(If you want particular papers and have no access to the journal, email me a request.)
1. Karniel, A. Reich Y., Managing the Dynamics of New Product Development Processes: The New Product Lifecycle Management Paradigm, Springer, 2011.
2. Culley, S., Hicks, B., McAloone, T., Howard, T. Reich, Y., eds., Proceedings of the 18th International Conference on Engineering Design (ICED11), Vol. 2: Theory and Research Methodology. Design Society, 2011.
1. Y.
Reich, “Book review: Exemplar-Based Knowledge Acquisition, by Ray Bareiss. Academic Press,
2. Y. Reich, “From General Design Theory to Community Design Theory.” General Design Theory Workshop, Cambridge, UK, Dec. 11, 1997.
3. Y. Reich, “The (almost) intolerable dynamism of enterprise knowledge management,” Executive, 22, pp. 38–40, 1997. (In Hebrew).
4. Y. Reich, General Design Theory Workshop, Cambridge, UK, 1999.
5. Y. Reich, “Preliminary product design decision-making,” in The Modeling of Synthesis Symposium, 2000.University of Tokyo, Japan, 2000.
6. Y. Reich, “Life-cycle knowledge management.” Department of Industrial Engineering, Graduation Ceremony, Ben Gurion University, June 12, 2001.
7. Y. Reich, “New directions for product concept development.” Keynote lecture, Solidworks World Israel, September 15, Tel Aviv, 2003.
8. Y. Reich, From generic learning tasks to knowledge discovery process management An 18 year journey, Seminar on Computational Learning and Adaptation, Stanford University, October, 13, 2004.
9. O, Shai, Y. Reich, and D. Rubin, “Infused creativity: An approach to creative system design,” Ambidextrous, Stanford’s Design School Magazine, Issue 1, Stanford, CA, 2005.
10. Y. Reich, Product Concept Innovation: Off the Shelf and Out of the Box, NIST, March 31, 2005.
11. Y. Reich, Product Concept Innovation: Off the Shelf and Out of the Box, Alliance for Innovative Manufacturing (AIM), Advisory Board Meeting, Stanford, April 5, 2005.
12. Y. Reich, Product Concept Innovation: Off the Shelf and Out of the Box, Design and Manufacturing Forum Lecture, Stanford, April 15, 2005.
13. Y. Reich, Product Concept Innovation: Off the Shelf and Out of the Box, General Motors Co., Warren, MI, June 15, 2005.
14. Y. Reich, Product Concept Innovation: Off the Shelf and Out of the Box, Ford Motors Co., Dearborn, MI, June 16, 2005.
15.
E. Subrahmanian and Y.
Reich, Advancing
Problem Definition and Concept Generation for Improved Product Life Cycle, International Conference on Trends in Product Life Cycle, Modeling,
Simulation and Synthesis, PLMSS-2006, 18-20 December, Bangalore,
India, 2006.
16.
Y. Reich, Three Essential Process Competencies of Systems
and Product Development, Indian Institute of Technology Bombay, January
5, Bombay, India, 2007.
17. Y. Reich, Israel 9th National Conference on
Quality, November 2007.
18. Y. Reich, Invited seminar on Design Theory, Ecole des Mines de Paris,
January 2008.
19. Y. Reich, Simple
tools for managing product development complexity, 2008 Israel-Germany
Bi-National Conference on Knowledge-based Integrative Product Development
and Manufacturing, February 2008.
20. Y. Reich, Simplicity leads to quality, Keynote
lecture, Quality Theory Conference, Ort Braude College, May 2008.
21. Y. Reich, 6th Seminar and Workshop on
Engineering Design in Integrated Product Development, EDIProD’2008, Gdynia, Poland, 2008.
22. Y. Reich, INCOSE-IL
Workshop on approaches to product development, October 2008.
23. Y. Reich, Robust
product concepts, BQR seminar, October 2008.
24.
Y. Reich, Invited
seminar on Design Theory, Ecole
des Mines de Paris, January 2009.
25. Y.
Reich, Is systems engineering a research discipline? Planning a Roadmap for
Systems Engineering Research, Technion, 2009.
26. Y.
Reich, Developing systems in dynamic environments, Research in Systems
Engineering Symposium, Technion, Haifa, Israel,
2009.
27. Y. Reich, The quality paradox in system development, 10th
Israeli National Conference on Quality, 2009.
(in Hebrew)
28. Y.
Reich, Design religions, DESIGN 2010, Dubrovnik, Croatia, 2010.
