. Parkansky,
B. Alterkop, R. Rosenbaum, R.L. Boxman and S. Goldsmith, “The effect of
post-deposition transverse current injection on amorphous indium oxide film
conductivity”, Thin Solid Films, Vol. 333, pp 150-156, 1998.
75.
M. Keidar,
I. Beilis, R.L. Boxman and S. Goldsmith, “Macroparticle interaction with a
substrate in cathodic vacuum arc deposition”, Surf. Coat. Technol.
Vol. 86-87, pp. 415-420, 1996.
76.
V.N.
Zhitomirsky, U. Kinrot, B. Alterkop, R.L. Boxman and S. Goldsmith, “Influence
of gas pressure on the ion current distribution in a filtered vacuum arc
deposition system”, Surf. Coat. Technol.Vol. 86-87, pp. 263-270, 1996.
77.
L. Kaplan,
78.
H.
Rosenthal, I. Beilis, S. Goldsmith, and R.L. Boxman, “A spectroscopic
investigation of the development of a hot-anode vacuum arc”, J. Phys. D.: Appl.
Phys. Vol. 29, pp. 1245-1259, 1996.
79.
B.
Alterkop, V.N. Zhitomirsky, S. Goldsmith, and R.L. Boxman, "Propagation of
vacuum arc plasma beam in a toroidal filter", IEEE Trans. Plasma Sci., Vol.
24, pp 1371-1377, 1996.
80.
B. Alterkop, N. Parkansky, R.L. Boxman, S. Goldsmith. "Influence of A Parallel
Electric Field on The Conductivity of A Growing Indium Oxide Film”, Thin
Solid Films Vol. 290-291, pp. 10-12, 1996.
81.
B.
Alterkop, E. Gidalevich, S. Goldsmith and R.L. Boxman. "Numerical
calculation of plasma beam propagation in a toroidal duct with magnetized
electrons and unmagnetized ions" J. Physics D: Applied Physics Vol.
29, pp. 1-7, 1996.
82.
83.
M. Keidar,
I. Beilis, R.L. Boxman, and S. Goldsmith, “Voltage of the vacuum arc with a
ring anode in an axial magnetic field”, IEEE Trans. Plasma Sci., Vol. 25,
pp. 580-585, Aug. 1997.
84.
R.L.
Boxman, S. Goldsmith, and A. Greenwood, “Twenty-five years of progress in
vacuum arc research and utilization”, IEEE Trans. Plasma Sci., Vol. 25,
pp. 1174-1186, Dec. 1997.
85.
M. Keidar,
I. Beilis, R. Aharonov, D. Arbilly, R.L. Boxman, S. Goldsmith, “Macroparticle
distribution in a quarter-torus plasma duct of a filtered vacuum arc deposition
system”, J. Phys. D: Appl. Phys. Vol. 30, pp. 2972-2978, 1997.
86.
N.
Parkansky, B. Alterkop, W. Schuster, R.L. Boxman, and S. Goldsmith “Vacuum arc
deposition of Ti-films with transverse current injection”, J. Appl. Phys. Vol.
82, pp. 4062-66, 1997.
87.
I.
Grimberg, V.N. Zhitomirsky, N. Parkansky, A. Matthews,
A. Wilson, R.L. Boxman, B.Z. Weiss, and S. Goldsmith,
"Structure and Tribological Properties of Thin Vacuum Arc Coatings on
Polysulfone", Surf. Coat. Technol. Vol. 94/95, pp. 213-219, 1997.
88.
V.N.
Zhitomirsky,
89.
V.N.
Zhitomirsky, I. Grimberg, I. Rapoport, N.A. Travitsky, R.L. Boxman,
S. Goldsmith, A Raihel, I. Lapsker, and B.Z. Weiss,
“Structure and Mechanical Properties of Vacuum Arc Deposited NbN Coatings”, Thin
Solid Films Vol. 326, pp 134-142, 1998.
90.
I.I. Beilis,
M. Keidar, R.L. Boxman, S. Goldsmith, “Nonequilibrium Macroparticle Charging in
Low-Density Discharge Plasmas”, IEEE Trans. Plasma Sci., Vol. 25, pp. 346-352,
1997.
91.
V.N.
Zhitomirsky, R.L. Boxman and S. Goldsmith, " Ion current distribution in a
toroidal duct of a filtered vacuum arc deposition system", IEEE Trans.
Plasma Sci., Vol. 25, No 5, pp. 665-669, 1997.
92.
I. Beilis,
M. Keidar, R.L. Boxman, and S. Goldsmith, “Theoretical study of plasma
expansion in a magnetic field in a disc anode vacuum arc”, J. Appl. Phys, Vol.
83, pp. 709-717, 1998.
93.
94.
I.I.
Beilis, M. Keidar, R.L. Boxman and S. Goldsmith, “Macroparticle
separation and plasma collimation in positively biased ducts in filtered vacuum
arc deposition systems”, J. Appl. Phys., Vol. 85, pp.
1358-1365, 1999.
95.
I.
Grimberg, V.N. Zhitomirsky, R.L. Boxman, S Goldsmith, and
B.Z. Weiss, "Multicomponent Ti-Zr-N and Ti-Nb-N coatings deposited by
vacuum arc", Surf. Coat. Technol. Vol. 108-109, pp. 154-159,
1998.
96.
V.N. Zhitomirsky,
97.
N.
Parkansky, I. Beilis, L. Rapoport, R.L. Boxman, S. Goldsmith, and Y. Rosenberg,
“Electrode erosion and coating properties in pulsed air arc deposition of
WC-based alloys”, Surface and Coatings Technology, Vol. 105, pp. 130-134, 1998.
98.
B.
Alterkop,
99.
L.
Rapoport, A. Rayhel, I. Lapsker, N. Parkansky, R.L. Boxman, S. Goldsmith, “The
effect of electricity on the mechanical properties of WC - Co alloy”, J.
Mechan, Behav. of Materials, Vol. 9 pp. 267-276, 1998.
100.
N. Parkansky,
101.
N. Parkansky, B. Alterkop, S.
Goldsmith, R.L. Boxman, Yu.
102.
103.
I.I.
Beilis, M. Keidar, R.L. Boxman, and S. Goldsmith, “Effect of macroparticle
separation in positively biased ducts in the filtered vacuum arc deposition
systems”, Surface and Coatings Technology, Vol. 108-109, pp.148-153, 1998.
104.
R Ben-Ami,
V N Zhitomirsky, R L Boxman and S Goldsmith, "Plasma distribution in a
triple-cathode vacuum arc deposition apparatus" Plasma Sources Sci.
Technol., 8, No 3 (1999), pp.355-362.
105.
V.N. Zhitomirsky, I. Grimberg, L. Rapoport,
N.A. Travitzky, R.L. Boxman, S. Goldsmith and B.Z. Weiss, "Vacuum arc
deposition of TiN, NbN and TiN/NbN multilayer coatings", Surface and
Coatings Technology, Vol. 120-121, pp. 2199-225, 1999.
106.
V.N.
Zhitomirsky, I. Grimberg, M.C. Joseph, R.L. Boxman, A. Matthews and B.Z. Weiss,
"Vacuum arc deposition of conductive wear resistant coatings on polymer
substrates", Surface and Coatings Technology, Vol. 120-121, pp. 373-377,
1999.
107.
R.L.
Boxman, V.N. Zhitomirsky, I. Grimberg, L. Rapoport, S.Goldsmith,
and B.Z. Weiss, “Structure and hardness of vacuum arc deposited
multi-component nitride coatings of Ti, Zr and Nb”, Surface and Coatings
Technology, Vol. 125, pp. 257-262, 2000.
108.
I.I. Beilis,
M. Keidar, R.L. Boxman, S. Goldsmith, J. Heberlein, and
E. Pfender, "Radial plasma flow in a hot anode vacuum arc", J.
Appl. Phys., Vol. 86, pp. 114-119, 1999.
109.
N. Parkansky,
B. Alterkop, S. Goldsmith, R.L. Boxman, Yu Rosenberg, and Z. Barkay, "The
effect of an electric field on the high temperature oxidation of copper in
air", Surface and Coatings Technology, Vol. 120-121, pp. 668-671, 1999.
110.
N.
Parkansky, B. Alterkop, S. Goldsmith, and R.L. Boxman, "The effect of
applying an electric field during air annealing on the resistance of Ti
films", J. Phys. D: Appl. Phys. Vol. 32, pp. 1503-5, 1999.
111.
E.
Gidalevich, S. Goldsmith, R.L. Boxman, “Shock front formation by two isotropic
supersonic plasma jets”, IEEE Transactions on Plasma Science, Vol. 27,
No. 4, 1045-1048, 1999.
112.
E.
Gidalevich, S. Goldsmith, R.L. Boxman, Interaction of two dissimilar plasma
jets, IEEE Transaction on Plasma Science, 27, No. 4, 1164-1168, 1999.
113.
. I. Beilis,
M. Keidar, R. L. Boxman, and S. Goldsmith, “Plasma Expansion and Current Flow
in a Vacuum Arc with a Small Anode”, IEEE Trans. Plasma Sci., Vol.27, N4, 1999,
(pp.872-876).
114.
115.
V. N.
Zhitomirsky, I. Grimberg, L. Rapoport, R. L. Boxman, N. A. Travitzky, S.
Goldsmith and B.Z. Weiss "Bias voltage and incidence angle effects on
the structure and properties of vacuum arc deposited TiN coatings",
Surface Coat.
Technol, Vol. 133-134 (2000), p.p. 114-120.
116.
I.I.
Beilis, M. Keidar, R.L. Boxman, and S. Goldsmith, “Interelectrode plasma
parameters and plasma deposition in a hot refractory anode vacuum arc”, Physics
of Plasmas 7, p.p. 3068-3076, 2000.
117.
I.I.
Beilis, R.L. Boxman, S. Goldsmith, and V.L. Paperny, “Ion acceleration in the
radially expanding plasma of the hot refractory anode vacuum arc”, Appl. Phys.
Lett. 75, pp. 2734-2736, 2000.
118.
I.I.
Beilis, R.L. Boxman, S. Goldsmith, and V.L. Paperny, “Radially expanding plasma
parameters in a hot refractory anode vacuum arc”, J. Appl. Phys. 88, p.p.
6224-6231, 2000.
119.
N.
Parkansky, B. Alterkop, S. Goldsmith, R.L. Boxman, H. Wulff, M. Quaas, and A.
Quade, “Nano‑organization of thin titanium films by an electric field
during vacuum arc deposition”, Thin Solid Films 377-378, pp. 507-511, 2000.
120.
N.
Parkansky, V.N. Zhitomrisky, B. Alterkop, S. Goldsmith, R.L. Boxman, Y.
Rosenberg, and Z. Barkay, “Effect of Transverse Current Injection During
Vacuum Arc Deposition of TiN”, Surf. Coat. Technol. Vol. 133-4, pp. 101-5,
2000.
121.
E.
Gidalevich, S. Goldsmith, R.L. Boxman, “Vacuum arc plasma jet interaction with
neutral ambient gas” J. Phys. D: Appl. Phys. Vol. 33, pp. 2598-2604, 2000.
122.
I.I. Beilis, S. Goldsmith, R.L. Boxman, “The
hot refractory anode vacuum arc: a new plasma source for metallic film
deposition”, Surface Coat.
Technol, Vol. 133-134 (2000), p.p. 114-120.
123.
L. Rapoport, N. Parkansky, I. Lapsker, A. Rayhel,
B. Alterkop, R.L. Boxman, S. Goldsmith, L. Burstain, “Effect of transverse
current injection on the tribological properties of WC cemented carbide”, Wear
Vol. 249, pp. 1-5, 2001.
124.
E.
Gidalevich, R.L. Boxman, S. Goldsmith “Applicability of the Hydrodynamic
Approximation to Current-Carrying Plasma Jets During Their Radial Expansion”,
IEEE Trans. Plasma Sci. Vol. 29, pp. 371-376, 2001.
125.
E.
Gidalevich, S. Goldsmith, R.L. Boxman, “Modelling of nonstationary vacuum arc
plasma jet interaction with a neutral background gas”, J. Appl. Phys. Vol. 90,
pp. 4355-4360, 2001.
126.
R.L.
Boxman, “Early History of Vacuum Arc Deposition”, IEEE Trans. Plasma Sci. Vol.
29, pp. 759-761, 2001.
127.
R.L.
Boxman, “Recent Developments in Vacuum Arc Deposition”, IEEE Trans. Plasma Sci.
Vol. 29, pp. 762-767, 2001.
128.
V.N. Zhitomirsky,
O. Zarchin, S.G. Wang, R.L. Boxman, and S. Goldsmith, “Ion Current Produced by
a Vacuum Arc Carbon Plasma Source”, IEEE Trans. Plasma Sci. Vol. 29,
pp. 776-780, 2001.
129.
E.
Gidalevich, S. Goldsmith, R.L. Boxman, “Supersonic Plasma Flow Near a Point
Charge”, J. Phys. D.: Applied Physics Vol. 35, pp. 199-204, 2002.
130.
I.I. Beilis
R.L. Boxman, S. Goldsmith, “ A hot refractory anode vacuum arc: Nonstationary
plasma model”, IEEE Trans. Plasma Sci. Vol 29, pp. 690-694, 2001.
131.
I.I.
Beilis, S. Goldsmith, R.L. Boxman, “Interelectrode plasma evolution in a hot
refractory anode vacuum arc: Theory and comparison with experiment”, Phys.
Plasmas, Vol. 9, pp. 3159-3170, 2002.
132.
133.
N. Parkansky, B. Alterkop, S. Goldsmith, R.L. Boxman,
Z. Barkay. Thermal
air oxidation of copper in an applied electric field. Surface and Coating
Technology 146-147 (2001) 13.
134.
E.
Gidalevich, S. Goldsmith, and R. L. Boxman, “Shock front formation at vacuum
arc anodes”, J. Appl. Physics, Vol. 92, No. 9, pp. 4891 – 4896,
2002.
135.
E.
Gidalevich, S. Goldsmith and R.L. Boxman, "Theoretical modelling of high
pressure argon arc radiation" Plasma Source Science and Technology, Vol.
11, No. 4, pp. 513-519, 2002.
136.
E.
Gidalevich, S. Goldsmith and R.L. Boxman, “The role of the electrical
polarization field in magnetic plasma confinement”, J. Phys. D: Appl. Phys.
Vol. 36, pp. 653-660, 2003.
137.
B. Alterkop, N. Parkansky, S. Goldsmith, and
R.L. Boxman, “Effect of air annealing on opto-electrical properties of
amorphous tin oxide films”, J. Phys. D: Appl. Phys. Vol. 36, pp. 552-558, 2003.