29. Y. Reich
and O. Shai, The Interdisciplinary Engineering
Knowledge Genome, Research in Systems Engineering Symposium, Technion, Haifa, Israel, 2010.
30. Y.
Reich, Creativity and Innovation Management Community Workshop 2010,
Paris.
31. Y. Reich, Lean? mean? How
do we really win? 18th Annual Conference of the International
Group for Lean Construction (IGLC), Haifa,
Israel, 2010.
32. Y. Reich, why do projects or systems fail?, ELOP 2010.
33. Subrahmanian, E, Reich, Y, Smulders,
F, Meijer, S.A., Designing: Weaving theories
of cognition and Design theories, 4th Design Theory SIG Workshop, Paris,
31 January-2 February 2011.
34. O. Shai
and Y. Reich, Designing to Design Interdisciplinary Engineering Knowledge
Genome: perspective and new results, 4th Design Theory SIG Workshop,
Paris, 31 January-2 February 2011.
35. Y.
Reich, Paper publishing workshop, Grenoble, February, 2011.
36. Y. Reich
and O. Shai, Managing
Projects Complexity with Design Structure Matrix and the Interdisciplinary
Engineering Knowledge Genome, Research in Systems
Engineering Symposium, Technion, Haifa, Israel,
2011.
37. Y. Reich, Design Theory: Why, What and How?
Experience of the Design Theory SIG, Chair of Design Theory and Methods for
Innovation Event, Paris, Mine ParisTech, February
2, 2012.
38.
Y.
Reich, Designing Ourselves and Design Religions, Alta Scuola
Politecnica (ASP) - Design Methods, Belgirate, Italy, May 18, 2012.
39.
Y.
Reich, M. Samson, Innovation leaders, Lake Como, October 2012.
40.
Y.
Reich, Designing Ourselves and Design Religions, Alta Scuola Politecnica
(ASP) - Design Methods, Belgirate, Italy, May 23-24, 2013.
1. Y. Reich, “Constructive induction by incremental concept formation,” in Artificial Intelligence and Computer Vision (Y. A. Feldman and A. Bruckstein, eds.), pp. 191–204, Amsterdam: Elsevier Science Publishers, 1991.
2. Y. Reich and S. J. Fenves, “The formation and use of abstract concepts in design,” in Concept Formation: Knowledge and Experience in Unsupervised Learning (D. H. J. Fisher, M. J. Pazzani, and P. Langley, eds.), (Los Altos, CA), pp. 323–353, Morgan Kaufmann, 1991.
3. Y. Reich and S. J. Fenves, “Inductive learning of bridge design knowledge,” in Knowledge Acquisition in Civil Engineering (T. Arciszewski and L. A. Rossman, eds.), pp. 169–189, New York, NY: American Society of Civil Engineers, 1992.
4. Y. Reich, “Text and reference books on knowledge acquisition and machine learning,” in Knowledge Acquisition in Civil Engineering (T. Arciszewski and L. A. Rossman, eds.), pp. 204–214, New York: American Society of Civil Engineers, 1992.
5. E. Subrahmanian, S. L. Konda, S. N. Levy, I. A. Monarch, Y. Reich, and A. W. Westerberg, “Computational support for shared memory in design,” in Automation-Based Creative Design: Research Research & Perspectives (A. Tzonis and I. White, eds.), (Amsterdam), Elsevier Science Publishers, 1994.
6. Y. Reich, “Macro and micro perspectives of multistrategy learning,” in Machine Learning: A Multistrategy Approach, Vol. IV (R. S. Michalski and G. Tecuci, eds.), (San Francisco, CA), pp. 379–401, Morgan Kaufmann, 1994.
7. Y. Reich, “Computational quality function deployment is knowledge intensive engineering,” in Knowledge Intensive CAD (T. Tomiyama, M. Mantyla, and S. Finger, eds.), pp. 315-334, (London, UK), Chapman & Hall, 1996.
8.
Y. Reich, “AI-supported
quality function deployment,” in Artificial Intelligence in Economics and
Management (P. Ein-Dor, ed.), (Boston, MA), pp.
91–106, Kluwer, 1996.
Invited Reprint in: IT-Enabled Quality Management Systems (S. J.
Krishna ed.), pp. 46-63, ICFAI University Press, Hyderabad, India, 2005.
9. I. A. Monarch, S. L. Konda, S. N. Levy, Y. Reich, E. Subrahmanian, and C. Ulrich, “Mapping sociotechnical networks in the making,” in Social Science, Technical Systems, and Cooperative Work (G. C. Bowker, L. S. Star, W. Turner, and L. Gasser, eds.), (Hillsdale, NJ), pp. 331–354, Lawrence Erlbaum, 1997.
10. Y. Reich, "Collaborative environments for agile design," in Changing Product Development: Trends in User Centered Computer Supported Product Development (F.-L. Krause and K. Preiss, eds.), (Bethlehem, PA), Agility Forum, 1997.
11. Y. Reich, “What is wrong with CAE and can it be fixed,” in Bridging the Generations: The Future of Computer-Aided Engineering, pp. 259-265, (Pittsburgh, PA), Department of Civil Engineering, Carnegie Mellon University, 1999.
12. Y. Reich, “Synthesis and theory of knowledge: GDT as a theory of knowledge, and its implication to design,” in Engineering Design Synthesis: Understanding, Approaches, and Tools (A. Chakrabarti, ed.), pp. 35-48, (Berlin), Springer Verlag, 2002.
13.
Y. Reich, “Data mining of
design products and processes,” in Data Mining and Knowledge Discovery
Handbook: A Complete Guide for Practitioners and
Researchers (O. Maimon, and L. Rokach, eds.), pp. 1167-1187, (Boston, MA), Kluwer, 2005.
14. S. Meijer, Y. Reich, E. Subrahmanian, The future of gaming for design of complex systems. In Back to the Future of Gaming, forthcoming.
1.
Y. Reich
and M. Eisenberger, “Optimum shape design of columns
for buckling,” in Steel Structures, Proceedings of Structures Congress ’89 (J.
S. B. Iffland, ed.), (San Francisco, CA), pp.
677–685, ASCE, 1989.
2.
M. Eisenberger and Y. Reich, “Buckling of variable
cross-section columns,” in Steel Structures, Proceedings of Structures Congress
’89 (J. S. B. Iffland, ed.), (San Francisco, CA),
pp. 443–451, ASCE, 1989.
3.
Y.
Reich, “Converging to “Ideal” design knowledge by learning,” in Proceedings
of The First International Workshop on Formal Methods in Engineering Design (P.
A. Fitzhorn, ed.), (Fort Collins, Colorado), pp.
330–349, Colorado State University, 1990.
4.
M. Eisenberger and Y. Reich, “Knowledge-based model generation
for finite element analysis,” in Proceedings of The 1991 ANSYS Conference
& Exhibition, (Pittsburgh, PA), pp. 1.13–1.20, Swanson Analysis Inc.,
1991. Invited Reprint in Finite Element News, 5:32-38, October
1993.
5.
Y.
Reich, R. Coyne, A. Modi, D. Steier, and E.
Subrahmanian, “Learning in design: An EDRC (US) perspective,” in Artificial
Intelligence in Design’91, Proceedings of The First International Conference on
Artificial Intelligence in Design, Edinburgh, UK (J. Gero, ed.), (Oxford,
UK), pp. 303–321, Butterworths, 1991.
6.
Y.
Reich, “Designing integrated learning systems for engineering design,” in Proceedings
of The Eight International Workshop on Machine Learning (Evanston, IL) (L.
Birnbaum and G. C. Collins, eds.), (San Mateo, CA), pp. 635–639, Morgan
Kaufmann, 1991.
7.
Y.
Reich, “Macro and micro perspectives of multistrategy
learning,” in Proceedings of the First International Workshop on Multistrategy Learning (R. S. Michalski and G. Tecuci, eds.), (Fairfax, VA), pp. 97–112, Center for
Artificial Intelligence, George Mason University, 1991.(Contains details that
do not appear in the corresponding book chapter).
8.
Y.
Reich, “Generation of examples for training a learning design system,” in Proceedings
Computing in Civil Engineering (Dallas, TX) (B. J. Goodno
and J. R. Wright, eds.), (New York, N.Y.), pp. 999–1006, ASCE, 1992.
9.
Y.
Reich, S. Konda, I. Monarch, and E. Subrahmanian, “Participation and design: An
extended view,” in PDC’92: Proceedings of the Participatory Design
Conference (Cambridge, MA) (M. J. Muller, S. Kuhn, and J. A. Meskill, eds.), (Palo Alto, CA), pp. 63–71, Computer
Professionals for Social Responsibility, 1992.
10. Y. Reich, “The value of design knowledge,” in Proceedings
of The Seventh Banff Knowledge Acquisition for Knowledge-Based Systems Workshop
(B. R. Gaines, M. A. Musen, and J. H. Boose, eds.), (Calgary, Alberta, Canada), pp. 21–1–21–20, SRDG
Publications, 1992.