138.
O. Zarchin,
V.N. Zhitomirsky, S. Goldsmith, and R.L. Boxman, “Interaction of a vacuum arc
plasma beam with an obstacle positioned normal to the plasma flow”, J. Phys.
D.: Appl. Phys. Vol. 36, pp. 2262-8, 2003.
139.
O. Zarchin,
V.N. Zhitomirsky, R.L. Boxman, and S. Goldsmith, “Transport of a Vacuum-Arc
Produced Plasma Beam in a Magnetized Cylindrical Duct”, IEEE Trans. Plasma Sci.
Vol. 31, pp. 977-982, 2003.
140.
T. David,
S. Goldsmith, and R.L. Boxman, “Electro-Optical and Structural Properties of Thin ZnO Films Prepared by
Filtered Vacuum Arc Deposition” Thin Solid Films, 447-448C, pp.
61-67, 2003.
141.
142.
I.I.
Beilis, A. Nemirovsky, S. Goldsmith, R.L. Boxman, “Two-dimensional thermal
model of a refractory anode in a vacuum arc”, IEEE Trans. Plasma Sci., 31, No.
5, (2003), pp.958-962.
143.
I.I.
Beilis, A. Shashurin, D. Arbilly, S. Goldsmith, and R.L. Boxman “Copper film
deposition by a hot refractory anode vacuum arc”, Surface and Coating
Technology 177-178 (2004) pp. 233-7.
144.
145.
V.N.
Zhitomirsky, R.L. Boxman, S. Goldsmith, "Plasma distribution and SnO2 coating deposition using a rectangular filtered vacuum arc plasma source”, Surface
and Coating Technology 185 (2004) pp. 1-11.
146.
E.
Gidalevich, S. Goldsmith, and R. L. Boxman, "Comparative characteristics
of high-pressure arc radiation in argon, krypton and xenon atmospheres", Plasma
Source Sci. and Tech. 13, No. 3, pp. 454-460, 2004.
147.
N Parkansky, R L Boxman, B Alterkop,
148.
V.N.
Zhitomirsky, R.L. Boxman, S. Goldsmith, Influence of the aperture diameter on
plasma transport through the annular anode of a vacuum arc plasma deposition
system", Surface Coat. Technol., 188-189 (2004) pp. 220-227
149.
I.I. Beilis,
A. Shashurin, A. Nemirosvsky, S. Goldsmith, R.L. Boxman, “Anode temperature
distribution and coating characteristics in a Hot Refractory Anode Vacuum Arc
with an asymmetric anode” Surface and Coatings Technology Vol. 188-189 (2004)
pp. 228-233.
150.
E.
Gidalevich, S. Goldsmith, and R. L. Boxman, “Macroparticle rotation in the
vacuum arc plasma jet”, J. Appl. Phys. 95, No. 6, pp. 2969-2974, 2004.
151.
N.
Parkansky, B. Alterkop, R.L. Boxman, S. Goldsmith, Z. Barkay, Y Lereah, “Pulsed discharge production of
nano- and micro-particles in ethanol
and their characterization” Powder Technology Vol. 150 (2005)
pp. 36-41.
152.
I.I.
Beilis, A. Shashurin, A. Nemirovsky, R.L. Boxman, and S. Goldsmith “Imaging of
the Anode Plasma Plume Development in a Hot Refractory Anode Vacuum Arc”, IEEE
Trans. Plasma Sci. Vol. 33, pp. 408-9, 2005.
153.
T David, S Goldsmith and R.L. Boxman, “Dependence of zinc oxide thin film properties on
filtered vacuum arc deposition parameters”, J.
Phys. D: Appl. Phys. 38 No 14 (21 July 2005) 2407-2416
154.
V.N. Zhitomirsky,
T. David, R.L. Boxman, S. Goldsmith, A. Verdyan,
Ya.M. Soifer, L. Rapoport, “Properties of SnO2 coatings
fabricated on polymer substrates using filtered vacuum arc deposition”, Thin Solid Films 492 (2005) 187-194.
155.
.I. Beilis, A. Shashurin, R.L. Boxman and S. Goldsmith, “Influence of background gas pressure on copper film
deposition and ion current in a hot refractory anode vacuum arc” Surface & Coatings
Technology 200 (5-6): 1395-1400 Nov. 21 2005
156.
R. L.
Boxman, I.I. Beilis, E. Gidalevich, and V. N. Zhitomirsky, “Magnetic control in
vacuum arc deposition”, IEEE Trans. Plasma Sci. 33, pp. 1618-1625, 2005.
157.
I.I.
Beilis, A Shashurin, A. Nemirovsky, S. Goldsmith, and R.L. Boxman, “Measurements of the Anode Temperature in a
Vacuum Arc With an Asymmetric Hot Refractory Mo Anode”, IEEE Trans.
Plasma Sci., Vol.33, N5, Part 1I, 2005, (pp.1641-1647)
158.
V.N.
Zhitomirsky, R.L. Boxman and S. Goldsmith, “Transport of a vacuum arc
plasma beam through the aperture of an annular anode”, IEEE Trans. Plasma Sci.,
33, No. 5 (2005), pp. 1631-1635.
159.
R.L. Boxman
and V.N. Zhitomirsky, “Vacuum arc deposition devices”, INVITED REVIEW PAPER Rev.
Sci. Inst 77.,021101 (1-13), 2006.
160.
E Gidalevich and R L Boxman, “Sub- and supersonic expansion
of an arc channel in liquid”, J. Phys. D: Appl. Phys. 39 (2006) 652-659.
161.
E.
Cetinorgu, S. Goldsmith, and R.L. Boxman, “Air annealing effects on the optical
properties of ZnO-SnO2 thin films deposited by a filtered vacuum arc
deposition system”. Semicond. Sci. Technol. 21 (2006) 364-369.
162.
N. Parkansky,
O. Goldstein, B. Alterkop, R.L. Boxman, Z. Barkay, Yu. Rosenberg
and G. Frenkel, “Features of micro and nano-particles produced by pulsed
arc submerged in ethanol”, Powder
Technology 161 (3): 215-219 Feb. 3, 2006
163.
N. Parkansky, G. Frenkel, B. Alterkop, R.L. Boxman, S.
Goldsmith, Z. Barkay, Yu.
164.
I.I.
Beilis, A. Shashurin, R.L. Boxman, and S. Goldsmith, “Total ion current fraction in a hot refractory anode
vacuum arc”,
Appl. Phys. Let. 88 (7): Art. No. 071501 Feb. 13 2006.
165.
V.N.
Zhitomirsky, E. Cetinorgu, E. Adler, Yu. Rosenberg, R.L. Boxman and S.
Goldsmith, “Filtered Vacuum Arc Deposition of Transparent Conducting Al-doped
ZnO Films”, Thin Solid Films, 515 (2006), pp. 885-890.
166.
B Alterkop, S Goldsmith and R L Boxman “Drift wave instability in the presheath of a fully
ionized collisional plasma” Plasma Sources Sci. Technol.15 670-675, 2006.
167.
E.
Gidalevich, R. L. Boxman, “Steady-state model of an arc discharge in flowing
water”, Plasma Source Sci. Tech. 15, pp. 765-772, 2006
168.
B. Alterkop and R.L. Boxman,
“Sagdeev Potential and Sheath Criterion for a Multi-Component”, Contrib.
Plasma Phys. 46, No. 10, 826 –
833 (2006) / DOI 10.1002/ctpp.200610083.
169.
170.
A. Moshkovith,
V. Perfiliev, D. Gindin, N. Parkansky, R. Boxman, L. Rapoport, “Surface
texturing using pulsed air arc treatment” Wear 263 (2007), pp. 1467–1469 (doi:10.1016/j.wear.2006.11.043).
171.
A Shashurin, I.I. Beilis, Y. Sivan, S. Goldsmith and R.L. Boxman,
“Copper film deposition rates by a hot refractory anode vacuum arc and
magnetically filtered vacuum arc” Surface and Coatings Technology, 201, N7,
2006, (p.4145-4151).
172.
Çetinörgü, E., Goldsmith, S. and
Boxman, R.L. Optical Properties of
ZnO- SnO2 Thin Films Deposited by Filtered Vacuum Arc: J. Phys. D: Appl. Phys., 39(9) 1878 (2006).
173.
Çetinörgü E., Goldsmith S.,
Zhitomirsky V., Boxman R.L., Bungay C.L, Optical
Characterization of ZnO Thin Films Deposited by Filtered Vacuum Arc System: Semicond. Sci. Technol. 21 1303-1310 (2006).
174.
Çetinörgü, E., Goldsmith, S. and
Boxman, R.L. Effect of Deposition
Conditions on the Characteristics of ZnO-SnO2 Thin Films Deposited by
Filtered Vacuum Arc: Thin Solid
Films 515(3) 880 (2006)
175.
E.D. Bender,
V.N. Zhitomirsky, R.L. Boxman, “Hall stratum filtered cathodic arc source for
carbon plasma”, Surface
& Coatings Technology 201 (2007), pp. 6095-6100.
176.
E. Çetinórgü, S. Goldsmith, and R.L.
Boxman, “The effect of substrate temperature on filtered vacuum arc deposited
zinc oxide and tin oxide thin films”, J. Crystal Growth 299 (2007) pp. 259-267.
177.
B.
Alterkop, I.D. Duvinova, A.E. Durbinov, and R.L. Boxman, “The Double Sheath and
the Plasma-Wall Boundary”, Contrib. Plasma Phys. 47, No. 3, 190-201, (2007)
/DOI 10.1002/ctpp.200710027.
178.
179.
A Kleiman, A Márquez and R L Boxman, “Performance
of a magnetic island macroparticle filter in a titanium vacuum arc”, Plasma
Sources Sci. Technol. Vol. 17, 015008, (2008).
180.
Çetinörgü, E., Goldsmith, S.,
Rosenberg Yu., Boxman R.L. Influence
of annealing on the physical properties of filtered vacuum arc deposited tin
oxide thin films J.
Non-Crystalline Solids 353(26) 2595 (2007)
181.
Çetinörgü, E., Goldsmith, S. and
Boxman, R.L. Post-deposition annealing on the optical properties of filtered
vacuum arc deposited ZnO-SnO2 : J. Appl. Phys.:Cond. Matter 19(25) 256206 (2007).
182.
A. Moshkovith,
V. Perfiliev, D. Gindin, N. Parkansky, R. Boxman, L. Rapoport, “Solid
lubricants on textured surfaces obtained by pulsed air arc treatment”,
Tribologia – Finish Journal of Tribology 4, Vol. 26, pp. 15-20, 2007.
183.
I.I.
Beilis, A. Shashurin, R. L Boxman, “Measurement of Ion Flux as a Function of
Background Gas Pressure in a Hot Refractory Anode Vacuum Arc IEEE Trans. Plasma
Sci”., Vol.35, N4, Part 2, 2007, (pp. 973- 979).
184.
I.I.
Beilis, A. Snaiderman, A Shashurin, R.L. Boxman, S. Goldsmith, “Copper film
deposition and anode temperature measurements in a vacuum arc with tungsten
anode”, Surface and Coatings Technology, 202, issue 4-7, 2007, (p.925-930).
185.
N.
Parkansky, L. Glikman, I.I. Beilis, B. Alterkop, R.L.Boxman, D. Gindin, “W-C
Electrode Erosion in a Pulsed Arc Submerged in Liquid”, Plasma Chemistry and
Plasma Processing, v27, N6, p.789-797, 2007.
186.
A Shashurin, I
I Beilis and R L Boxman, “Angular distribution of ion current in a vacuum arc
with a refractory anode” Plasma Sources Sci. Technol. 17 (2008) 015016, doi:10.1088/0963-0252/17/1/015016
187.
N. Parkansky, B. Alterkop, R.L. Boxman, G. Leitus, O.
Berkh, Z. Barkay, Yu. Rosenberg, N. Eliaz, “Magnetic properties of carbon nano-particles
produced by a pulsed arc submerged in ethanol” Carbon 46 (2008) 215–219.
188.
B.
Alterkop,
189.
V.N.
Zhitomirsky, E. Çetinörgü, R.L. Boxman, S. Goldsmith,
“Properties of SnO2 Films Fabricated Using a Rectangular Filtered
Vacuum Arc Plasma Source”, Thin Solid Films 516 (2008) 5079-5086.
190.
N. Parkansky, G. Frenkel, B.
Alterkop, I. Beilis, R.L. Boxmana,
Z. Barkay, Yu.
191.
I.I.
Beilis, A. Shnaiderman, R.L. Boxman, “Chromium and titanium film deposition
using a hot refractory anode vacuum arc plasma source”, Surface & Coatings
Technology 203 (2008) 501–504.
192.
I.I.
Beilis, D. Grach, A Shashurin, R.L Boxman, “Filling Trenches on a SiO2
Substrate with Cu Using a Hot Refractory Anode Vacuum Arc" Microelectronic
Engineering, 85 1713-1716, 2008.
193.
N. Parkansky, B.A. Alterkop, R.L. Boxman, H. Mamane and D. Avisar, " Submerged Arc Breakdown of Sulfadimethoxine (SDM) in
Aqueous Solutions"
Plasma Chemistry and Plasma Processing, v28, N5, pp. 583–592, 2008.
194.
N. Parkansky, L. Glikman, I.I. Beilis, B. Alterkop, R.L. Boxman,
Yu. Rosenberg,
Z. Barkay, “W-C Synthesis in a Pulsed Arc Submerged in Liquid”, Plasma
Chemistry and Plasma Processing, v28, N6, p.265-375, 2008.
195.
I.I.
Beilis, A Shashurin, R.L Boxman, “Anode Plasma Plume Development in a Vacuum
Arc with a Black-Body Anode-Cathode Assembly", IEEE Trans. Plasma Sci.,
Vol.36, N4, Part 1, 2008, (pp.1030- 1031).
196.
A
Shashurin, I I Beilis and R L Boxman,
"Experimental
study of plasma parameters in a vacuum arc with a hot refractory anode",
Plasma Sources Sci. Technol. 18 (2009) 045004" (doi:10.1088/0963-0252/18/4/045004).
197.
H. Marks, I.I.
Beilis, R.L Boxman, “Measurement of the Vacuum Arc Plasma Force”, IEEE Trans. Plasma Sci., Vol.37,
N7, Part 2, 2009, (pp.1332- 1337).
198.
I.I. Beilis
and R.L. Boxman, “Metallic film deposition using a vacuum arc plasma source
with a refractory anode", Surface
and Coatings Technology, 204, N6-7, 2009, (p.865-871).
199.
Vladimir N.