11. I. A. Monarch, S. L. Konda, S. N. Levy, Y.
Reich, E. Subrahmanian, and C. Ulrich, “Shared memory in design: Theory and
practice,” in Proceedings of the Invitational Workshop on Social Science
Research, Technical Systems and Cooperative Work (Paris, France), (Paris,
France), pp. 227–241, D´epartment Sciences Humaines et Sociales, CNRS, 1993.
12. E. Subrahmanian, R. Coyne, S. L. Konda, S. N.
Levy, R. Martin, I. A. Monarch, Y. Reich, and A. W. Westerberg, “Support system
for different-time different-place collaboration for concurrent engineering,”
in Proceedings of the 2nd IEEE Workshop on Enabling Technologies
Infrastructure for Collaborative Enterprises (WET ICE), (Los Alamitos, CA),
pp. 187–191, IEEE Computer Society Press, 1993.
13. Y. Reich, R. Karni,
and F. Fournier, “An investigation of machine learning approaches to knowledge
extraction from databases,” in Proceedings of The 10th Israeli Symposium on
Artificial Intelligence, Computer Vision, and Neural Networks (R. Basri, U. J. Schild, and Y.
Stein, eds.), pp. 119–128, Information Processing Association of Israel, 1993.
14. Y. Reich, “What is wrong with CAE and can it be
fixed,” in Preprints of Bridging the Generations: An International Workshop
on the Future Directions of Computer-Aided Engineering, (Pittsburgh, PA),
Department of Civil Engineering, Carnegie Mellon University, 1994.
15. A. W. Westerberg, R. Coyne, D. Cunningham, A. Dutoit, E. Gardner, S. Konda, S. Levy, I. Monarch, R.
Patrick, Y. Reich, E. Subrahmanian, M. Terk, M.
Thomas, Distributed and collaborative computer-aided environment in process
engineering design, in: Proceedings of ISPE, 1995.
16. Y. Reich, “Computational quality function
deployment is knowledge intensive engineering,” in Proceedings of
KIC-1: International Workshop on Knowledge Intensive CAD (T. Tomiyama and
M. Mantyla, eds.), pp. 401-419, 1995.
17. Y. Reich, “AI-supported quality function
deployment,” in Proceedings of the Fourth International Workshop on
Artificial Intelligence in Economics and Management, (Ramat Aviv, Israel),
5p., Faculty of Management, Tel Aviv University, 1996.
18. Y. Reich, “Collaborative environments for agile
design,” in CIEME: Israel-Germany Bi-National Conference on Computer
Integrated Extended Manufacturing Enterprise, 1996. Republished in The
Computer-Integrated Extended Manufacturing Enterprise (F.-L. Krause, K. Preiss, M. Shpitalni, and A. Shtub, eds.), pp. 101-107, (Bethlehem, PA), Agility Forum,
1997.
19. A. W. Westerberg, E. Subrahmanian, Y. Reich,
and S. Konda, “Designing the process design process,” in Proceedings of
PSESCAPE 97, 1997. Invited paper.
20. E. Subrahmanian, Y. Reich, S. L. Konda, A. Dutoit, D. Cunningham, R. Patrick, M. Thomas, and A. W.
Westerberg, “The n-dim approach to building design support systems,” in Proceedings
of ASME Design Theory and Methodology DTM ’97, (New York, NY), ASME, 1997.
21. Y. Reich, V. Bertram, and J. Friesch, “The development of a decision support system for
propeller design,” in Proceedings of the 9th International Conference on
Computer Applications in Shipbuilding (ICCAS ’97), 1997.
22. Y. Reich, “Effective life-cycle knowledge
management,” in Proceedings of The SME Workshop on Engineering Knowledge
Management (Y. Reich, ed.), (Tel Aviv), pp. 2–9, SME Chapter 319, Israel,
1999.
23. Y. Reich and O. Shai, “MEMSIS - a MEMS information
system,” in Proceedings of CIRP Design Seminar (M. Shpitalni,
ed.), (Haifa, Israel), pp. 193–197, 2000.
24. Y. Reich, “Preliminary product design
decision-making,” in 2000 International Symposium on Modeling of Synthesis,
University of Tokyo, Tokyo, pp. 249-261, 2000. Invited paper.
25. G. Dobrescu and Y.
Reich, “Design of gradual modular platform and variants for a layout product
family,” in Proceedings of ICED 2001, (London), Institution of
Mechanical Engineers, 2001.
26. E. Levy and Y. Reich, “Dynamically managing
product design quality under resource constraints,” in Proceedings of ICED
2001, (London), Institution of Mechanical Engineers, 2001.
27. D. Braha and Y. Reich, “Topological structures
for modeling engineering design processes,” in Proceedings of ICED 2001,
(London), Institution of Mechanical Engineers, 2001.
28. A. Moshaiov, O. Kaynak, Y. Reich, S. Bar-El, A. Klunover,
and L. Akin, “Evaluating groupwork in
tele-collaboration - application to socio-mechatronics,” in ITHET 2002,
2002.
29. Y. Reich and A. Ziv-Av,
“A comprehensive optimal product concept generation framework,” in Proceedings
of the 15th International Conference on Design Theory and Methodology (DTM),
(New York, NY), ASME, 2003.
30. Y. Sered and Y.
Reich, “Standardization and modularization driven by minimizing overall process
effort,” in Proceedings of the 15th International Conference on Design
Theory and Methodology (DTM), (New York, NY), ASME, 2003.
31. A. Ziv-Av and Y.
Reich, “SOS – Subjective Objective System for generating optimal product
concepts,” in CD-ROM Proceedings of the 14th International Conference on
Engineering Design (ICED), The Design Society, 2003.
32. A. Schor and Y.
Reich, “Improving the robustness of multicriteria
decision making,” in CDROM Proceedings of the 14th International Conference
on Engineering Design (ICED), The Design Society, 2003.
33. O. Shai and Y. Reich, “Infused design: A brief
introduction,” in CD-ROM Proceedings of the 14th International Conference on
Engineering Design (ICED), The Design Society, 2003.
34. Y. Reich, E. Kolberg, and I. Levin, “Designing
contexts for learning design,” in Proceedings of Mudd
Design Workshop V, 2005.
35. O. Shai, Y. Reich, and D. Rubin, “Infused
Creativity: An Approach to Creative System Design,” in Proceedings of the
17th International Conference on Design Theory and Methodology (DTM), (New
York, NY), ASME, 2005.
36. E. Kolberg, Y. Reich, and I. Levin,
“Transforming design education by design,” in Proceedings of the 17th
International Conference on Design Theory and Methodology (DTM), (New York,
NY), ASME, 2005.
37. Y. Reich, E. Kolberg, and I. Levin, “Designing
designers,” in CDROM Proceedings of the 15th International
Conference on Engineering Design (ICED), The Design Society, 2005.
38. Y. Reich and A. Ziv-Av,
“Robust product concept generation,” in CDROM Proceedings of the 15th
International Conference on Engineering Design (ICED), The Design Society,
2005.
39. E. Subrahmanian and Y. Reich, Advancing Problem Definition and Concept
Generation for Improved Product Life Cycle, International Conference
on Trends in Product Life Cycle, Modeling, Simulation and Synthesis, PLMSS-2006,
18-20 December, Bangalore, India, 2006. Invited paper.
40. A. Karniel and Y.
Reich, “Simulating Design Processes with self-iteration activities based on DSM
planning,” in proceedings of the International Conference on Systems
Engineering and Modeling - ICSEM'07, Haifa, 2007.
41. A. Karniel and Y.
Reich, “Managing dynamic new product development processes,” CD proceedings
of the INCOSE International Symposium (INCOSE 2007), San Diego, CA,
2007.
42. E. Kolberg, Y. Reich, and I. Levin, “Design of
design methodology for autonomous robots,” CD proceedings, RoboCup 2007 Symposium, Atlanta, 2007.
43. E. Kolberg, Y. Reich,
and I. Levin, Express engineering change management, in CDROM
Proceedings of the 16th International Conference on Engineering
Design (ICED), The Design Society, 2007.
44. Reich, Y., Ullmann, G., Van der Loos, M., Leifer, L., Perceptions of coaching in product development teams, in CDROM
Proceedings of the 16th International Conference on Engineering
Design (ICED), The Design Society, 2007.
45. A. Karniel
and Y. Reich, Coherent interpretation of DSM plan to PDP simulation, in CDROM
Proceedings of the 16th International Conference on Engineering
Design (ICED), The Design Society, 2007.
46. Y. Reich, “Preventing Breakthroughs from
Breakdowns,” Proceedings of the 9th Biennial ASME Conference on Engineering
Systems Design and Analysis ESDA2008, Haifa, Israel, 2008.