Zhitomirsky, Avi Raveh, Raymond L. Boxman, and Samuel Goldsmith, " Vacuum
Arc Plasma Beam Produced From an Erbium Cathode" IEEE Trans. Plasma Sci.,
Vol. 37, N8, Part 1, 2009 (pp. 1517-1523).
200.
Sun Kyu Kim, Vinh Van Le, R. L. Boxman, Z. N. Zhitomirsky,
Jeong Yong Lee, "Cathodic arc plasma deposition of nano-multilayered
Zr-O/Al-O thin films", Surf. Coat. Technol. 204, (2010), pp 1697-1701.
201.
A
Shashurin, I I Beilis and R L Boxman, "Heat flux to an asymmetric anode in a hot refractory anode vacuum
arc", Plasma
Sources Sci. Technol. 19 (2010) 015002" (doi:
10.1088/0963-0252/19/1/015002).
202.
I.I. Beilis, Y. Koulik, R.L. Boxman and D. Arbilly, “Al and
Zn film deposition using a vacuum arc plasma source with a refractory
anode", Surface and Coatings
Technology, 205, N , 2010, p. 2369–2374.
203.
V.N.
Zhitomirsky, S.K. Kim, L. Burstein and R.L. Boxman "X-ray photoelectron
spectroscopy of nano-multilayered Zr-O/Al-O coatings deposited by cathodic
vacuum arc plasma", Appl. Surface Sci. 256 (2010) 6246–6253.
204.
N.
Parkansky, I.I. Beilis, D. Gindin, B. Alterkop, R.L. Boxman, A. Moshkovich, V. Perfilyev,
L. Rapoport, Yu.
205.
I.I. Beilis, Y. Koulik, R.L. Boxman, D. Arbilly, “Thin
film deposition using a plasma source with a hot refractory anode vacuum arc”,
J Mater Sci (2010) 45:6325–6331.
206.
I.
Zukerman, V.N. Zhitomirsky, G. Beit-Ya’akov, R.L. Boxman, A. Raveh, S.K. Kim,
Vacuum arc deposition of Al2O3–ZrO2 coatings: arc behavior and coating
characteristics, J Mater Sci (2010) 45:6379–6388, DOI
10.1007/s10853-010-4734-7.
207.
I.I.
Beilis, Y. Koulik, R.L. Boxman, "Temperature Distribution Dependence on
Refractory Anode Thickness in a Vacuum Arc: Experiment", IEEE Trans.
Plasma Sci., Vol.39, N6, Part 1, 2011, (pp. 1303-1306).
208.
I.I.
Beilis, Y. Koulik, R.L. Boxman, "Temperature Distribution Dependence on
Refractory Anode Thickness in a Vacuum Arc: Theory", IEEE Trans. Plasma
Sci., Vol.39, N6, Part 1, 2011, (pp. 1307-1310).
209.
I.I.
Beilis, Y. Koulik, R.L. Boxman, "Evolution of a Plasma Plume from Shower
Anode in a Vacuum Arc with a Black-Body Electrode Configuration", IEEE
Trans. Plasma Sci., Vol.39 SPECIAL ISSUE
– IMAGES IN PLASMA SCIENCE, no. 11, pp. 2838-2839, 2011.
210.
I.I.
Beilis, Y. Koulik, R.L. Boxman, “Ion current density measurements in a copper
vacuum arc with different refractory anode thicknesses”, J. Appl. Phys. 111,
043302 (2012).
211.
N. Parkansky, A. Vegerhof, B.A. Alterkop, O. Berkh, R.L. Boxman "Submerged
Arc Breakdown of Methylene Blue in Aqueous Solutions ", Plasma
Chemistry and Plasma Processing, 2012, 10.1007/s11090-012-9385-9.
212.
O. Goldberg, E. Goldenberg, V.N.
Zhitomirsky, S. Cohen, R.L. Boxman, Zirconium vacuum arc operation in a mixture
of Ar and O2 gases: Ar effect on the arcing characteristics, deposition rate
and coating properties”, Surface & Coatings Technology (2012) Vol. 206, pp. 4417-4424 doi:10.1016/j.surfcoat.2012.04.082
213.
E. Gidalevich, R.L. Boxman,
“MICROWAVE EXCITATION OF SUBMERGED PLASMA BUBBLES”, J. Phys. D: Appl. Phys. 45
(2012) 245204.
214.
N. Parkansky, I.I. Beilis, B. Alterkop, R.L. Boxman and Yu.
215.
M.N. Horenstien, M.K. Mazumder,
R.C. Sumner, J. Stark, T. Abuhamed, and R. Boxman, "Modeling of
Trajectories in an Electodyamic Screen for Obtaining Maximum Particle Removal
Efficiency", IEEE Trans. In. Appl. 49, pp. 707-713, 2013.
216.
E.
Çetinörgü-Goldenberg, L. Burstein,
217.
I.I.
Beilis, Y. Koulik, R.L. Boxman, “Sn thin film deposition using a vacuum arc
plasma source with a refractory anode", Surface and Coatings Technology, 232, N 15 October, 2013, p. 936–940.
218.
I.I.
Beilis, Y. Koulik, R.L. Boxman, "Cu Ion Current Measurements in a Vacuum
Arc with a Black Body Electrode Configuration", IEEE Trans. Plasma Sci.,
Vol.41, N8, Part II, 2013, (pp. 1987-1991).
219.
I.I.
Beilis, Y. Koulik, R.L. Boxman, "Effective Cathode Voltage in a Vacuum Arc
with a Black Body Electrode Configuration", IEEE Trans. Plasma Sci.,
Vol.41, N8, Part II, 2013, (pp. 1992-1995).
220.
N. Parkansky, E. Faktorovich Simon, B.A. Alterkop, R.L. Boxman, O. Berkh "Decomposition of Dissolved Methylene
Blue in Water Using a Submerged Arc Between Titanium Electrodes" Plasma Chemistry and Plasma Processing, DO
221.
N. Parkansky, V. Yakubov, E. Faktorovich Simon, B.
222.
I.I. Beilis, Y. Koulik, R.L. Boxman “Cu film deposition
using a vacuum arc with a black-body electrode assembly”,Surface
& Coatings Technology258 (2014) 908–912.
223.
Mohammed
Ibrahim Jamesh, R.L. Boxman, Neil J. Nosworthy, I. S. Falconer, Paul K Chu,
Marcela M. M. Bilek, Alexey Kondyurin, R. Ganesan, and David R. McKenzie “Graded
Metal Carbon Protein Binding Films Prepared by Hybrid Cathodic Arc - Glow
Discharge Plasma Assisted Chemical Vapor Deposition” Surface & Coatings
Technology 265, 222-234, 2105.
224.
Parkansky, N; Yakubov, Violetta; Beilis, Isak; Boxman, Raymond;
Berkh, Olga "Electrode erosion during submerged arc treatment of methylene
blue water solution", J. Phys. D: Appl. Phys. 48: 225202 (9pp).
225.
I.I. Beilis, B. Sagi, V.
Zhitomirsky, and R. L. Boxman, “Cathode spot motion in a vacuum arc with a long
roof-shaped cathode under magnetic field”, Journal of Applied Physics 117,
233303 (2015); doi: 10.1063/1.4922862
226.
I.I. Beilis, Y. Koulik, Y. Yankelevich, D.Arbilly, and R.L. Boxman, "Thin-Film
Deposition With Refractory Materials Using a Vacuum Arc" IEEE Trans. Plasma
Sci., vol. 43, pp. 2323-2328, 2015
227.
Mohammed Ibrahim
Jamesh, Penghui Li, Marcela M.M.
Bilek, R.L. Boxman, David R.
McKenzie, Paul K. Chu, "Evaluation
of Corrosion Resistance and Cytocompatibility of Graded Metal Carbon Film on Ti
and NiTi Prepared by Hybrid Cathodic Arc / Glow Discharge Plasma-Assisted
Chemical Vapor Deposition", Corrosion Science 05/2015; 97.
DOI:10.1016/j.corsci.2015.04.022.
228. I. Zukerman, E. Goldenberg, V.N. Zhitomirsky, A. Raveh and R. L. Boxman, “Thermal Stability of Er2O3 Coatings Deposited using Filtered Vacuum Arc”, J. Surf. Coat. Technol. 2, 2015, 13-19.
229. I. Zukerman, R. L. Boxman and A. Raveh, “Reactive Magnetron Sputtering of ZrO2/Al2O3 Coatings: Alumina Content and Structure Stability", J. Surf. Coat. Technol. 2, 2015, 56-64.
230.
Mohammed Ibrahim Jamesh, R.L. Boxman, Marcela M.M.
Bilek, Cenk Kocer, Tingwei Hu, Xuming Zhang, David R. McKenzie, Paul K. Chu, “Effects of pulse voltage
and deposition time on the adhesion strength of graded metal/carbon films
deposited on bendable stainless steel foils by hybrid cathodic arc - glow
discharge plasma assisted chemical vapor deposition”, Applied Surface Science 366
(2016) 535–544.
231.
Ariel Meirovich, Naum Parkansky, Raymond L. Boxman, Olga Berkh,
Zahava Barkay, Yuri Rosenberg, "Treatment of Methylene Blue Water solution
by Submerged Pulse Arc in Multi-electrode Reactor", Journal of Water
Process Engineering, 10.1016/j.jwpe.2016.08.002, 11-AUG (2016), pp. 53-60.
232. I. Zukerman, R. L. Boxman and A. Raveh, "Effect of the substrate temperature and bias voltage on the properties of ZrO2/Al2O3 coatings produced by pulsed magnetron sputtering and filtered vacuum arc deposition", Functional Nanostructures 1, 2016, 35-43.
233. I.I. Beilis, Y. Koulik, R.L. Boxman, “Anode Temperature Evolution in a Vacuum Arc with a Blackbody Electrode Configuration”, IEEE Trans. Plasma Sci., Vol.45, N4, August 2017.
Conference Papers
1.
R.L. Boxman, “Magnetic
Constriction Effects Prior to Anode Spot Formation in Vacuum Arcs,” IIIrd
International Conference of Electrode Phenomena in Gas Discharge,
2.
R.L. Boxman and S.
Goldsmith, “Ion and Neutral Excited State Densities in a Multi-Cathode-Spot
Vacuum Arc, “30th Gaseous Electronics Conference,
3.
S. Shalev, S. Goldsmith,
and R.L. Boxman, “Density of Cd I and Cd II Excited States in a Multi-Cathode-Spot Vacuum Arc,
Part I - Spatial Dependence,” 1980 Meeting of the
4.
S. Shalev, S. Goldsmith and
R.L. Boxman, “Density of Cd I and Cd II Excited States in a Multi-Cathode-Spot Vacuum Arc. Part II - Temporal
Dependence,” 1980 Meeting of the
5.
S. Goldsmith, S. Shalev,
and R.L. Boxman, “Population Inversion of Cd II Levels in a Multi-Cathode-Spot
Vacuum Arc,” 1980 IEEE Int. Conf. on Plasma Science, (paper 4D5),
6.
S. Shalev, S. Goldsmith,
and R.L. Boxman, “Density of Cd I and Cd II Excited States in a
Multi-Cathode-Spot Vacuum Arc,” IXth International Symposium on Discharges and
Electrical Insulation in Vacuum,
7.
R.L. Boxman and S.
Goldsmith, “Energy and Mass Transport in the Interelectrode Plasma of a
Multi-Cathode-Spot Vacuum (Metal Vapor) Arc”, International Workshop on Plasma
Chemistry in Technology,
8.
Y. Bressler, R.L. Boxman,
and S. Goldsmith, “Density Population of ZnI, ZnII, and ZnIII Excited States in
a Multi-Cathode-Spot Vacuum Arc”, 1981 Meeting of the
9.
S. Goldsmith, Y. Bressler
and R.L. Boxman, “Density Populations of ZnI, ZnII Excited States in Multi-Cathode-Spot
Vacuum Arcs”, 34th Gaseous Electronics Conference,
10.
R.L. Boxman and S. Goldsmith, “The Anode Region in a Uniform
Multi- Cathode-Spot Vacuum Arc”, 34th Gaseous Electronics Conference,
11. I. Izraeli, R.L. Boxman and S. Goldsmith, “The Influence of the Self Magnetic Field on the Current Flow in Axi-symmetric Tensor Conductivity Plasma”, 34th Gaseous Electronics Conference, Boston, 1981, p.83.
12.
S. Shalev, S. Goldsmith and R.L. Boxman, “Anodic Erosion in
Multi Cathode-Spot Vacuum Arcs”, 35th
Gaseous Electronics Conference,
13. S. Shalev, S. Goldsmith and R.L. Boxman, “In-situ Determination of Macroparticles Velocity Distributions in a Multi-Cathode-Spot Copper Vacuum Arc”, Xth International Symposium on Discharges and Electrical Insulation in Vacuum, Columbia, S.C., 1982, pp. 174-180.
14. I. Izraeli, S. Goldsmith and R.L. Boxman, “The Influence of the Self Magnetic Field on the Steady State Current Distribution in an Axially Flowing Conducting Medium”, Xth International Symposium on Discharges and Electrical Insulation in Vacuum, Columbia, S.C., 1982, pp. 193-199.
15.
S. Goldsmith, S. Shalev and R.L. Boxman, “Melting of the Anode
in a Multi-Cathode-Spot Vacuum Arc”, Xth International Symposium of Discharges
and Electrical Insulation in Vacuum,
16. F.T. Warren, R.L. Boxman, J.E. Thompson and T.S. Sudarshan, “Current Evolution in a Pulsed Overstressed Radial Vacuum Gap”, Xth International Symposium on Discharges and Electrical Insulation in Vacuum, Columbia, S.C., 1982, pp. 43-53.
17.
J.M. Wilson, R.L. Boxman and J.E. Thompson, “Breakdown Time of a
Triggered Vacuum and Low-Pressure Switch”, Xth International Symposium on
Discharges and Electrical Insulation in Vacuum,
18.
R. Lee, T.S. Sudarshan, J.E. Thompson and R.L. Boxman,
“Predischarge Current Measurements in Vacuum Gaps Bridged with Plexiglass
Insulators”, Xth International Symposium on Discharges and Electrical
Insulation in Vacuum,
19.
R.L. Boxman, S. Goldsmith, I. Izraeli and S. Shalev, “A Model of
the Multi-Cathode-Spot Vacuum Arc”, Xth International Symposium on Discharges
and Electrical Insulation in Vacuum,
20. R.L. Boxman, S. Goldsmith, S. Shalev, H. Yaloz, and N. Brosh “Fast Deposition of Metallurgical Coatings and Production of Surface Alloys Using a Pulsed High Current Vacuum Arc”, XIth International Symposium on Discharges and Electrical Insulation in Vacuum, Berlin, September, 1984, pp. 471-474.
21.
I. Izraeli, A.W. Whitman, R.L. Boxman and S. Goldsmith,
“Asymptotic Analysis of the Steady State Current Flow in a Uniform
Multi-Cathode-Spot Generated Vacuum Arc Plasma Flow”, XIth International
Symposium on Discharges and Electrical Insulation in Vacuum,
22.
S. Shalev, R.L. Boxman and S. Goldsmith, “Macroparticle Dynamics
During MCS Vacuum Arcs”, XIth International Symposium on Discharges and
Electrical Insulation in Vacuum,
23.
S. Shalev, R.L. Boxman and S. Goldsmith, “Spectroscopic
Investigation of Anode Erosion During Multi-Cathode-Spot Vacuum Arcs”, XIth
International Symposium on Discharges and Electrical Insulation in Vacuum,
24.
B. Gellert, E. Schade and R.L. Boxman, “Time and Spatially
Resolved Spectroscopy of the
25. R.L. Boxman, S. Goldsmith, S. Shalev, H. Yaloz and N. Brosh, “Fast Deposition of Metallurgical Coatings and Production of Surface Alloys Using a Pulsed High Current Vacuum Arc”, INTERFINISH 84, 11th World Congress on Metal Finishing, Jerusalem, October, 1984, pp. 161-167. Awarded Boris and Renee Joffe Prize for Best Paper Presented.
26.
R.L. Boxman, “Vacuum Arc Deposition”,
27.
R.L. Boxman,
28.
B. Gellert, E. Schade and R.L. Boxman, “Time and Spatially
Resolved Spectroscopy of the
29.
R.L. Boxman, S. Goldsmith, E. Sapir, “Metallographic Measurement
of Heat Flux at the Anode Surface of a Vacuum Arc”. Guest Lecture, Current Zero Club,
30. G. Disatnik, R.L. Boxman, S. Goldsmith, “Characteristics of macro particle emission from a high current density multi-cathode-spot pulsed vacuum arc”, XIIth International Symposium on Discharges and Electrical Insulation in Vacuum, Shoresh, Israel, 22-25 September, 1986, pp. 104-108.
31. S. Goldsmith, R.L. Boxman, E. Sapir, Y. Cohen, H. Yaloz, N. Brosh, “Distribution of peak temperature and energy flux on the surface of the anode in a multi-cathode-spot pulsed vacuum arc”, XIIth International Symposium on Discharges and Electrical Insulation in Vacuum, Shoresh, Israel, 22-25 September, 1986, pp. 114-119.
32. I. Izraeli, R.L. Boxman, S. Goldsmith, “The current distribution and the magnetic pressure profile in a vacuum arc subjected to an axial magnetic field”, XIIth International Symposium on Discharges and Electrical Insulation in Vacuum, Shoresh, Israel, 22-25 September, 1986, pp. 125-130.
33. S. Bababeygy, R.L. Boxman, S. Goldsmith, “Corrosion evaluation of very rapid high-current vacuum arc coatings”, XIIth International Symposium on Discharges and Electrical Insulation in Vacuum, Shoresh, Israel, 22-25 September, 1986, pp. 178-182.
34. R.L. Boxman, “Fundamentals of switching in vacuum”, XIIth International Symposium on Discharges and Electrical Insulation in Vacuum, Shoresh, Israel, 22-25 September, 1986, workshop on Switching in Vacuum.
35.
R.L. Boxman and S. Goldsmith, “Cathode-spot arc coatings:
physics, deposition and heating rates, and some examples”, International
Conference on Metallurgical Coatings,
36.
S. Bababeygy, R.L. Boxman, and S. Goldsmith, “Corrosion
protection by vacuum arc coatings”, INTERFINISH-88, XIIth World Congress on
Metal Finishing,
37.
Y. Cohen, R.L. Boxman, and S. Goldsmith, “Angular distribution
of ion current emerging from an aperture anode in a vacuum arc”, XIIIth
International Symposium on Discharges and Electrical Insulation in Vacuum,
38.
R.L. Boxman and S. Goldsmith, “Principles and applications of
vacuum arc coatings”, XIIIth International Symposium on Discharges and
Electrical Insulation in Vacuum,
39.
R.L. Boxman and S. Goldsmith, “A model for a uniform
steady-state vacuum arc with a hot anode”, XIIIth International Symposium on
Discharges and Electrical Insulation in Vacuum,
40. S. Bababeygy, R.L. Boxman and S. Goldsmith, “Anodic polarization and corrosion protection of vacuum arc coatings”, Metal Finishing Society of Israel annual meeting, Eilat, March, 1988.
41. R.L. Boxman and S. Goldsmith, “Characterization of a 1 kA vacuum arc plasma gun for use as a metal vapor deposition source”, 8th Int. Conf. on Thin Films/17th Int. Conf. on Metallurgical Coatings, San Diego, 1990, p. A 126.
42.
R.L. Boxman and S. Goldsmith, “Vacuum arc deposition in the 19th
Century”, XIVth Int. Symp. on Discharges and Electrical Insulation in Vacuum,
43.
U. Kinrot, S. Goldsmith and R.L. Boxman, “Spectroscopic study of
the spatial distribution of helium background gas in an aluminum vacuum arc”,
XIVth Int. Symp. on Discharges and Electrical Insulation in Vacuum,
44.
U. Kinrot, S. Goldsmith and R.L. Boxman, “Space resolved
spectroscopic study of aluminum vacuum arc burning in helium background”, XIVth
Int. Symp. on Discharges and Electrical Insulation in Vacuum,
45.
R.L. Boxman and S. Goldsmith, “Macroparticle Contamination in
Cathodic Arc Coatings: Generation, Transport, and Control”, International
Conference on Metallurgical Coatings and Thin Films,
46.
A. Ishaaya, R.L. Boxman and S. Goldsmith “Measurement of cathode
spot velocity and distribution on a disc cathode in a radial magnetic field”,
presented at the Int. Conf. on Metallurgical Coatings and Thin Films,
47.
N. Parkansky, I. Beilis, R.L. Boxman, and S. Goldsmith,
“Electrode Erosion During Pulsed Arcing”, to be presented at XVth Int. Symp. On
Discharges And Electrical Insulation In Vacuum,
48.
A. Ben-Shalom, R.L. Boxman and S. Goldsmith, “Ion current
collected at various distances and argon background pressures in a copper vacuum
arc”, XVth Int. Symp. On Discharges And Electrical Insulation In Vacuum,
49.
A. Vaknin, S. Goldsmith and R.L. Boxman, “Spectroscopic study of
electron density in a copper vacuum arc”, XVth Int. Symp. On Discharges And
Electrical Insulation In Vacuum,
50. N. Parkansky, R.L. Boxman and S. Goldsmith, “Development and application of pulsed air arc deposition”, Int. Conf. on Metallurgical Coatings and Thin Films, San Diego, April, 1993.
51. R.L. Boxman and S. Goldsmith, “Mass and surface conductivity gain on polymer surfaces metalized using vacuum arc deposition”, Int. Conf. on Metallurgical Coatings and Thin Films, San Diego, April, 1993.
52. A. Ben-Shalom, R.L. Boxman and S. Goldsmith, “SnO2 transparent conductor films produced by a filtered vacuum arc”, Int. Conf. on Metallurgical Coatings and Thin Films, San Diego, April, 1993.
53. I. Beilis, R.L. Boxman, M. Keidar and S. Goldsmith, “The kinetics of macroparticles charging in strongly ionized plasmas”, Israel Physical Society, 1993 Annual Meeting. Bull. IPS Vol. 39, p. 79, 1993.
54. A. Ben-Shalom, L. Kaplan, R.L. Boxman, S. Goldsmith, M. Nathan, “Vacuum arc deposition of conductive transparent Sn-0 films, and the influence of post-deposition annealing on their phase composition, resistance and transparency”, 13th Israeli Vacuum Society Conference, Tel-Aviv, May, 1993, p. 16.
55. S. Goldsmith, H. Rosenthal, P. Avivi and R.L. Boxman, “Diamond growth in hot anode vacuum arcs”, Diamond Films 93, Albufeira, Portugal, 20-24 September, 1993.
56.
M. Keidar, I. Beilis, S. Goldsmith and R.L. Boxman, “The
kinetics of macroparticles charging in strongly ionized plasmas”, Int. Conf. on
Phenomena in Ionized Gases,
57.
A. Ben-Shalom, R.L. Boxman and S. Goldsmith, “Vacuum arc
deposition of transparent windshield defroster coatings”, SAE Subzero
Engineering Conditions Conference,
58. V.N. Zhitomirsky, R.L. Boxman, S. Goldsmith, “Influence of an external magnetic fields on cathode spot motion and coating deposition using filtered arc evaporation”, Int. Conf. on Metallurgical Coatings and Thin Films - ICMCTF-94, San Diego, April, 1994.
59. L. Kaplan, A. Ben-Shalom, R.L. Boxman, S. Goldsmith, M. Nathan, “Sn-0 based transparent conductive films produced by filtered vacuum arc deposition”, Int. Conf. on Metallurgical Coatings and Thin Films - ICMCTF-94, San Diego, April, 1994.
60. D. Arbilly, R.L. Boxman and S. Goldsmith, “Amorphous Si thin films prepared by vacuum arc deposition”, Int. Conf. on Metallurgical Coatings and Thin Films - ICMCTF-94, San Diego, April, 1994.
61. N. Parkansky, Yu. Rosenberg, R. Boxman and S. Goldsmith, “Pulsed air arc deposition of amorphous coatings using Fe-Mo powder mixtures”, Int. Conf. on Metallurgical Coatings and Thin Films - ICMCTF-94, San Diego, April, 1994.
62.
B. Alterkop, I. Beilis, R. Boxman and S. Goldsmith, “Influence
of current instabilities on the parameters of the vacuum arc plasma jet”, Int.
Symp. on Discharges and Electrical Insulation in Vacuum,
63.
M. Keidar, I. Beilis, R.L. Boxman and S. Goldsmith,
“Non-stationary macroparticle charging in an arc plasma jet”, Int. Symp. on
Discharges and Electrical Insulation in Vacuum,
64.
H. Rosenthal, I. Beilis, R.L. Boxman and S. Goldsmith,
“Investigation of the non-stationary anode temperature in a hot anode vacuum
arc”, Int. Symp. on Discharges and Electrical Insulation in Vacuum,
65.
66.
V.N. Zhitomirsky, R.L. Boxman and S. Goldsmith, “Plasma and
coating characteristics in a filtered vacuum arc deposition system”, Int. Symp.
on Discharges and Electrical Insulation in Vacuum,
67. R.L. Boxman, S. Goldsmith, A. Ben-Shalom, L. Kaplan, D. Arbilly, E. Gidalevich, V. N. Zhitomirsky, A. Ishaya, M. Keidar, I. Beilis, “Filtered vacuum arc deposition of semi-conductor thin films”, Int. Symp. on Discharges and Electrical Insulation in Vacuum, Moscow, May, 1994 (p. 90). INVITED LECTURE.
68. N. Parkansky, R.L. Boxman, S. Goldsmith, Y. Rosenberg, A. Ben-Shalom, L. Kaplan, D. Arbilly, “Improvement of thin film semi-conductor conductivities using a transverse current during deposition, Int. Conference on Metallurgical Coatings and Thin Films, ICMCTF-94, San-Diego, April, 1994.
69. K. Pourrezaei, R.B. Beard, I. Shevets, M. Delaurentis, R.L. Boxman, N. Croitoru, “Development of antiinfection and antithrombosis coatings for inside and outside of medical catheters”, Int. Conference on Metallurgical Coatings and Thin Films, ICMCTF-94, San-Diego, April 25-29, 1994.
70.
M. Keidar, I. Beilis, R.L. Boxman and S. Goldsmith, “Electrostatic
field effects on the transport of macroparticles in magnetized plasma ducts”,
ISPC-12, pp. 1367-1372.
71. L. Kaplan, V.N. Zhitomirsky, R.L. Boxman and S. Goldsmith, “Arc behavior during filtered vacuum arc deposition of Sn-O thin films”, Int. Conf. on Metallurgical Coatings and Thin Films, ICMCTF-95, San Diego, April, 1995.
72. V.N. Zhitomirsky, L. Kaplan, R.L. Boxman and S. Goldsmith, “Ion current distribution in the plasma duct of a filtered vacuum arc deposition system”, Int. Conf. on Metallurgical Coatings and Thin Films, ICMCTF-95, San Diego, April, 1995.
73. N. Parkansky, R. Rosenbaum, Y. Rosenberg, R.L. Boxman and S. Goldsmith, “Influence of transverse current during In-O vapor deposition”, Int. Conf. on Metallurgical Coatings and Thin Films, ICMCTF-95, San Diego, April, 1995.
74. N. Parkansky, R.L. Boxman, S. Goldsmith and Y. Rosenberg, “Corrosion resistance of Zn-coatings produced by pulsed-air arc deposition”, Int. Conf. on Metallurgical Coatings and Thin Films, ICMCTF-95, San Diego, April, 1995.
75.
M. Keidar, I. Beilis, R.L. Boxman and S. Goldsmith, “The
magnetic presheath in the plasma-wall transition”, ICPIG XXII, Vol. II, pp.
157-158.
76.
M. Keidar, I. Beilis, R.L. Boxman, S. Goldsmith, “Vacuum arc plasma jet
parameter distribution in the interelectrode gap in a magnetic field”, Israel
Physical Society Meeting,
77.
R.L. Boxman, S. Goldsmith, V. Zhitomirsky, E. Gidalevich, I.
Beilis, M. Keidar, “Filtered vacuum arc deposition”, Israel Physical Society
Meeting, Jerusalem, 1996, Bull. IPS, Vol. 42, p. 168.
78. R.L. Boxman, S. Goldsmith, V.N. Zhitomirsky, B. Alterkop, E. Gidalevich, I. Beilis and M. Keidar, “Recent progress in filtered vacuum arc deposition”, Int. Conf. on Metallurgical Coatings and Thin Films, ICMCTF-96, San Diego, April, 1996. INVITED PAPER.
79. B. Alterkop, N. Parkansky, R.L. Boxman and S. Goldsmith, “Influence of a parallel electric field on the conductivity of a growing indium oxide film”, Int. Conf. on Metallurgical Coatings and Thin Films, ICMCTF-96, San Diego, April, 1996.
80. N. Parkansky, B. Alterkop, R. Rosenbaum, R.L. Boxman and S. Goldsmith, “Reduction and oxidation of amorphous indium oxide films during post-deposition transverse current injection”, Int. Conf. on Metallurgical Coatings and Thin Films, ICMCTF-96, San Diego, April, 1996.