47. Y. Reich, O. Shai, E. Subrahmanian, A. Hatchuel, P. Le Masson, “The interplay between design and
mathematics: Introduction to bootstrapping effects,” Proceedings of the 9th
Biennial ASME Conference on Engineering Systems Design and Analysis ESDA2008,
Haifa, Israel, 2008.
48. O. Shai, Y. Reich, A. Hatchuel,
E. Subrahmanian, Creativity theories and scientific discovery: a study of C-K
Theory and Infused Design, International Conference on Engineering Design,
ICED'09, Stanford, CA, 2009. Outstanding paper award.
49. A. Karniel and Y.
Reich, Statistical analysis of process simulations, International Conference
on Engineering Design, ICED'09, Stanford, CA, 2009.
50. S. Menachem, Y. Reich, Improving effectiveness
of agile development, International Conference on Engineering Design,
ICED'09, Stanford, CA, 2009.
51. O. Shai, Y. Reich,
Inventing a new metho
52. Rosenstein, D. Reich, Y., Hierarchical Concept
Generation by SOS, International Conference on Engineering Design, ICED'11,
Copenhagen, Denmark, 2011.
53. Hatchuel, A., Le
Masson, P., Reich, Y., Weil, B., A systematic approach of
design theories using generativeness and robustness,
International Conference on Engineering Design, ICED'11, Copenhagen,
Denmark, 2011.
54. Karniel, A.
Reich, Y., Rules for implementing
dynamic changes in DSM-based plans, International
Conference on Engineering Design, ICED'11, Copenhagen, Denmark, 2011.
55. Shai, O. Reich, Y., Understanding engineering systems through the engineering
knowledge genome: structural genes of systems topologies, international
Conference on Engineering Design, ICED'11, Copenhagen, Denmark, 2011.
56. Subrahmanian, E, Reich, Y, Smulders,
F, Meijer, S.A, “Designing: Insights from Weaving Theories of Cognition and
Design Theories, In eProceesings
International Conference on Engineering Design, ICED'11, Copenhagen,
Denmark, 2011.
57. Subrahmanian, E, Reich, Y, Smulders,
F, Meijer, S.A., Design as a synthesis of spaces: using the P-S framework, Proceedings
of IASDR2011, the 4th World Conference in Design Research,
Delft, The Netherlands, 2011.
58. Helfman Cohen Y., Reich Y. Greenberg S., What
can we learn from natural systems when applying the law of system completeness?
TRIZ Future 2011, Dublin, Ireland, 2011.
59. Engel A., Reich Y., Browning T.R., Schmidt D.M., Optimizing system
architecture for Adaptability, International Design Conference - DESIGN 2012,
Dubrovnik, Croatia, 2012.
60. Helfman Cohen Y., Reich Y. Greenberg S.,
Substance field analysis and biological functions, TRIZ Future 2012,
Lisbon, Portugal, 2012.
61. Engel A., Reich Y., Architecting Systems for
Optimal Lifetime Adaptability, In eProceedings International
Conference on Engineering Design, ICED'13, Seoul, South Korea, 2013.
62. Subrahmanian E., Reich Y., Krishnan S., Context, collaboration and
complexity in designing: The pivotal role of cognitive artifacts, In eProceedings International Conference on Engineering
Design, ICED'13, Seoul, South Korea, 2013.
63. Hatchuel, A.,
Reich, Y., Le Masson, P., Weil, B., Kazakci, A., Beyond Models and Decisions:
Situating Design Through Generative Functions, In eProceedings
International Conference on Engineering Design, ICED'13, Seoul, South
Korea, 2013.
64. Helfman
Y., Reich Y. Greenberg S. Sustainability strategies in nature. Design &
Nature, Opatija, 2014.
1.
E. Berkovitz, Y. Reich, and P. Bar-Yossef, “The effect of the superstructure on the
longitudinal strength of ships,” in The 19th Israel Conference on Mechanical
Engineering, (Beer-Sheva, Israel), pp. 3.5.1–6,
1985. (In Hebrew).
2. Y. Reich and M. B. Fuchs, “Weight optimization of trusses subjected to several loading conditions by the explicit optimum design method,” in The 19th Israel Conference on Mechanical Engineering, (Beer-Sheva, Israel), pp. 2.5.4–8, 1985. (In Hebrew).
3. Y. Reich, “Incremental unsupervised constructive induction.” Poster presented at the Eight International Workshop on Machine Learning (Evanston, IL), 1991.