81. M. Keidar, I. Beilis, R.L. Boxman and S. Goldsmith, “Macroparticle interaction with a substrate in cathodic vacuum arc deposition”, Int. Conf. on Metallurgical Coatings and Thin Films, ICMCTF-96, San Diego, April, 1996.
82. V.N. Zhitomirsky, U. Kinrot, B. Alterkop, R.L. Boxman and S. Goldsmith, “Influence of gas pressure on the ion current distribution in a filtered vacuum arc deposition system”, Int. Conf. on Metallurgical Coatings and Thin Films, ICMCTF-96, San Diego, April, 1996.
83.
L. Kaplan, I. Rusman, R.L. Boxman, S. Goldsmith, M. Nathan, and
E. Ben-Jacob, “STM and XPS Study of
Filtered Vacuum Arc Deposited Sn-O Films After Rapid Thermal Annealing”, Int.
Conf. on Metallurgical Coatings and Thin Films, ICMCTF-96,
84.
B. Alterkop, V.N. Zhitomirsky, S. Goldsmith, R.L. Boxman,
“Vacuum arc plasma beam transport through a toroidal duct”, Proc. XVIIth Int.
Symp. on Discharges and Electrical Insulation in Vacuum,
85.
B. Alterkop,
86.
B. Alterkop,
87.
V.N. Zhitomirsky, B. Alterkop, U. Kinrot, R.L. Boxman and S.
Goldsmith, "Role of the magnetic field in the cathode region in cathodic
vacuum arc operation", "Proc. XVIIth Int. Symp. on Discharges and
Electrical Insulation in Vacuum,
88.
V.N. Zhitomirsky, R.L. Boxman and S. Goldsmith, " Ion
current distribution within a toroidal duct of a filtered vacuum arc deposition
system", "Proc. XVIIth Int. Symp. on Discharges and Electrical
Insulation in Vacuum,”
89.
M. Keidar, I. Beilis, R.L. Boxman and S. Goldsmith, “Potential
and current distribution in the interelectrode gap of the vacuum arc in a
magnetic field”, Proc. XVIIth Int. Symp. on Discharges and Electrical
Insulation in Vacuum,
90.
M. Keidar, I. Beilis, R.L. Boxman and S. Goldsmith, “The free
MHD flow of the low-density vacuum arc cathodic jet”, 8th Beer Sheva
International Seminar MHD Flows and Turbulence,
91. I. Grimberg, V.N. Zhitomirsky, N. Parkansky, A. Matthews, A. Wilson, R.L. Boxman, B.Z. Weiss, and S. Goldsmith, "Structure and Tribological Properties of Thin Vacuum Arc Coatings on Polysulfone", Int. Conf. on Metallurgical Coatings and Thin Films, ICMCTF-97, San-Diego, USA, April 1997.
92.
V.N. Zhitomirsky, I. Grimberg, R.L. Boxman, B.Z. Weiss,
N.A. Travitzky and S. Goldsmith, "Vacuum Arc Deposition and
Microstructure of ZrN-Based Coatings", Int. Conf. on Metallurgical
Coatings and Thin Films, ICMCTF-97,
93. M. Keidar, I. Beilis, R. Aharonov, D. Arbilly, R.L. Boxman, S. Goldsmith, Macroparticle distribution in quarter torus separator of a filtered vacuum arc deposition system, ICMCTF, San-Diego, California, April 1997 (pp.161).
94. I. Beilis, M. Keidar, R.L. Boxman, S. Goldsmith, Macroparticle and plasma transport through positively biased separators in filtered vacuum arc deposition, ICMCTF, San-Diego, California, April 1997 (pp.160).
95. I. I. Beilis, R.L.Boxman, S. Goldsmith, The Plasma-Model of New Mode Hot Anode Vacuum Arc, XXIII ICPIG, Toulouse, France, July 1997, Vol. II, pp. 84-85.
96.
R.L. Boxman “Vacuum Arc Deposof Multi-layer and Multi-component
Coatings”, American Physical Society - Plasma Physics Division Conference,
97.
S. G. Wang, R.L. Boxman and S. Goldsmith, “Measurement of the Ion
Current in a Variable Gap Filtered Vacuum Arc Carbon Source” 1st Israeli Conference on Plasma Physics and its Applications, Tel Aviv, Feb. 1998.
98.
E. Gidalevich, R.L. Boxman, and S. Goldsmith, “Shock Front Formation in
Plasma Coating Devices”, 1st Israeli Conference on Plasma Physics
and its Applications, Tel Aviv, Feb. 1998.
99.
N. Narkiss, J.Ashkenazy, G. Appelbaum, Y. Raitses, R. Boxman, “Arc
Discharge Hollow Cathodes for Space Propulsion Applications”, 1st Israeli Conference on Plasma Physics and its Applications, Tel Aviv, Feb. 1998.
100.
R. Ben-Ami, V.N.
Zhitomirsky, R.L. Boxman, S. Goldsmith, “Plasma Distribution in a Triple
Cathode Vacuum Arc Deposition Apparatus”, 1st Israeli Conference on
Plasma Physics and its Applications, Tel Aviv, Feb. 1998.
101.
R.L. Boxman,
N. Parkansky, S. Goldsmith, “Pulsed Arc Deposition”, 1st Int. Pulsed Plasma Surface Technologies Workshop,
102.
I. Grimberg,
V.N. Zhitomirsky, R.L. Boxman, S Goldsmith, and B.Z. Weiss,
"Multicomponent Ti-Zr-N and Ti-Nb-N coatings deposited by vacuum
arc", Int. Conf. on Metallurgical Coatings and Thin Films, ICMCTF-98,
San-Diego, USA, 1998.
103.
V.N. Zhitomirsky,
I. Grimberg, R.L. Boxman, S. Goldsmith, M.C. Joseph, B.Z. Weiss,
and A. Matthews, "Structure and Properties of Vacuum Arc TiN/NbN
Multilayer Coatings", Int. Conf. on Metallurgical Coatings and Thin Films,
ICMCTF-98,
104.
V.N. Zhitomirsky,
I. Grimberg, M.C. Joseph, R.L. Boxman, B.Z. Weiss,
A. Matthews, and S. Goldsmith, "Vacuum Arc Deposition of
Metal/Ceramic Coatings on Polymer Substrates", Int. Conf. on Metallurgical
Coatings and Thin Films, ICMCTF-98, San-Diego, USA, 1998.
105.
N. Parkansky, B. Alterkop, R.L. Boxman, S. Goldsmith ,
Yu.
106.
I. Beilis, M. Keidar,
R.L. Boxman, S. Goldsmith, “Effects of Macroparticle Separation in Positively
Biased Ducts in the Filtered Vacuum Arc Deposition System”, Int. Conf. on
Metallurgical Coatings and Thin Films, ICMCTF-98,
107.
D. Arbilly, R. Nadis, I.
Balberg, R.L. Boxman, S. Goldsmith, “Opto-electronic Properties of Amorphous
Silicon Films Rapidly Grown by Filtered Vacuum Arc”, Int. Conf. on
Metallurgical Coatings and Thin Films, ICMCTF-98, San-Diego, USA, 1998.
108.
N. Parkansky, I.I. Beilis, R L. Boxman, S. Goldsmith and Yu.
109.
V.N. Zhitomirsky,
R.L. Boxman, S. Goldsmith, I. Grimberg , and B.Z. Weiss,
“Superposition of two plasma beams produced by different cathodes in a
triple-cathode vacuum arc deposition apparatus”, XVIIIth Int. Symposium on
Discharges and Electrical Insulation in Vacuum, Eindhoven, the Netherlands,
1998.
110.
I.I. Beilis, M. Keidar, R.L. Boxman, and S. Goldsmith, “Plasma
expansion and current flow in a vacuum arc with a small anode”, Proc. XVIIIth
Int. Symposium on Discharges and Electrical Insulation in Vacuum,
111. I. I. Beilis, R.L. Boxman, S. Goldsmith, “A vacuum arc with refractory hot anode” Proc. XVIIIth Int. Symposium on Discharges and Electrical Insulation in Vacuum, Eindhoven, the Netherlands, August 17-21, 1998 (pp.240-243).
112.
E. Gidalevich,
R.L. Boxman, S. Goldsmith, “Mixing of supersonic plasma jets”, XVIIIth
Int. Symposium on Discharges and Electrical Insulation in Vacuum, Eindhoven,
the Netherlands, 17-21 August 1998. INVITED LECTURE
113.
E. Gidalevich, R.L. Boxman, S. Goldsmith, “A Simple Method of
Enhancing Magnetic Filter Efficiency”, Proc. Int. Symp. on Discharges and
Electrical Insulation in Vacuum,
114.
I. I.
Beilis, R.L. Boxman, S. Goldsmith, “Theoretical investigation of a hot
refractory anode vacuum arc”, Proceeding of the IPS, Tel-Aviv, vol. 45, 1999
(p.213).
115.
1. V.N. Zhitomirsky, I. Grimberg, L. Rapoport, N.A. Travitzky,
R.L. Boxman, S. Goldsmith and B.Z. Weiss, "Vacuum arc deposition of TiN,
NbN and TiN/NbN multilayer coatings", Proc. Int. Conf. on Metallurgical
and Protective Coatings and Thin Films, ICMCTF-99, San-Diego, USA, 12-16 April
1999.
116.
V.N. Zhitomirsky, I. Grimberg, M.C. Joseph, R.L. Boxman, A.
Matthews and B.Z. Weiss, "Vacuum arc deposition of conductive wear
resistant coatings on polymer substrates", Proc. Int. Conf. on
Metallurgical and Protective Coatings and Thin Films, ICMCTF-99, San-Diego,
USA, 12-16 April 1999.
117.
N. Parkansky, B. Alterkop, S. Goldsmith, R.L. Boxman, "The
effect of an electric field on the high temperature oxidation of copper in
air", Int. Conf. on Metallurgical and Protective Coatings and Thin Films,
ICMCTF-99, San-Diego, USA, 12-16 April 1999.
118.
R.L. Boxman, S.
Goldsmith, V. Zhitomirsky, B.-Z. Weiss, I. Grimberg, and L. Rapoport,
“Deposition of multi-layer and multi-component hard coatings using a multi-cathode
vacuum arc deposition system”, European Material Conference (E-MRS 1999 Spring
Meeting),
119.
I. I.
Beilis, R.L. Boxman, S. Goldsmith, “The hot refractory anode vacuum arc and
application for metallic film deposition”, Proceeding of the Third IPSTA, Beer
Sheva, Ben-Gurion University, February, vol. 3, 2000, (p.15).
120.
V.N. Zhitomirsky, I. Grimberg, L. Rapoport,
R.L. Boxman, S.Goldsmith, B.Z. Weiss, “Bias Voltage Effect on the Structure and
Properties of Vacuum Arc Deposited TiN Coatings”, Int. Conf. on
Metallurgical and Protective Coatings and Thin Films, ICMCTF-2000, San-Diego,
USA, 10-14 April 2000.
121.
I.I. Beilis, R.L. Boxman, S. Goldsmith, “The Hot Refractory
Anode Vacuum Arc – A New Plasma Source for Metallic Film Deposition”, Int.
Conf. on Metallurgical and Protective Coatings and Thin Films, ICMCTF-2000,
122.
N. Parkansky, V.N. Zhitomrisky, B. Alterkop, S. Goldsmith, R.L.
Boxman, Y. Rosenberg, and Z. Barkay, “Effect of Transverse Current
Injection During Vacuum Arc Deposition of TiN”, Int. Conf. on Metallurgical and
Protective Coatings and Thin Films, ICMCTF-2000, San-Diego, USA, 10-14 April
2000.
123.
N. Parkansky, B. Alterkop, S. Goldsmith, R.L. Boxman, H. Wulff,
M. Quaas, A. Quade, “Electric Field Nano-organization of Thin Titanium Films
During Vacuum Arc Deposition”, Int. Conf. on Metallurgical and Protective
Coatings and Thin Films, ICMCTF-2000, San-Diego, USA, 10-14 April 2000.
124.
R.L. Boxman, " Vacuum Arc Deposition: Early History and Recent Developments ", INVITED DYKE AWARD LECTURE, XIXth Int. Symposium on Discharges and Electrical Insulation in Vacuum, Xi'an,
September 2000, pp. 1-8.
125.
I.I. Beilis, R.L. Boxman, and S. Goldsmith, “A Non-stationary
Model for Vacuum Arcs with a Refractory Hot Anode”, XIXth Int. Symposium on Discharges
and Electrical Insulation in Vacuum,
126.
E. Gidalevich, S. Goldsmith, and R.L. Boxman, “An Upper Limit
for the Electric Current for Shock-free Plasma Flow in a Vacuum Arc”, XIXth Int. Symposium on Discharges
and Electrical Insulation in Vacuum, Xi'an, September 2000, pp. 268-272.
127.
V.N. Zhitomirsky,
O. Zarchin, S.G. Wang, R.L. Boxman, and S. Goldsmith, “Ion Current Distribution
Produced by a Vacuum Arc Carbon Plasma Source”, XIXth Int. Symposium
on Discharges and Electrical Insulation in Vacuum,
128.
V.N. Zhitomirsky, O. Zarchin, R.L. Boxman and S. Goldsmith, “Properties of coatings deposited
using a filtered vacuum arc carbon plasma source” Israel-Japan Binational Workshop on Diamond Science and
Technology, Tosayamada (
129.
R.L. Boxman, “Vacuum Arc Deposition of Coatings and Thin Films”,
Society for the Advancement of Material and Process Engineering – 9th Israeli Technical Conference,
130.
I. I.
Beilis, A. Nemirovsky, S. Goldsmith and R.L. Boxman “Thermal model of a hot
refractory anode in a vacuum arc. Two-dimensional solution”, Proceeding of the
5th IPSTA, Rehovot, Weizmann Institut,
131.
I.I. Beilis, A.
Nemirovsky, S. Goldsmith, and R.L. Boxman, “Two dimensional thermal model of a
refractory anode in a vacuum arc”, XXth Int. Symposium on Discharges
and Electrical Insulation in Vacuum,
132. V.N. Zhitomirsky, O. Zarchin, R.L. Boxman, and S. Goldsmith, “Transport of a vacuum arc produced plasma beam in a magnetized cylindrical duct”, XXth Int. Symposium on Discharges and Electrical Insulation in Vacuum, Tours, July 2002, pp. 670-673.
133.
N. Parkansky, R.L.
Boxman, S. Goldsmith, B. Alterkop, Y. Lereah, Z. Barkay, “Carbon Nanotube
Production during Short Arc Pulses in Air”21st Israel Vacuum Society
General Conference, 11-12 September 2002, Tel Aviv.
134.
R.L. Boxman, V.