4. Subrahmanian, S. L. Konda, S. N. Levy, Y. Reich, and A. W. Westerberg, “Modeling and analysis in design,” in Proceedings of the AID’92 Workshop on Preliminary Stages of Engineering Analysis and Modeling, 1992.
5. Y. Reich and E. Subrahmanian,
“Concurrent engineering: An extended view,” in Proceedings of the AID’92
Workshop on Concurrent Engineering, 1992.
6. R. Karni, Y. Reich, and F. Fournier, “Towards learning in concurrent engineering design,” in Proceedings of the AID’92 Workshop on Machine Learning, 1992.
7. S. L. Konda, S. Levy, I. Monarch, Y. Reich, and E. Subrahmanian, “Engineering design, and CSCW: Shared memory as the integration of multiple disciplines,” in Preprints of the Workshop on Interdisciplinary Theory for CSCW Design, CSCW ’92 (Toronto, Canada), 1992.
8. Westerberg, E. Subrahmanian, Y. Reich, S. Levy, S. Konda, and R. Coyne, “n-dim: An information modeling environment for collaborative engineering design,” in Preprints of the Workshop on Integration and Architectures for CSCW, CSCW ’92 (Toronto, Canada), 1992.
9. Y. Reich, S. J. Fenves, and E. Subrahmanian, “Flexible extraction of practical knowledge from bridge databases,” in Proceedings of the First Congress on Computing in Civil Engineering (Washington, DC), (New York, NY), pp. 1014–1021, American Society of Civil Engineers, 1994.
10. Y. Reich, “Towards practical machine learning techniques,” in Proceedings of the First Congress on Computing in Civil Engineering (Washington, DC), (New York, NY), pp. 885–892, ASCE, 1994.
11. Y. Reich, “Extending the scope of
CAD,” in Proceedings of the 25th Israel Conference on Mechanical Engineering,
(Haifa, Israel), pp. 101–103, Technion, 1994.
12. Y. Reich, “Information management for marine engineering projects,” in Proceedings of the 25th Israel Conference on Mechanical Engineering, (Haifa, Israel), pp. 408–410, Technion, 1994.
13. Y. Reich and The n-dim Group, “A human-centered enterprise information system for agile design,” in Proceedings of the 15th Israeli Conference on Advanced Technologies in Engineering, Management, and Manufacturing, pp. 264–270, SME, 1995.
14. Y. Reich and N. Travitzky, “Learning material analysis and design knowledge
from databases,” in Proceedings of The 26th Israel Conference on Mechanical
Engineering, (Haifa, IL), pp. 176–178, Technion,
1996.
15. Y. Reich and I. Kaptsan, “Capturing electronic packaging design rationale
by an artifact centered linguistic approach.” Paper presented at The 26th
Israel Conference on Mechanical Engineering, 1996.
16. Y. Reich, L. Konda, S., and E. Subrahmanian, “A consistent approach to PDM (or IT) implementation,” in Proceedings of The 27th Israel Conference on Mechanical Engineering, pp. 421–423, 1998.
17. S. V. Barai and Y. Reich, “Experience with ‘engineering data’ in neural networks modeling,” in Proceedings of The 27th Israel Conference on Mechanical Engineering, pp. 424–426, 1998.
18. Y. Reich and V. Bertram, “Propeller design incorporating knowledge-based techniques,” in Workshop on Artificial Intelligence and Optimization for Marine Applications, (Hamburg, Germany), 1998.
19. Y. Reich and S. V. Barai, “Creating better models of marine propeller behaviour data with neural networks,” in Workshop on Artificial Intelligence and Optimization for Maritime Applications, (Hamburg, Germany), 1998.
20. Y. Reich, “Life-cycle management of technical knowledge using information technology,” in Proceedings of The 5th Israel Conference on Quality, 1999.
21. G. Dobrescu and Y. Reich, “Product family design through concurrent common platform generation and modular variants standardization,” in Proceedings of 28th Israel Conference on Mechanical Engineering, 2000.
22. S. K. Barai
and Y. Reich, “Data mining of experimental data: Neural networks approach,” in 2nd
International Conference on Theoretical, Applied, Computational and
Experimental Mechanics,, IIT Kharagpur, India,
2001.
23. S. V. Barai and Y. Reich, “Weld classification in radiographic images: Data mining approach,” in Proceedings of NDE2002 (Non-Destructive Evaluation), (Chennai, India), 2002.
24. Ziv-Av and Y. Reich, “Optimal generation of design
concepts,” in Proceedings of the 29th Israel Conference on
Mechanical Engineering, (Haifa, Israel), 2003.