Zhitomirsky, S. Goldsmith, T. David “Deposition of SnO2 Coatings
uings a Rectangular Filtered Vacuum Arc Source”, The 6th Israeli
Conference on Plasma Science and Applications, 12 Feb 2003,
135.
N. Parkansky, R.L.
Boxman, B. Alterkop, Y. Lereah, and Z. Barkay, “Synthesis of Carbon
Nanostructures Using Microsecond Pulsed Arcs”. The 6th Israeli
Conference on Plasma Science and Applications, 12 Feb 2003,
136.
I.I. Beilis,A.
Shashurin, D. Arbilly, S. Goldsmith, and R.L. Boxman, “Hot refractory Anode
Vacuum Arc Deposition of Copper Films” The 6th Israeli Conference on
Plasma Science and Applications, 12 Feb 2003,
137.
T. David, S. Goldsmith, R.L. Boxman, “Electro-Optical and Structural Properties of
Thin ZnO Films Prepared by Filtered Vacuum Arc Deposition”, The 6th Israeli Conference on
Plasma Science and Applications, 12 Feb 2003,
138.
I. I. Beilis, A. Shashurin, D. Arbilly, S. Goldsmith and R. L.
Boxman, “Copper
film deposition by a hot refractory anode vacuum arc”, Int. Conf. on
Metallurgical and Protective Coatings and Thin Films, ICMCTF-2003, San-Diego,
USA, 28 April-2 May 2003.
139.
T. David, S. Goldsmith, R.L. Boxman, “Electro-Optical and Structural Properties of
Thin ZnO Films Prepared by Filtered Vacuum Arc Deposition” Int.
Conf. on Metallurgical and Protective Coatings and Thin Films, ICMCTF-2003,
140. R.L. Boxman, V. Zhitomirsky, S. Goldsmith, T. David, V. Dikhtyar, “Deposition of SnO2 Coatings using a Rectangular Filtered Vacuum Arc Source”, Society of Vacuum Coaters Technical Conference, San Francisco, USA, 3-8 May 2003.
141. I.I. Beilis, S. Goldsmith, and R.L. Boxman, “Physical phenomena in a hot refractory anode vacuum arc equation”, 49th Annual Meeting of the Israel Physical Society, 21 December 2003, (Bull. Is. Phys. Soc. 49, p. 112, 2003) invited lecture.
142.
R.L. Boxman, N. Parkansky, “Pulsed arc synthesis of nano-materials”,
Israel Materials Engineering Conference, 24-25 December 2003,
143.
I. I. Beilis, A. Shashurin,
A. Nemirovsky, S. Goldsmith and R.L. Boxman, “Temperature
distribution in an asymmetric molybdenum anode of a refractory anode vacuum arc”,
7th Israeli Conference on Plasma Science and Applications, 1
Feb. 2004, Tel Aviv.
144.
I.I. Beilis, A. Shashurin, A. Nemirovsky,
S. Goldsmith and R.L. Boxman, Temperature of
an asymmetric graphite anode in a refractory anode vacuum arc, 7th Israeli
Conference on Plasma Science and Applications, 1 Feb. 2004, Tel Aviv.
145.
V.N. Zhitomirsky, R.L. Boxman, S. Goldsmith, “Transport of a vacuum arc plasma beam through the aperture
of an annular anode”, 7th Israeli Conference on Plasma
Science and Applications, 1 Feb. 2004, Tel Aviv.
146.
I.I. Beilis, A. Shashurin, Y. Sivan, S.
Goldsmith and R.L. Boxman, “Copper film deposited
by a hot refractory anode vacuum arc and a magnetically filtered vacuum arc”,
7th Israeli Conference on Plasma Science and Applications, 1
Feb. 2004, Tel Aviv.
147. T. David, S. Goldsmith, R.L. Boxman, “p-type Sb-doped ZnO thin films prepared with filtered vacuum arc deposition”, 7th Israeli Conference on Plasma Science and Applications, 1 Feb. 2004, Tel Aviv.
148. I.I. Beilis, A. Shashurin, A. Nemirovsky, S. Goldsmith and R.L. Boxman. Thermal Regime of Asymmetric Anode in a Hot Refractory Anode Vacuum Arc. 31th International Conference on Metallurgical Coatings and Thin Films, USA, San Diego, April 19-23, 2004, B2-1-10, p.34.
149.
V.N. Zhitomirsky, R.L.
Boxman, S Goldsmith, “Influence of the aperture diameter on plasma
transport through the annular anode of a vacuum arc plasma deposition system”,
Int. Conf. on Metallurgical Coatings and Thin Films, 19-23 April 2004,
San-Diego.
150.
T. David, S. Goldsmith, and R.L. Boxman, “Dependence of ZnO
Thin Films Properties on Filtered Vacuum Arc Deposition Parameters” Int. Conf. on Metallurgical Coatings and
Thin Films, 19-23 April 2004, San-Diego.
151.
T. David, S. Goldsmith,
R.L. Boxman, “p-type Sb-doped ZnO films prepared with filtered vacuum arc
deposition” Society of Vacuum Coaters Technical Conference, 24-29 April 2004,
Dallas.
152.
N. Parkansky, R.L. Boxman, I. Zontag, B. Alterkop,
Y. Lereah, Z. Barkay, “Pulsed Arc Synthesis of Carbon Nanotubes in
Air” Nano 8, 28 June-12 July 2004, Venice, Italy.
153.
N. Parkansky, R.L.Boxman, B. Alterkop,
S. Goldsmith, Y. Lereah, Z. Barkay, Yu. Rosenberg,
G. Frenkel, O. Goldstein, “Pulsed Arc Synthesis of Carbon Nano-particles in
Ethanol”, Nano 8, 28 June-12 July 2004,
154.
R.L.
Boxman, “A Tutorial on Vacuum Arc Deposition: Physical Principles and
Engineering Realization” Workshop on Surface Engineering for Hard Coatings, 4-8
July 2004,
155.
I.I.
Beilis, A. Shashurin, A. Nemirovsky, S. Goldsmith, R.L. Boxman, “Measurements
of the Molybdenum Anode Temperature in a Hot Refractory Anode Vacuum Arc”,
XXIth Inter. Symp. on Discharges and Electrical Insulation in
156.
R.L.
Boxman, I.I. Beilis, E. Gidalevich, V. Zhitomirsky, “Magnetic Control in Vacuum
Arc Deposition – a Review”, XXIth Inter. Symp. on Discharges and Electrical
Insulation in
157.
I.I.
Beilis, A. Shashurin, A. Nemirovsky, S. Goldsmith, R.L. Boxman, “Deposition and
Temperature Measurements in A Hot Refractory Anode Vacuum arc with Different
Anode Materials”, 23rd IVS. Annual Conference and Technical Workshop, Tel Aviv,
September, 2004, p. P-TF-7.
158.
I.I. Beilis,
A. Shashurin, A. Nemirovsky, S. Goldsmith, R.L. Boxman, “Thin film Deposited by
a Hot Refractory Anode Vacuum arc with Graphite and molybdenum Anodes”, The
Conference Coatings and Thin Films, Holon Academic Institute of Technology,
Holon, October, 2004.
159.
A.
Shashurin, I.I. Beilis, R.L. Boxman, S. Goldsmith, “Thin film Deposited by a
Hot Refractory Anode Vacuum arc in a Presence of Background Gas”, Proceeding of
the 8th IPSTA, The College of Judea and Samaria, Ariel, 23 January, 2005,
(p.44).
160.
I.I.
Beilis, A. Shashurin, R.L. Boxman and S. Goldsmith, “The background gas
pressure influence on the thin film deposition and ion current in a Hot
Refractory Anode Vacuum Arc”, International Conference on Metallurgical
Coatings and Thin Films, San Diego USA, 2 - 6 May, 2005, p.24.
161.
I.I.
Beilis, A. Shashurin, A. Nemirovsky, R.L. Boxman and S. Goldsmith, “Plasma heat
flux to asymmetric anodes in a Hot Refractory Anode Vacuum Arc”, 17th International Symposium on Plasma Chemistry-2005, Canada, Toronto, 7-12 August,
CACT FASE University of Toronto, 2005, p.34.
162.
N. Parkansky, Y. Orkabi, T. Halperin, D. Cohen, N. Orr,
R. Boxman, “Pulsed Submerged Arc Sterilization of Water” First Mid-East Conference on Ultraviolet Technologies, Tel Aviv, November 20-22, 2005.
163.
164.
A.
Shashurin, I.I. Beilis, R.L. Boxman and S. Goldsmith “Time Dependent Total Ion
Current Measurement in a Vacuum Arc with Refractory Anode”, 9th Israeli Conference on Plasma Science and Applications”, Ein Gedi, 2 March 2006.
165.
R.L. Boxman, N. Parakansy, I. Zontag, O. Goldstein, B. Alterkop
and G. Frenkel, “Pulsed arc synthesis of carbon nano-tubes and other nano-materials”, France-Israel Symposium on Diamond, Carbon
Nano-structures and Related Materials, Ein Bokek- Israel. March 6-7, 2006.
166.
R.L. Boxman, V.N.
Zhitomirsky, Z. Abunie, “Surface
Resistivity Distribution of SnO2 Coatings Deposited Using a
Rectangular Filtered Vacuum Arc Deposition System”, Society of Vacuum Coaters
Technical Conference, 22-27 April 2006,
167.
V.N. Zhitomirsky, E. Çetinörgü, E. Adler, Yu. Rosenberg,
R.L. Boxman and S. Goldsmith, “Filtered Vacuum Arc Deposition of Transparent Conducting Al-doped ZnO
Films” Int.
Conf. on Metallurgical Coatings and Thin Films, 30 April-5 May 2006, San-Diego.
168.
Eda
Çetinörgü, S. Goldsmith, R.L. Boxman, “Effects of
Deposition Conditions on the Characteristics of Highly Transparent and
Conducting ZnO-SnO2 Thin Films Deposited by Filtered Vacuum Arc”, Int. Conf. on Metallurgical Coatings and Thin
Films, 30 April-5 May 2006, San-Diego.
169.
A. Shashurin, I.I.
Beilis, Y. Sivan, S. Goldsmith, and R.L. Boxman, “Copper Film Deposition by Hot
Refractory Anode and Magnetically Filtered Vacuum Arc Deposition”, Int. Conf.
on Metallurgical Coatings and Thin Films, 30 April-5 May 2006, San-Diego.
170.
S. Goldsmith and R.L.
Boxman, “Filtered Vacuum Arc Deposition of Undoped and Doped ZnO Thin Films:
Electrical, Optical, and Structural Properties”, Int. Conf. on Metallurgical
Coatings and Thin Films, 30 April-5 May 2006, San-Diego. INVITED PAPER.
171.
R.L. Boxman, V. Zhitomirsky, S. Goldsmith, “Vacuum Arc
Deposition of Hard and Superhard Coatings”, VI-th Int. Conf. on Ion
Implantation and other Applications of Ions and Electrons (ION 2006),
172.
I. I. Beilis, A. Shashurin, R.L. Boxman,
"Measurement of Ion Flux as a Function of Background Gas Pressure in a Hot
Refractory Anode Vacuum Arc”, Int. Symposium on Discharges and Electrical Insulation in Vacuum,
Matsue, Japan, September, 25-29, 2006.
173.
D. Gindin, N. Parkansky, R. Boxman, A. Moshkovith, V. Perfiliev,
L. Rapoport, Yu.
174. I.I. Beilis, D. Grach, A. Shashurin, and R.L. Boxman, “Copper Metallization of Trenches on a Si Wafer Using a Hot Refractory Anode Vacuum Arc”, 10th Israeli Conference on Plasma Science and Applications, 27 March 2007, Beer Sheva.
175. I.I. Beilis, A. Shnaiderman, A. Shashurin, S. Goldsmith, and R.L. Boxman, “Vacuum Arc with Tungsten Anode: Anode Temperature and Film Deposition”, 10th Israeli Conference on Plasma Science and Applications, 27 March 2007, Beer Sheva.
176. Eda Çetinörgü, S. Goldsmith,and R.L. Boxman, “Effects of Deposition Conditions on the Characteristics of Highly Transparent and Conducting ZnO-SnO2 Thin Films Deposited by Filtered Vacuum Arc” Int. Conf. on Metallurgical Coatings and Thin Films, 23-27 April 2007, San-Diego.
177. I.I. Beilis, D. Grach, A. Shashurin, and R.L. Boxman, “Filling trenches on a SiO2 substrate using a hot refractory anode vacuum arc” Int. Conf. on Metallurgical Coatings and Thin Films, 23-27 April 2007, San-Diego.
178. I. I. Beilis, A. Shnaiderman, A. Shashurin, R.L. Boxman and S. Goldsmith, “Copper film and anode temperature distribution measurements in a vacuum arc with tungsten anode”, Int. Conf. on Metallurgical Coatings and Thin Films, 23-27 April 2007, San-Diego.
179. R.L. Boxman, N. Parkansky, Y. Orkabi, M. Meirovitz, E. Gidalevich, B. Alterkop, T. Halperin, N. Orr, S. Cheskis, H. Mamane, Dror Avisar, and D. Cohen, “Submerged Arc Plasma Water Treatment: Disinfection and Chemical Decontamination”, NATO Adv. Study Inst. on Plasma Decontamination, Cesme (Turkey), 16-26 September 2007.
180.
I.I. Beilis, A.
Shnaiderman, and R.L. Boxman, “Chrome film deposition by a Hot Refractory Anode Vacuum Arc plasma source”, 26th Israel Vacuum Society Conf., Herzliya, 18 Oct. 2007.
181.
I.I. Beilis, D.
Grach, A. Shashurin, R.L. Boxman, “Filling trenches on a SiO2 substrate with Cu by a Hot Refractory Anode Vacuum Arc plasma source” 26th Israel Vacuum Society Conf., Herzliya, 18
Oct. 2007.
182.
I.I. Beilis, Y. Koulik, D.
Arbilly and R.L. Boxman, “Aluminum film deposition by an expanding plasma from
a Hot Refractory Anode Vacuum Arc” The 54th meeting of the IPS, BGU
of Negev, vol. 54, 2008, 28, (07-1).
183.
I.I. Beilis, A. Shnaiderman, R.L. Boxman, “Chromium and Titanium Film Deposition Using a Hot Refractory Anode Vacuum
Arc Plasma Source” Int.
Conf. on Metallurgical Coatings and Thin Films, 28 April -2 May 2008,
San-Diego.
184.
S. Goldsmith and R.L. Boxman,
“Transparent
Conducting Oxide Thin Films:
Physics, Current Status, and Future Prospects” Thin Films 2008, 14-16 July
2008,
185.
V.N. Zhitomirsky, A. Raveh, R.L. Boxman, “Vacuum Arc Plasma Beam Produced
From an Erbium Cathode”, Int.
Symposium on Discharges and Electrical Insulation in Vacuum,
186.
I.I. Beilis, D. Grach,
R.L. Boxman “Producing Cu Interconnections on a Si
Substrate using a Hot Refractory Anode Vacuum Arc”, Int. Symposium on Discharges and Electrical
Insulation in Vacuum, Bucharest, 15-19 September 2008.
187.
I. Zukerman, V.N. Zhitomirsky, A. Raveh, R.L.
Boxman, S.K. Kim, “Zirconium and aluminum arc behavior and ion current
generation during metal and oxide deposition”, The 11th Israeli
Conference on Plasma Science and Applications, Jerusalem, 1 February 2009.
188.
I.I.
Beilis, Y. Koulik, D. Arbilly and R.L. Boxman, “Aluminum film deposition using
a vacuum arc with graphite anode The 11th Israeli Conference on Plasma Science and Applications, Jerusalem, 1 February
2009,
P-18.
189.
N. Parkansky,
R.L. Boxman, B. Alterkop, Z. Barkay, Yu. Rosenberg, G.
Leitus, N. Eliaz, V. Filler “Pulsed
submerged discharge production of carbon and metal nanoparticles” 5th Workshop
of the
190.
I. Zukerman, V.N.
Zhitomirsky, G. Beit-Ya'akov, R.L. Boxman, A. Raveh, S.K. Kim, “Zirconium and
Aluminum Cathodic Vacuum Arc Behavior and Ion Current Generation During Metal
and Oxide Deposition”, Int. Conf. on Metallurgical Coatings and Thin Films,
ICMCTF-2009, San-Diego, USA, 27 Apr.-1 May 2009.
191.
S.K.
Kim, V.V. Le, J.W. Lee, R.L. Boxman and V.N. Zhitomirsky, "Deposition of ZrO2/Al2O3 thin
films by cathodic arc plasma deposition", Int. Conf. on
Metallurgical Coatings and Thin Films, ICMCTF-2009, San-Diego, USA, 27 Apr.-1
May 2009.
192.
I.I. Beilis and R.L.
Boxman, "Metallic film deposition
using a vacuum arc plasma source with a refractory anode", Int.
Conf. on Metallurgical Coatings and Thin Films, 27 April -1 May 2009, San-Diego, INVITED
LECTURE.
193.
R.L. Boxman "Vacuum Arc Deposition of Coatings
and Thin Films", Innovations in Thin Film Processing and
Characterisation, November 17-20, 2009 - Nancy (
194.
I. I. Beilis, Y.
Koulik, R.L.
Boxman, D. Arbilly "Thin film deposition using a plasma source with a hot
refractory anode vacuum arc", Israel Materials Engineering Conference
(IMEC-14), 12-14 Dec. 2009, Tel Aviv.
195.
I. Zukerman1, G. Beit-Ya'akov, V.N.
Zhitomirsky, A. Raveh, R.L. Boxman, "Vacuum
arc deposition of Al2O3-ZrO2 coatings: arc behavior and coating
characteristics", Israel Materials Engineering Conference (IMEC-14), 12-14
Dec. 2009, Tel Aviv.
196.
I.I. Beilis, Y. Koulik, R.L.
Boxman and D. Arbilly, “Volatile metal film deposition using a vacuum arc with
a refractory anode” Proceeding of the 12th IPSTA, Technion,
197.
R.L. Boxman, E. Yaari, V.
Dikhtyar, E. Gidalevich, V. Zhitomirsky, “Clear etalon windows for domestic
microwave ovens: analysis and measurement”, International Microwave Power
Institute Annual Symposium, Denver, 14-16 July 2010.
198.
I.I. Beilis, Y. Koulik, R.L. Boxman, “Temperature
Distribution Dependence on Refractory Anode Thickness in a Vacuum Arc”, 24th
International Symposium on Discharges and Electrical Insulation in Vacuum,
199.
R.L. Boxman, S.K. Kim,
V.N. Zhitomirsky, I. Zukerman, G. Beit‑Ya’akov, “Vacuum
Arc Deposition of Nano-structured Alumina/Zirconia Films” Twelfth International
Conference on Plasma Surface Engineering, Garmisch-Partenkirchen, Germany, 13-17 September 2010.
200.
Y. Koulik,
I.I. Beilis, R.L. Boxman, "Refractory Anode Temperature Measurement in a Vacuum
Arc" The 56th meeting of the IPS, vol. 56, 25, (PN-78), Tel Aviv 2010.
201.
E. Gidalevich, R. L.
Boxman, “ELECTROMAGNETIC WAVE PLASMA EXCITATION AND PROPAGATION”, 13th Israeli Conference on Plasma Science and its Applications, Ariel, February 10,
2011.
202.
I. Chayun, E.
Çetinörgü-Goldenberg, Rudi Avni, and R.L. Boxman, “THE EFFECT
OF NITROGEN PARTIAL PRESSURE AND SUBSTRATE TEMPERATURE ON THE NITROGEN
CONCENTRATION IN FILTERED VACUUM ARC DEPOSITED N:TiO2 THIN FILMS”, 13th Israeli Conference on Plasma Science and its Applications, Ariel, February 10,
2011.
203.
O. Goldberg, V.N.
Zhitomirsky, R.L. Boxman, “FILTERED ZR VACUUM ARC DEPOSITION IN A LOW PRESSURE
O2 + ARGON ATMOSPHERE”, 13th Israeli Conference on Plasma
Science and its Applications, Ariel, February 10, 2011.
204.
Y. Koulik, I.I. Beilis, R.L. Boxman, “CALCULATION OF THE PLASMA HEAT FLUX AND
TEMPERATURE DISTRIBUTION IN HOT REFRACTORY ANODE VACUUM ARCS”, 13th Israeli Conference on Plasma Science and its Applications, Ariel, February 10,
2011.
205.
N. Parkansky, A. Vegerhof,
B. Alterkop, O. Berkh, R.L. Boxman, “SUBMERGED ARC BREAKDOWN OF
METHYLENE BLUE (MB) IN AQUEOUS SOLUTIONS”, 13th Israeli Conference
on Plasma Science and its Applications, Ariel, February 10, 2011.
206.
R.L. Boxman “VACUUM
ARC DEPOSITION: Physical
Principles and Engineering Realization”, International Conference on Plasmas
from Radio Frequency Discharges”,
207.
E. Gidalevich and R.L. Boxman “ELECTROMAGNETIC WAVE PLASMA EXCITATION AND
PROPAGATION”, Physical Principles and Engineering
Realization”, International Conference on Plasmas from Radio Frequency
Discharges”,
208.
N. Parkansky, G. Leitus B. Alterkop, Z. Barkay, Yu.
209.
V.N. Zhitomirsky,
E. Çetinörgü-Goldenberg, and R.L. Boxman, “Review of
Tribological Coatings: Deposition Methods, Materials, and Applications”,
Tribology for Industry,
210.
I.
Zukerman, G. Beit-Ya'akov, V.N. Zhitomirsky, S.K. Kim, A. Raveh, R.L. Boxman “Characteristics of nano-composite Al2O3-ZrO2 coatings deposited by Vacuum Arc Deposition” 6th Symposium of Functional
Coatings and Surface Engineering, Montreal, June 5-8, 2011.
211.
R.L. Boxman, E. Yaari, V. Dikhtyar, E. Gidalevich, V.
Zhitomirsky, “Clear etalon windows for domestic microwave ovens: analysis and
measurement” 13th International Conference on Microwave and RF
Heating (AMPERE 2011), pp. 286-289, Toulouse, 5-8 September 2011.
212.
E. Gidalevich
and R.L. Boxman, “RF Radiation–Ar Plasma Interaction: modeling
propagation, absorption and reflection” 13th International
Conference on Microwave and RF Heating (AMPERE 2011), pp. 419-421,
213.
I. Chayun-Zucker, E. Çetinörgü-Goldenberg,
R. Avni, and R.L. Boxman: The Effect of Nitrogen Partial Pressure and Substrate
Temperature on the Characteristics of Filtered Vacuum Arc Deposited N:TiO2
Nano-structured Photocatalytic Thin Films, Tel Aviv University Center for
Nanoscience and Nanotechnology Annual Workshop, Hagoshrim,
Israel, 1-2 Feb. 2011.
214.
I. Chayun-Zucker, E. Çetinörgü-Goldenberg,
R. Avni, and R.L. Boxman: Water treatment by photocatalytic effect under
visible light, Israeli Water Association Conference,
215.
I. Zukerman, A. Raveh, R. L. Boxman, “Nanocomposite ZrO2/Al2O3 Coatings Deposited by Reactive Pulsed-DC Magnetron Sputtering”, The 15th Israel Materials Engineering Conference (IMEC) February 28th- March
1st, 2012, Dead Sea, Israel.
216.
E. Cetinorgu-Goldenberg, I. Zukerman, V.N. Zhitomirsky, A. Raveh,
R.L. Boxman, “Deposition of Er2O3 coatings using Filtered
Vacuum arc”, The 15th Israel Materials Engineering Conference (IMEC)
February 28th- March 1st, 2012, Dead Sea, Israel.
217.
Y. Koulik,
I.I. Beilis, R.L. Boxman, “Anode Thicknesses Influence on the Ion Current in a
Vacuum Arc with Refractory Anode” Proceeding of the 14th IPSTA, Weizmann
Institute of Science, Rehovot, 28 February, 2012, p.24.
218.
E. Gidalevich, R. L. Boxman,
“Microwave Excitation of Submerged Plasma”, 8th International Symposium on Non-Thermal/Thermal
Plasma, Pollution Control Technology & Sustainable Energy, Camaret-sur-Mer,
FRANCE, 25-29 June 2012.
219.
N. Parkansky, A. Vegerhof, E.
Faktorovich-Simon, B. Alterkop, O. Berkh, R.L. Boxman, Electrode Material
Effect on Submerged Arc Breakdown of Methylene Blue in Aqueous Solutions, 8th
International Symposium on Non-Thermal/Thermal Plasma, Pollution Control
Technology & Sustainable Energy, Camaret, FRANCE, 25-29 June 2012.
220.
E. Gidalevich, R. L. Boxman,
Steady-State Plasma Bubbles Excited by Microwave Radiation, 2nd Global Congress on Microwave Energy Applications, July 23-27, 2012, Long Beach,
CA. USA.
221.
I. Zukerman, A. Raveh, R.L. Boxman, T. Poirie, R. Vernhes,
J.E. Klemberg-Sapieha, L. Martinu, “Thermal Stability of Nanocomposite ZrO2/Al2O3 Coatings Deposited by Reactive Pulsed-DC Magnetron Sputtering”, The 6th International Conference on Technological Advances of Thin Films & Surface
Coatings, July 14th-17th, 2012, Singapore, Singapore.
222.
R.L. Boxman “Integrating graphic and textual elements in scientific writing” Second International Conference on Academic
Writing, July 31 – August 1, 2012, Tel Aviv.
223.
I.I. Beilis, Y. Koulik and R.L. Boxman, Effective Cathode Voltage and Ion Current
Measurements in a Vacuum Arc with a Black Body Electrode Configuration, 24th
International Symposium on Discharges and Electrical Insulation in Vacuum, Tomsk,
Russia, 3-7 September 2012.
224.
I.I. Beilis, Y. Koulik and R.L. Boxman, Sn Thin Film
Deposition Using a
Hot Refractory Anode Vacuum Arc, 13th International Conference on Plasma Surface Engineering, Garmisch-Partenkirchen, Germany, 10-14 September 2012.
225.
N. Parkansky,
E Faktorovich-Simon, A. Vegerhof, B. Alterkop, O. Berkh,
R.L. Boxman, Z. Barkay, Y. Rosenberg, L. Burstein,
A. Khatchtouriants, Submerged Arc Production of Nanoparticles and
Breakdown of Methylene Blue, 13th International Conference on Plasma Surface Engineering,
226.
N. Parkansky,
G. Leitus, B. Alterkop, R.L. Boxman, Z. Barkay,
Y. Rosenberg, Submerged Arc Synthesis of Magnetic Nanoparticles, 13th International Conference on Plasma
Surface Engineering, Garmisch-Partenkirchen,
Germany, 10-14 September 2012.
227.
E.
Goldenberg, L. Burstein, I. Zucker, R. Avni, R.L Boxman, The Effect of Nitrogen
Partial Pressure and Substrate Temperature on the Characteristics of Filtered
Vacuum Arc Deposited N:TiO2 Thin Films, 13th International Conference on Plasma
Surface Engineering, Garmisch-Partenkirchen,
Germany, 10-14 September 2012.
228.
B. Sagi, I.I. Beilis, V.
Zhitomirsky, O. Margulis, and R.L. Boxman, Experimental Study of Cathode Spot
Motion in a Vacuum Arc with a Long Rectangular Roof-shaped Cathode. The 3nd Department of Physical Electronics Conference,
229.
E. Faktorovich-Simon, N.
Parkansky, V. Yacubov, B. Alterkop, O. Berkh, R. L. Boxman, Z. Barkay, Yu.
Rosenberg, L. Burstein, A. Khatchtouriants, Electrode erosion effect on
decomposition of methylene blue in aqueous solutions, 15th Israeli Conference
on Plasma Science and Applications, Holon, Israel, 4 Feb. 2013.
230.
E.
Gidalevich & R. L. Boxman, RF Excited Plasma Bubbles In Water, 15th Israeli Conference on Plasma Science and
Applications, Holon, Israel, 4 Feb. 2013.
231.
I.I. Beilis, Y. Koulik,
R. L. Boxman, Effective Cathode Voltage Increase in a Vacuum Arc with a Black
Body Electrode Configuration, 15th Israeli Conference on Plasma Science and
Applications, Holon, Israel, 4 Feb. 2013.
232.
B. Sagi, I.I. Beilis, V.
Zhitomirsky, O. Margulis, and R. L. Boxman, Experimental Study of Cathode Spot
Motion in a Vacuum Arc with a Long Rectangular Roof-shaped Cathode, 15th
Israeli Conference on Plasma Science and Applications, Holon, Israel, 4 Feb.
2013.
233.
D. Tsimanis and R. L.
Boxman, “Microwave Plasma Excitation for a Lighting Application. 15th Israeli
Conference on Plasma Science and Applications”, Holon, Israel, 4 Feb. 2013.
234.
D. Tsimanis and R. L.
Boxman, “Microwave excitation of an electrical
discharge plasma for lighting application” Int. Microwave Power Institute’s 47th
Microwave Power Symposium, Providence RI, USA, June 2013.
235.
236.