25. Y. Sered and Y. Reich, “Process driven standardization and modularization,” in Proceedings of the 29th Israel Conference on Mechanical Engineering, (Haifa, Israel), 2003.
26. Paz and Y. Reich, “Tradeoff between customer requirements reliability and product quality in new product design,” in Proceedings of the 29th Israel Conference on Mechanical Engineering, (Haifa, Israel), 2003.
27. T. Pechter
and Y. Reich, “A method for finding the structure and tuning parameters of
systems,” in Proceedings of the 29th Israel Conference on Mechanical
Engineering, (Haifa, Israel), 2003
28. O. Shai and Y. Reich, “Infused design: Bootstrapping design practice,” in Proceedings of the 29th Israel Conference on Mechanical Engineering, (Haifa, Israel), 2003.
29. Yuri, A. Karniel,
and Y. Reich, “Large scale reverse engineering with constraints,” in Proceedings
of the 29th Israel Conference on Mechanical Engineering, (Haifa, Israel),
2003.
30. Schor and Y. Reich, “Improving the robustness of multicriteria decision making,” in Proceedings of the
29th Israel Conference on Mechanical Engineering, (Haifa, Israel), 2003.
31. Karniel and Y. Reich, “Dynamic evolution of product design
process,” The 30th Israeli Conference on Mechanical Engineering,
2005.
32. Ziv-Av and Y. Reich, “Optimal robust concepts and
configurations,” The 30th Israeli Conference on Mechanical
Engineering, 2005.
33. Reich, and A. Ziv-Av,
“Generating robust robot concepts,” First Israeli Conference on Robotics,
Tel Aviv, 2006.
34. E. Kolberg, Y. Reich, and I.
Levin, “Designing design
methodologies for robotics products,” First Israeli Conference on Robotics,
Tel Aviv, 2006.
35. E. Kolberg, Y. Reich, and I.
Levin, “Analysis of adapting
engineering design methods to high school educational robotics project,” First
Israeli Conference on Robotics, Tel Aviv, 2006.
36. Karniel and Y. Reich, “From planning to executing NPD
processes,” CD proceedings of the 4th National Conference on
Systems Engineering (INCOSE IL), Herzlia, 2007.
37. E. Kolberg, Y. Reich, and I.
Levin, “Design methodology for mobile robots,” presented at The 9th Bar-Ilan
Symposium on the Foundations of Artificial Intelligence (BISFAI 2007),
Bar-Ilan University, Ramat Gan, Israel, 2007.
38. Y. Reich, "From a nightmare
to a planned process," presented at The 11th Conference of
the Project Management Institute Israel Chapter, 2007.
39. O.
Dor and Y. Reich, CHECKUP: A feature
generation rule-base learner, The Israeli Association for Artificial
Intelligence, IAAI07 Symposium, Ashkelon College, 2007.
40. Y.
Reich, The quality paradox in system development, 10th Israeli
National Conference on Quality, 2009.
(in Hebrew) Invited paper.
41. Y.
Reich, If I don’t have design what do I have, Engineers and Product
Designers Meeting, Association of Engineers, Architects and Graduates of
Technological Sciences in Israel, 2010.
42. Y. Reich and M. Samson,
integrating academy, industry, and society for advancing national
competitiveness - The need for innovative design, 2nd Industry
Academy Conference – Industry Directed Innovation, Braude
College, 2011.
43. Engel, A. and Reich, Y., Project AMISA: Architecting
Manufacturing Industries and Systems for Adaptability, The 32nd
Israeli Conference on Mechanical Engineering, Tel Aviv, Israel, 2012.
44. Helfman Cohen, Y., Reich, Y., and Grinberg,
S., Integrating TRIZ Knowledge Through Biomimetic
Design, The
32nd Israeli Conference on Mechanical Engineering, Tel Aviv,
Israel, 2012.
45. Samson M. and Reich, Y., A roadmap for innovating engineering
education in Israel, The 32nd Israeli Conference on Mechanical
Engineering, Tel Aviv, Israel, 2012.
46. Sitton,
M. Reich, Y., Enterprise systems engineering challenges, In
ePcoceedings Israeli Conference on Systems
Engineering, INCOSE-IL, 2013.
47. Engel, A., Reich, Y., The AMISA research project, In ePcoceedings Israeli Conference on Systems Engineering,
INCOSE-IL, 2013.
Copyright © 2005-2013 Yoram Reich
Last modified: 7/31/2014 4:38:00 PM