N. Parkansky, E.
Faktorovich-Simon, V. Yacubov, B. Alterkop, O. Berkh, R.L. Boxman,
Z. Barkay, Yu. Rosenberg, L. Burstein, A. Khatchtouriants, “Effect of Micro- and Nano-particles on
Submerged Arc Decomposition of Methylene”, Int. Symp. on Plasma Chem, Cairns,
QLD, Australia, Aug. 2013.
237.
R.L. Boxman*, J. Mohammed
Ibrahim, I. S. Falconer, A. Israel, A.E. Ross and D.R. McKenzie, “Development
of a Pulsed Glow Discharge”, Proceeding of the 16th Israeli Plasma Science and Applications
Conference, Tel Aviv, 5 February, 2014, pp. 9-10.
238.
B. Sagi, I.I. Beilis, V. Zhitomirsky, and R.L. Boxman,
Cathode Spot Dynamics in a Vacuum Arc with an Oblong Roof Shaped Cathode in a
Magnetic Field, Proceeding of the The 16th Israeli Plasma Science and Applications Conference, Tel
Aviv, 5 February, 2014, p.47-48.
239.
V.
Yakubov-Tal, N. Parkansky, R.L. Boxman, Effect of Electrode Materials (Produced
Micro- and Nano-particles)on the Decomposition of Methylene Blue in Aqueous
Solution by a Submerged Arc, The 16th Israeli Plasma Science and Applications
Conference (IPSTA-2014), Tel Aviv University, Feb. 5th, 2014.
240.
A.
Meirovich, N. Parkansky, R.L. Boxman, Submerged pulse arc treatment of water
with organic compound methylene blue,
The 16th Israeli Plasma Science and Applications Conference (IPSTA-2014), Tel
Aviv University, Feb. 5th, 2014
241.
I. Zukerman,
A. Raveh, R.L. Boxman “Tribological Properties of Nanocomposite ZrO2-Al2O3 Coatings,
Israel Materials Engineering Conference, Haifa, February 2014.
242.
N. Parkansky, V. Yacubov, B. Alterkop,
O. Berkh, R.L. Boxman, Z. Barkay, Yu. Rosenberg,
“Effect of Electrode
Material on the Removal of Organic Contamination from Water by Submerged Arc
Treatment”, COST TD1208 Annual meeting, “Electrical
discharges with liquids for future applications,” Lisboa, 10-13 March 2014.
243.
N. Parkansky, G. Leitus, B. Alterkop,
R.L. Boxman, Z. Barkay3, Yu. Rosenberg,
“Magnetic
Properties of Ni-C Powder Synthesized by a Submerged Pulsed Arc” COST
TD1208 Annual meeting, “Electrical discharges with liquids for future
applications,” Lisboa, 10-13 March 2014.
244.
N. Parkansky and R. Boxman, “Submerged Pulsed Arc Synthesis
of Nanoparticles & Decomposition of Organic Pollutants in Water”, Int.
Conference on Metallurgical Coatings, and Thin Films, San Diego, CA, 28 April –
2 May, 2014. Invited paper.
245.
I. Zukerman, A. Raveh, R.L. Boxman, J.E. Klemberg-Sapieha,
L. Martinu, “Properties of Composite ZrO2-Al2O3 Coatings Deposited by Pulsed-DC Magnetron Sputtering and Filtered Vacuum Arc
Techniques” Int. Conference on Metallurgical Coatings, and Thin Films, San
Diego, CA, 28 April – 2 May, 2014.
246.
I. Zukerman, A. Raveh, R.L. Boxman, J.E. Klemberg-Sapieha,
L. Martinu, “Effect
of Substrate Temperature and Bias Voltage on the Properties of Composite ZrO2-Al2O3 Coatings Deposited by Pulsed-DC Magnetron Sputtering”, Society of Vacuum
Coaters Annual Technical Conference, Chicago, IL, U.S.A., 5-8 May 2014.
247.
M. Press-Yekymov, E. Goldenberg, R.L. Boxman,
“Characterization of Al:ZnO Thin Films Fabricated by Rectangular Filtered
Vacuum Arc Deposition on Large Flat Glass Substrates”, Society of Vacuum Coaters Annual Technical
Conference, Chicago, IL, U.S.A., 5-8 May 2014.
248.
D. Tsimanis and R.L. Boxman, “Electrical characteristics of a plasma
excited by an azimuthal microwave electric field” Int. Microwave Power
Institute’s 48th Microwave Power Symposium, New Orleans, Louisiana, USA, 19-20 June
2014.
249.
E. Goldenberg, M. Press-Yekymov, N. Iddan, and R.L.
Boxman, “Filtered
Vacuum Arc Deposition of Transparent Conducting Films: a Review”, 14th International Conference on Plasma
Surface Engineering, Garmisch-Partenkirchen,
Germany, 14-19 September 2014, invited keynote lecture.
250. I.I. Beilis, B. Sagi, V. Zhitomirsky, R.L. Boxman, “Cathode Spot Motion in a Vacuum Arc with a Long Roof-shaped Cathode”, XXVIth Inter. Symp. on Discharges and Electrical Insulation in Vacuum, India, Mumbai, 28 Sept-3 Oct, 2014, p. 213-216.
251. I.I. Beilis, Y. Koulik, E. Yankelevich, D. Arbilly, R.L. Boxman, “Vacuum Arc Deposition using Refractory Electrodes”, XXVIth Inter. Symp. on Discharges and Electrical Insulation in Vacuum, India, Mumbai, 28 Sept-3 Oct, 2014, p. 513-516.
252.
A.Meirovich,
N. Parkansky, R.L. Boxman, O. Berkh Yu.
253.
N. Parkansky, V. Yacubov, I.I. Beilis, R.L.
Boxman, O. Berkh, Submerged Arc in Methylene Blue Water Solution and Electrode
Erosion, The 17th Israeli Plasma Science and Applications Conference (IPSTA
2015), Ariel, 16 January 2015
254.
A.Meirovich,
N. Parkansky, R.L. Boxman, O. Berkh, Yu.
255.
R.L. Boxman and S. Shchelkunov, “Comparative Leakage of
Transparent Conducting Film Etalon Windows and Standard Metal Grid Windows”
Int. Microwave Power Institute’s 49th Microwave Power Symposium, San Diego, CA,
USA, 17-18 June 2015.
256.
I.I.
Beilis, R.L. Boxman, "Experimental Study of Vacuum Arcs with Refractory
Anodes", MeVARC-5 Workshop, Saariselka, Finnish Lapland, Finland,
September 2-4, 2015 (Invited presentation).
257.
I. Zukerman, S. Hayun, R.L.
Boxman, A. Raveh, "Thermal Stability of ZrO2-Al2O3 Coatings Deposited by Pulse-DC Magnetron Sputtering", The 33rd Israel
Vacuum Society conference (IVS), 9th September 2015, Weizmann
Institute of Science, Rehovot.
258.
I. Zukerman, S. Hayun, R.L.
Boxman, A. Raveh, " Thermal Stability of ZrO2-Al2O3 Coatings Deposited by Pulse-DC Magnetron Sputtering", The 10th International Conference on Surfaces, Coatings and Nanostructured Materials
(NANOSAMT) 13th-16th September 2015, Manchester, UK.
259.
Ariel
Meirovich, Naum Parkansky, Raymond L. Boxman, Olga Berkh, “Possibilitly of
Submerged Pulse Arc Treatment of Wastewater with Organic Contaminates in
Multi-electrode Reactor”, The 19th Israeli Conference on Plasma
Science and its Applications, Beer Sheva, Israel, 2 March 2016.
260.
I.I.
Beilis, Y. Koulik, and R.L. Boxman, “Anode Temperature Evolution in a Vacuum
Arc with a Black Body Electrode Configuration”, The 19th Israeli
Conference on Plasma Science and its Applications, Beer Sheva, Israel, 2 March
2016.
261.
I.
Zukerman, S. Hayun, M. Halabi, R.L. Boxman, A. Raveh,
“Segregation as a Driving Force in the Formation of Nanocomposite ZrO2-Al2O3 Coatings”, Society of Vacuum Coaters Annual Technical Conference,
Indianapolis, U.S.A., 10-13 May 2016.
262.
I. Zukerman,
A. Raveh, R.L. Boxman "Comparison
between Nano-composite ZrO2-Al2O3 Coatings
Produced by Pulsed-DC Magnetron Sputtering and Filtered Vacuum Arc Techniques”
3rd USA International Conference on Surfaces, Coatings and Nanostructured
Materials (NANOSMAT-USA), Arlington, Texas (USA), 18-20 May 2016.
263.
R.L.
Boxman, “Microwave Treatment of Garden Soil prior to Planting” IMPI’S 50th ANNUAL MICROWAVE POWER SYMPOSIUM, Orlando, Florida, USA, June 2016
264.
I. Zukerman, S. Hayun, M.
Halabi, R.L. Boxman, A. Raveh “DSC
Analysis of Nanocomposite ZrO2-Al2O3 Coatings” 15th International Conference on Plasma Surface Engineering, Garmisch-Partenkirchen, Germany, 12-16 September 2016.
265.
I. I. Beilis, Y.
Koulik and R. L. Boxman, “Anode Temperature Evolution in a Vacuum Arc
with a Black Body Electrode Configuration”, XXVIIth
Int. Symp. on Discharges and Electrical Insulation in
Vacuum, Suzhou, China, 18-23 September 2016.
266.
I.I. Beilis, Y. Koulik, R.L. Boxman, "Anode Temperature
Measurement in a Vacuum Arc with a Black Body Electrode Assembly" The 62th
meeting of the IPS, TAU, 25 Dec. 2016 (p. 47).
267.
N. Parkansky, A. Meirovich, R.L. Boxman, “Multi-electrode pulsed
submerged arc water treatment”, International Conference on Plasma with Liquids
(ICPL 2017), Prague, Czech Republic, March 5-9, 2017.
268.
N. Parkansky, Z. Barkay, I. Popov, L. Burstein, R. L. Boxman,
“Synthesis of micron-size graphene-like films using a submerged pulsed arc in
ethanol” International Conference on Plasma with Liquids (ICPL 2017), Prague,
Czech Republic, March 5-9, 2017.
269.
I.I. Beilis, Y. Koulik, R.L. Boxman, "Anode Temperature
Measurement in a Vacuum Arc with a Black Body Electrode Assembly"
MeVARC-6, Jerusalem, Israel, 19-23 March, 2017.
Books
1. R.L. Boxman, P. Martin, D. Sanders (editors), Handbook of Vacuum Arc Science and Technology, Noyes Publications (Park Ridge, NJ) 1995.
2. Raymond Boxman and Edith Boxman, Communicating Science: A Practical Guide for Engineers and Physical Scientists, World Scientific Publishing (Singapore) 2017.
Chapters in
Books
1. M. Keidar, I. Beilis, R.L. Boxman, and S. Goldsmith, “Free Magnetohydrodynamic Flow of the Low-Density Vacuum-Arc Cathodic Jet", chapter 65 in H. Branover and Y. Unger (eds), Progress in Fluid Flow Research: Turbulence and Applied MHD, Vol. 182 in Progress in Astronautics and Aeronautics, American Institute of Aeronautics and Astronautics, Reston VI (USA), 1998.
2.
V.N. Zhitomirsky, I.
Grimberg, M.C. Joseph, E. Gidalevich, R.L. Boxman, A. Matthews, S. Goldsmith
and B.Z. Weiss, “Vacuum arc plasma deposition of wear resistant coatings on
polymer substrates”, in K.L. Mittal (ed), Polymer Surface Modification:
Relevance to Adhesion, Vol. 2, VSP,
3.
R.L. Boxman, N. Parkansky, H. Mamane, M. Meirovitz, Y. Orkabi,
T. Halperin, D. Cohen, N. Orr, E. Gidalevich, B. Alterkop and S. Cheskis, "Pulsed Submerged Arc
Plasma Disinfection of Water: Bacteriological Results and an Exploration of
Possible Mechanisms" in S. Güçeri and A. Fridman
(Eds.), Plasma Assisted Decontamination of Biological and Chemical Agents,
Springer, 2008.
Patents (issued)
1. R.L. Boxman, “Triggered Vacuum Gap Device with Means for Reducing the Delay Time to Arc-over the Main Gap”, U.S. patent 3,581,142, May 25, 1971.
2. R.L. Boxman, S. Goldsmith, S. Shalev, H. Yaloz and N. Brosh, “Method and Apparatus for Surface-Treating Workpieces”, U.S. patent 4,645,895, Feb. 24, 1987; Israeli Patent 71530, Dec. 17, 1987. German patent 35 13 014, 24/03/1994. Japanese Patent 1,906,448, Feb. 24, 1995.
3.
M. DeLaurentis, K.
Pourrezaei, R. Boxman and R. Beard, “Urinary Catheter and System”,
4. N. Parkansky, A. Ben-Shalom, R.L. Boxman, L. Kaplan, S. Goldsmith, H. Yaloz, and M. Nathan, “Method of Producing Transparent and Other Electrically Conductive Materials”, U.S. Patent 5,514,229, May 7, 1996.
5. K. Pourrezaei; R.B. Beard; R.L. Boxman; I. Shvets; and M. DeLaurentis, “Method for fabrication of metallized medical devices”, U.S. Patent 5,685,961, Nov. 11, 1997.
6. S. Goldschmidt, P. Avivi, H. Rosental, and R. Boxman, "Process and Apparatus for Producing Diamonds", Israeli Patent 105 951, 10 May 1998.
7. N. Parkansky, A. Ben-Shalom, R.L. Boxman, L. Kaplan, S. Goldsmith, H. Yaloz, and M. Nathan, “Method of Producing Transparent and Other Electrically Conductive Materials”, U.S. Patent 5,795,631, Aug. 18, 1998.
8. I.I. Beilis, R.L. Boxman, S. Goldsmith, M. Keidar, H. Rosenthal, “Deposition of coatings and thin films using a vacuum arc with a non-consumable hot anode”, U.S. Patent 6,391,164, May 21, 2002. Israeli Patent 130650, 21 Feb 2006.
9. R.L. Boxman, S. Goldsmith, Y. David, “Vacuum arc plasma gun deposition system”, U.S. Patent 6,706,157, March 16, 2004.
10.
11. R. Boxman, V. Dikhtyar, E. Gidalevich, V. Zhitomirsky, “Microwave oven window”, U.S. Patent 8,772,687 B2, 8 July 2014.
Thesis
1. “Triggered Vacuum Interrupters”, (S.M. and S.B.), Massachusetts Institute of Technology, Dept. of Electrical Engineering, February 1969.
2. “Interferometric Measurement of Electron and Vapor Densities in a High Current Vacuum Arc”, (Ph.D.), Massachusetts Institute of Technology, Dept. of Electrical Engineering, February, 1973.
